2022 LEXUS NX300h Owners Manual

Systemcomponents
A
Meter
If a vehicle approaching from the right or
left at the rear of the vehicle is detected, a
buzzer will sound.
B
Outside rear view mirror indicators
When a vehicle approaching from the right
or left at the rear of the vehicle is detected,
both outside rear view mirror indicators will
flash.
C
Center display
If a vehicle approaching from the right or
left at the rear of the vehicle is detected,
the RCTA icon for the detected side will be displayed on the center display. Turning the
RCTA function on/off on the center display.
This illustration shows an example of a vehicle
approaching from both sides of the vehicle.
INFORMATION

AApproaching vehiclesB
Detection areas of approaching vehicles
RCTAicondisplay
When a vehicle approaching from the right or left at the rear of the vehicle is
detected, the following will be displayed on the center display.
Example: Vehicles are approaching from both
sides of the vehicle (Example: Vehicles with a
Lexus parking assist monitor)
RCTAfunctiondetectionareas
The areas that vehicles can be detected in are outlined below.
The buzzer can alert the driver of faster vehicles
approaching from farther away.
Example:

1Select .
2 Select [Driving assist@.
3 Select [Rear cross traffic alert@.
When the RCTA function is disabled, the driving assist infomation indicator illumi-
nates on the multi-information display.
(Each time the power switch is turned off then changed to ON, the RCTA function
will be enabled automatically.)
ChangingtheRCTAbuzzervolume
The buzzer volume can be adjusted on the center display.
1 Select
.
2 Select [Driving assist@.
3 Select [Collision mitigation@.
4 Select [Parking assist volume@.
TemporarilymutingtheRCTAbuzzer
A mute button will be displayed on the center display when an object is detected.To mute the buzzer, select
.To mute the buzzer, select . The buzzers for the
intuitive parking assist sensor, RCTA and RCD function will be muted simultane-
ously.
INFORMATIONMute will be canceled automatically in the following situations:

Buzzerandscreennotificationswhentravelingatalowspeedandapedestrianisdetectedattherear *
PurposeoftheRCD(RearCameraDetection)
When the vehicle is backing up, the rear camera detection function can detect
pedestrians in the detection area behind the vehicle. If a pedestrian is detected, abuzzer will sound and an icon will be displayed on the center display to inform thedriver of the pedestrian.
WARNING

INFORMATION

RIf the suspension has been modified or tires of a size other than specified are
installed
R When install market electronic parts (such as Illuminated license plate, fog lamps,
etc.) in the camera vicinity
R When install market protection parts (bumper trim, etc.) to the rear bumper

RIf the temperature in the cabin is extremely high or low, the audio system screen
may not operate correctly.
RCDfunction
CenterDisplay
A
Pedestrian detection icon
Displayed automatically when a pedestrian
is detected.
(Each time the power switch is turned off
then changed to ON, the RCD function will
be enabled automatically.)
Whenapedestrianisdetected
If the rear camera detection function detects a pedestrian in the detection area, the
buzzer and pedestrian detection will operate as follows:
A
If a pedestrian is detected in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
B
If a pedestrian is detected in area
Buzzer (When the vehicle is stationary):
Sounds 3 times
Buzzer (When the vehicle is backing up,when a pedestrian approaches the rear of
the vehicle): Sounds repeatedly
Pedestrian detection icon: Blinks
C
If the system determines that your vehicle
may collide with a pedestrian in area
Buzzer: Sounds repeatedly
Pedestrian detection icon: Blinks
ChangingtheRCDsettings
TurningtheRCDfunctionON/OFF
The RCD function can be enabled/disabled on the center display as follows:
6-2.Usingthesafedrivingsupportfunctions4216
Driving support system A
B
C

1Select .
2 Select [Driving assist@.
3 Select [Rear camera detection@.
When the RCD function is disabled, the driving assist infomation indicator illumi-
nates on the multi-information display.
ChangingtheRCDbuzzervolume
The buzzer volume can be adjusted on the center display.
1 Select
.
2 Select [Driving assist@.
3 Select [Collision mitigation@.
4 Select [Parking assist volume@.
TemporarilymutingtheRCDbuzzer
A mute button will be displayed on the center display when an object is detected.To mute the buzzer, select
.To mute the buzzer, select . The buzzers for
the intuitive parking assist sensor, RCTA and RCD function will be muted simulta-
neously.
INFORMATIONMute will be canceled automatically in the following situations: