2021 MERCEDES-BENZ V-CLASS MPV warning

Yo
u can choose between thefo llowing settings:
R Off
R Standard: normal sy stem sensitivity.
R Sensitive: higher sy stem sensitivity. The driver
is wa rned earlier and the attention le vel
de tected bythe sy stem (Attention Le vel) is
adap ted according ly. Tr
af fic Sign Assist Fu
nction of Traf fic Sign Assist
Tr af fic Sign Assi staids youby displaying de tected
speed limits and overtaking restrictions in the
instrument clus ter.
Since Traf fic Sign Assi stalso uses the data
st ored in the navigation sy stem, it can also
update the display without de tecting traf fic signs.
The came raalso de tects traf fic signs wi th a
re striction indicated byan additional sign (e.g.
when wet).
% Traf fic signs are only displa yed with the
re striction indicated byan additional sign in
th efo llowing cases:
R the traf fic signs must be obser ved with
th ere striction
R the sy stem is unable toclea rly de term ine
whe ther there striction applies
If th e sy stem de tects that you are driving on to a
section of road in the wrong direction of tra vel, it
triggers a warning. This function is not available
in all countries.
Tr af fic Sign Assi stis only an aid and is not alw ays
able tocor rectly display speed limits and overtak‐
ing restrictions. The actual traf fic signs al ways
ha ve priority over theTr af fic Sign Assi stdispla y.
Obser vethe no tes on driving sy stems and your
re sponsibility; you may otherwise failto recog‐
nise dangers (/ page 153).
Ins trument clus ter display
The Traf fic Sign Assi stdisplay appears in the
Assistance graphic menu ofthe on-board com‐
puter (/ page183). 1
Perm issible speed
2 Perm issible speed when there is a restriction
3 Additional sign with restriction (e xample:
unknown restriction)
If Traf fic Sign Assi stis not available or cannot
de term ine the maximum permissible speed, the
fo llowing display appears in the assis tance
graphic: Sy
stem limits
The sy stem may be impaired or may not function
in thefo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsuf fi‐
cient illumination of thero ad, highly variable
shade conditions, or due torain, sno w,fog or
heavy spr ay.
R Ifth ere is glare, e.g. from oncoming traf fic,
direct sunlight or reflections.
R Ifth ere is dirt on the windscreen in the vicin‐
ity of the multifunction camera or if the cam‐
era is mis ted up, damaged or obscured.
R Ifth e tra ffic signs are hard todetect, e.g. due
to dirt or sno w,or because they are co vered,
or due toinsuf ficient lighting.
R Ifth ere are ambiguous signs, e.g. traf fic signs
in road works or adjacent lanes.
R Ifth e information in the navigation sy stem's
digital map is incor rect or out-of-da te.
Ac tivating/deactivating the Traf fic Sign
Assist warning function
On-board computer
4 00E2 5
Settings 5
Assistance
5 Traffic Sign Assist #
Toactivate/deactivate: pressthe0076 but‐
to n. Driving and pa
rking 17 3

When
thewa rning function is active and you pass
a traf fic sign, the instrument clus ter sho wsthe
traf fic re gulations (speed limit and overtaking
re striction) forfive seconds. The pr evious menu
th en reappears automaticall y.
The wrong-w aywarning remains active if you
deactivate thewa rning function of Traf fic Sign
Assi st. Blind Spot Assist
Fu
nction of Blind Spot Assist
Blind Spot Assist uses two lateral, rear-facing
ra dar sensors tomonitor the area up to3 m
behind and 3 m directly next to yourvehicle. &
WARNING Risk of accident despite Blind
Spot Assi st
Blind Spot Assist does not react toeither sta‐
tionary objects or vehicles approaching and
ove rtaking you at a greatly di fferent speed.
Blind Spot Assist cann otwa rndrivers in these
situations. #
Always pay careful attention tothe traf‐
fi c situation and maintain a safe dis‐
ta nce at the side of theve hicle. Obser
vethe no tes on driving sy stems and your
re sponsibility; you may otherwise failto recog‐
nise dangers (/ page 153).
If a vehicle is de tected above speeds of appr ox‐
imately 30 km/h and this vehicle subsequently
enters the monitoring range di rectly next toyour
ve hicle, thewa rning lamp in the outside mir ror
lights up red.
If a vehicle is de tected close to yourvehicle in the
lateral monitoring range and you swit chon the
turn signal indica tor in the cor responding direc‐
tion, a warning tone sounds. The redwa rning
lamp in the outside mir rorflashes. If the turn sig‐
nal indicator remains switched on, all other
de tected vehicles are indicated only bytheflash‐
ing of there dwa rning lamp.
When youove rtake a vehicle, thewa rning only
occurs if the dif fere nce in speed is less than
11 km/h. Sy
stem limits
Blind Spot Assist may be limited in thefo llowing
situations:
R ifth ere is dirt on the sensors or the sensors
are obscured
R ifth ere is poor visibility, e.g. due tofog, heavy
ra in, snow or spr ay
R if nar rowvehicles are within the monitoring
ra nge, e.g. bicycles
R ifth ero ad has very wide or very nar row lanes
R ifve hicles are not driving in the middle of
th eir lane
Wa rnings may be issued in er ror when driving
close tocrash barr iers or similar solid lane bor‐
ders. Warnings may be inter rupte d when driving
alongside long vehicles, forex ample lor ries, for a
prolonged time.
Blind Spot Assist is not operational when reve rse
ge ar is engaged.
If yo u couple up a trailer, make sure that you ha ve
cor rectly es tablished the electrical connection.
Blind Spot Assist is then deactivated and the
Blind Spot Assist currently unavailable See Own-
er's Manual message appea rsinthe multifunc‐
tion displa y.
Ac tivating/deactivating Blind Spot Assi st
On-board computer:
4 00E2 5
Settings 5
Assistance
5 Blind Spot Assist #
Toactivate/deactivate: pressthe0076 but‐
to n.
When Blind Spot Assi stis activated, grey radar
wav es propagating backwards appear next tothe
ve hicle in the assis tance graphic in the multifunc‐
tion displa y.Ifyo u drive fasterthan 30 km/h with
Blind Spot Assist activated, thera dar waves in
th e assis tance graphic appear green. Blind Spot
Assi stisready for use.
If yo u swit chon the ignition while Blind Spot
Assist is activated, thewa rning lamps in the out‐
side mir rors light up for appro x.1.5 seconds. Lane
Keeping Assist Fu
nction of Lane Keeping Assist
Lane Keeping Assist ser vesto protect you against
unin tentionally le aving your lane. You are also
wa rned bya vibration in thesteering wheel and
by thest atus symbol flashing in the instrument 174
Driving and pa rking

clu
ster. Lane Keeping Assist is only an aid and is
not intended tokeep theve hicle in the lane with‐
out the driver's cooperation.
Obser vethe no tes on driving sy stems and your
re sponsibility; you may otherwise failto recog‐
nise dangers (/ page 153).
The function is available in the speed range
between 60 km/h and 200 km/h.
The warning is issued when thefo llowing condi‐
tions are met at the same time:
R If Lane Keeping Assist de tects lane markings.
R If a front wheel drives over lane markings.
To ensure that you are warned only when neces‐
sary and in good time if you cross the lane mark‐
ing, the sy stem de tects cer tain conditions and
wa rnsyo u accordin gly.
The warning vibration occurs earlier under the
fo llowing conditions:
R you approach the outer lane marking on a
bend.
R thero ad has very wide lanes, e.g. a mo tor‐
wa y.
R the sy stem de tects solid lane markings.
The warning vibration occurs later under thefo l‐
lowing conditions:
R you are driving on a road with nar row lanes.
R you cut the corner on a bend.
% Yo
u may also be warned bya vibration in the
st eering wheel (4x2 model) or byawa rning
to ne (4x4 model) and bythest atus symbol
fl ashing in the Instrument Displa y.
Sy stem limits
The sy stem may be impaired or may not function
in thefo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsuf fi‐
cient illumination of thero ad, if there are
highly variable shade conditions or in rain,
sno w,fog or spr ay.
R Glare from oncoming traf fic, direct sunlight or
re flections.
R There is dirt on the windscreen in the vicinity
of the multifunction camera or the camera is
mis ted up, damaged or obscured.
R No or se veral unclear lane markings are pres‐
ent for one lane, e.g. in a construction area.
R Ifth e lane markings are wornaw ay, dark or
co vered up. R
Ifth e dis tance totheve hicle in front is too
short and thus the lane markings cann otbe
de tected.
R The lane markings change quickl y,e.g. lanes
branch off, cross one ano ther or mer ge.
R The car riag ewa y is very nar row and winding.
Ac tivating/deactivating Lane Keeping Assist #
Press theÇ button.
If th e indicator lamp in the button is lit, Lane
Ke eping Assist is activated. If all conditions
ha ve been satisfied, there may be a warning.
If Lane Keeping Assist is activated and you
are driving at speeds abo ve60 km/h and
lane markings are de tected, the lines in the
assis tance displ aymenu of the on-board com‐
puter are shown in green. Lane Keeping
Assist is ready for use.
When the sy stem switches over,th eLane
Keeping Assist on orLane Keeping Assist off
message is shown brief lyin the multifunction
displa y.
% Yo
u can find information on the assis tance
graphic menu under "Assis tance graphic"
(/ page 183).
Setting the sensitivity of Lane Keeping Assist
On-board computer:
4 00E2 5
Settings 5
Assistance
5 Lane Keeping Assist #
Select theStandard orAdaptive setting. Driving and parking
175

In
theStandard setting, no warning vibration
occurs in thefo llowing situations:
R you operate the turn signal in the cor respond‐
ing direction. In this eve nt,thewa rnings are
suppressed for a cer tain period of time.
R a driving saf ety sy stem inter venes or regu‐
lates, such as ABS, BAS or ESP ®
.
In theAdaptive setting,there will also be no
wa rning vibration in thefo llowing situations:
R you accelerate hard, e.g. kickdown.
R you brake hard.
R yousteer actively, e.g. swer vetoavo id an
obs tacle or change lane quickl y.
R you cut the corner on a sharp bend. Tr
ailer operation Note
s on trailer operation &
WARNING Risk of accident and inju ryif
th eto ngue weight is exceeded
The car rier sy stem may de tach from theve hi‐
cle, thereby endangering other road users. #
Always comply with the permissible
to ngue weight when using a car rier. Yo
u can find specifications rega rding the ball
neck on the trailer's identification plate. You can
fi nd specifications rega rding the trailer on the
to wing vehicle's identification plate and in the
Te ch nical Data (/ page 277).
Yo u can attach car rier sy stems such as a bicycle
ra ck or load-bearing implement tothe ball nec k.
When using car rier sy stems on the ball nec k,the
maximum load capacity is 75kg.
If th e trailer coupling is de tachable, it is essential
to comply wi th the operating instructions of the
trailer coupling manufactu rer.
Place your vehicle/trailer combination on sur fa‐
ces that are as even as possible and secu reit
against rolling away ( /page 150). Couple and
uncouple the trailer carefull y. No
tethefo llowing rega rding theto ngue weight:
R Make full use of the maximum tongue weight,
where possible.
R Neverfa ll below a legally prescribed minimum
to ngue weight; theto ngue weight must
alw ays be positive.
R Do not exceed or fall below the permissible
to ngue weights – this must be obser ved dur‐
ing loading and unloading of the trailer.
Do not exceed thefo llowing values:
R Perm itted braked or unbraked towing capa‐
city
The maximum permissible towing capacity for
unbraked trailers is 750kg.
R Perm issible rear axle load of theto wing vehi‐
cle
R Perm issible grossweight of theto wing vehi‐
cle
R Perm issible grossweight of the trailer
R Perm issible gross combination weight
R Maximum permissible speed of the trailer
The releva nt pe rmitted values, which must not be
exc eeded, can be found in thefo llowing places:
R Inyour vehicle documents
R Onthe identification plate of the trailer hitch
R Onthe trailer's identification plate
R Ontheve hicle identification plate
If th ere are discrepancies between theva lues, the
lo west one shall appl y.
Before driving off, ensure thefo llowing:
R The tyre pressure on there ar axle of theto w‐
ing vehicle has been set forth e maximum
load.
R The headlamps ha vebeen set cor rectl y.
Comply with the maximum permissible speed of
80 km/h or 100 km/h, even in countries in
which higher speeds are pe rmitted forve hicle/
trailer combinations.
% During trailer operation,
remember that
PA RKTRONIC is available only toa limited
ex tent, if at all.
% The height of
the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjus table dr aw‐
bar. 176
Driving and pa rking

Ve
hicles with a detachable trailer coupling
Re duce therisk of damage tothe trailer coupling
and cont ribute toenvironmen tal pr otection. If you
do not need the ball nec k, removeit from the ball
neck mount and fit its co ver in there ar bumper
(/ page 177). Only with the co verfitted can the
emission values indicated forre al operation be
achie ved.
% During trailer operation,
the permissible
gross vehicle weight is inc reased by100kg
fo rve hicles regis tere d as passenger vehicles.
The maximum permissible rear axle load
must be obse rved. Fi
tting the co verfo r trailer coupling #
Inse rtthe co verflush into there cess on the
re ar bumper and press it upwards against the
bumper co vering at the latching points on the
outside right and left. #
Turn fast eners from position 0047toposition
0048. #
Ensure that thefast eners are fully engaged
and firm lyin position 0048. At
taching the ball neck &
WARNING Danger of accident‑ and inju ry
due toincor rectly ins talled and secured
ball coupling
If th e ball coupling has not engaged, it can
become de tach ed during driving and endan‐
ge rot her road users. #
Engage the ball coupling as described
and ensure that it is securely ins talled. &
WARNING Danger of accident due to
non-engaged ball coupling
If th e ball coupling has not engaged, the
trailer can become de tach ed. #
Always engage the ball coupling as
described and ensure that it is securely
ins talled. Re
quirements
R Trailer hit chkey #
Notethe number of theke yth at belongs to
th e ball neck of the trailer hitch.
Wi th th is numbe r,yo u will receive a replace‐
ment key at a Mercedes-Benz service centre.
% Depending on
theve hicle equipment, the
holder forth e ball neck on theve hicle can be
pr otected with a co ver in the bumper. #
Release the two quick- re lease fasteners for
th e co ver in the bumper and remo vethe
co ver (/ page177). #
Take the ball neck of the trailer hitch out of
th estow age space on theright-hand side in
th ere ar and stowthe co veraw ay. #
Unlock lock6in handwheel 1with thekey.
Re d mark 3onthe handwheel must be
aligned with green area 2on ball neck 4
(fitting position). #
Ifre d mark 3is not aligned with green area
2, unlock lock 6in handwheel 1with the
key. #
Pull handwheel 1outwards. Turn red mark
3 into green area 2of ball neck 4until
handwheel 1engages. #
Slide ball neck 4vertically into the holder
until it audibly engages.
The ball neck will lock automaticall y.Green
mark 3on handwheel 1is aligned with
green area2on ball neck 4. Driving and parking
17 7

#
Position the trailer on a le vel sur face behind
th eve hicle.
% The height of
the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjus table dr aw‐
bar. #
Couple up the trailer. #
Toinstall an adapt er:open the co ver of the
soc ket. #
Inse rtthe plug with theta b1 into the sock‐
et 's groo ve3 . #
Turn bayonet coupling 2totheright as far
as it will go. #
Let the co ver engage. #
Attach the cable tothe trailer with cable ties
(only in the case of adap ter cable). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. #
Establish all electrical and other connections
to the trailer. In the process, attach the trail‐
er's break away cable totheeye let on the ball
nec k. #
Check that the trailer's lighting sy stem works
properly. #
Indicate in bo thdirections and check whe ther
th e cor responding turn signal light on the
trailer is flashing.
A trailer is de tected only if the electrical con‐
nection is es tablished cor rectly and the light‐
ing sy stem is in working order. The function
of other sy stems also depends on this, e.g.
ESP ®
,PA RKTRONIC, Active Parking Assist,
Blind Spot Assist or Lane Keeping Assist. Even if
the trailer is connected cor rectly, a mes‐
sage may ne vertheless appear on the multifunc‐
tion display in thefo llowing cases:
R LEDs ha vebeen ins talled in the trailer's light‐
ing sy stem.
R The cur rent has fallen below the trailer light‐
ing sy stem's minimum cur rent (50 mA)
% Yo
u can connect accesso ries up toa maxi‐
mum of 240 W tothe permanent po wer sup‐
ply. #
Remo veobjects or devices that pr event the
trailer from rolling, e.g. choc ks. #
Release the trailer's parking brake.
Un coupling a trailer &
WARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
ine rtia-activated brake, your hand may
become trapped between theve hicle and the
trailer dr awbar. #
Do not uncouple trailers with an
engaged overrun brake. *
NO
TEDama gewhen uncoupling in a
st ate of overrun Uncou
pling in a state of overru n can damage
th eve hicle. #
Do not uncouple trailers with an
engaged overrun brake. #
Shift the transmission toposition 005D. #
Apply theve hicle's parking brake. #
Close all the doors. #
Apply the trailer's parking brake. #
Further secure the trailer against rolling away
with a wheel chock or similar object. #
Remo vethe trailer cables and saf etych ains. #
Uncou plethe trailer. Driving and parking
17 9

Note
s onthe instrument clus ter and on-
board co mputer &
WARNING Risk of accident due toan
instrument clus ter malfunction
If th e instrument clus ter has failed or mal‐
functioned, you may not notice restrictions to
saf ety-re leva nt sy stem functions.
The operating saf ety of your vehicle may be
impaired. #
Drive on carefull y. #
Have theve hicle checked immediately
at a qualified specialist workshop. If
yo u are uncer tain rega rding the operational
saf ety of your vehicle, park theve hicle safely as
soon as possible. Inform a qualified specialist
wo rkshop.
The on-board computer will show only messages
and warnings from cer tain sy stems on the dis‐
pla y.Yo u should therefore make sure your vehicle
is operating safely at all times.
Yo u can find an overview of the indicator and
wa rning lamps on the instrument clus ter in "At a
gl ance". Overview of
the instrument clus ter Instrument clus
ter (e xamp le)
1 Speedome ter
2 Multifunction display
3 Rev counter
4 Coolant temp erature display
5 Fuel le vel
Speedome ter
In vehicles with Active Dis tance Assi st
DISTRONIC, there are illuminated segments on
th e speedome ter dial. These segments show
you what speed range is
av ailable:
R Variable limiter activated (/ page159)
The segments light up from thest art of the
scale tothe selected limit speed.
R Active Dis tance Assi stDISTRONIC switched
on (/ page 162)
One or two segments light up in the sa ved
speed range.
R Active Dis tance Assi stDISTRONIC de tects a
ve hicle in front.
The segments light up from the speed of the
ve hicle in front up tothe sa ved speed.
Yo u can show the speed as a digital speedome ter
on the display as well.
If yo uch ange your vehicle's wheel size, check its
assignment tothe wheel size group
(/ page 258). If the assignment changes with‐
out recoding the cont rol units in theve hicle, the
speedome ter will not display the speed accu‐
ra tely. The cur rent vehicle speed may then be
higher than the speed shown bythe speedome‐
te r.Driving and driving sa fety sy stems may then
be operationally impaired or may de tect a mal‐
function and switch themselves off.
In some count ries, an audible signal will sound
and/or a message will appear on the display
when theve hicle reaches the maximum speed
permitted bylaw, e.g. at 120 km/h.
Re v counter
* NO
TEEngine damage due tomaximum
engine speed being exceeded If
th e maximum permissible engine speed is
exc eeded, the engine may be damaged. #
Avoid driving in there d speed range
(danger zone). Outside
temperature display
Yo u should pay special attention toroad condi‐
tions when temp eratures are around freezing
point.
The outside temp erature is displa yed on the mul‐
tifunction display (/ page182).
Changes in the outside temp erature will be dis‐
pla yed af ter a short dela y. 18 0
Instrument clus ter and on-board computer

Coolant
temperature display &
WARNING Risk of burn s when opening
th e bonn et
If yo u open the bonn etwhen the engine has
ove rheated or when there is a fire inthe
engine compartment, thefo llowing situations
may occur:
R You could come into con tact with hot
ga ses.
R You could come into con tact with other
hot, escaping operating fluids. #
Before opening the bonn et, allow the
engine tocool down. #
Intheeve nt of a fire inthe engine com‐
partment, keep the bonn etclosed and
call thefire service. The coolant
temp erature display is located within
th e instrument clus ter's rev counter.
During normal driving and if the coolant le vel is
cor rect, the display is permitted torise to120°C. Overview and operation of
the on-boa rd
compu ter &
WARNING Risk of distraction from infor‐
mation sy stems and communications
equipment
If yo u operate information and communica‐
tion equipment integ rated in theve hicle when
driving, you will be distracted from the tra ffic
situation. This could also cause youto lose
control of theve hicle. #
Only operate this equipment when the
traf fic situation permits. #
Ifyo u cannot be sure of this, stop the
ve hicle whilst paying attention toroad
and traf fic conditions and ope rate the
equipment with theve hicle stationar y. Yo
u must obse rveth e legal requirements forthe
country in whi chyou are cur rently driving when
ope rating the on-board computer. 1
Display
2 Right contro l panel
3 Left control panel
When you swit ch the power supply on, the on-
board computer will be activated.
Ve hicles with manual transmission: if youre mo ve
th eke y,then quickly re-inse rtit and switch the
po we r supp lyon, the on-board computer and the
instrument clus ter will not be activated.
Yo u can control the displa ysand the settings on
th e on-board computer with thesteering wheel
buttons on the left 3and right 2contro l pan‐
els.
Ste ering-wheel but tons Left control panel on
thest eering wheel
00E2 R
Call up the main menu
0064
0063 Press briefly
R Scroll thro ugh lists
R Select menu or function
R IntheRadio orMedia menu, open
th e tra ckorstation list and select
a st ation, audio track or video
scene.
R IntheTelephone menu, switch to
th ete lephone book and select a
name or a telephone numbe r.
0064
0063 Press and hold
R Quickly scroll thro ugh all lists
R IntheRadio orMedia menu, use
ra pid scroll toselect a station,
audio track or video scene.
R IntheTelephone menu with the
te lephone book open, start rapid
scroll. Instrument clus
ter and on-board computer 181