2021 AUDI Q2 Owner´s Manual

Navigation
Adjust route*: Move your finger
over
the MMI
touch padVrotary pushbutton to adjust the route
on the overview map.
Map settings

Applies
to: vehicles with navigation system

•
Press the
|NAV/MAP|
button repeatedly until
the map is displayed.

•
Select: right control button > Map settings.
Depending on the function seLected, you can use
the following settings:
Map colours
day/night: The map is displayed with a
Light/dark

background colour.
automatic: The colour of the map changes to
match the current light conditions (e.g. from day
to night when driving through tunnels).
Map display
Standard: Refer to
opage
219, Fig. 182.
Google Earth*: Refer to
^>page
222, Fig. 183.

Traffic*1);
Refer to
^>page
225, Fig. 187.
Map orientation
destination: The map indicates the destination
and is set to face north.
2D driving position/2D north map: The map de­
picts the vehicle's current position. The map is
set to face the direction of travel or north.
3D driving position*: The current vehicle
posi­

tion is displayed in a three-dimensional map, and
the map is set to face the direction of
travel.
If
the map scale is more than 100 km, the map is

set to
face north.
overview: The entire route from the vehicle
posi­

tion to the final destination or next stopover is
displayed on the map. The map scale varies ac­
cording to the Length of the route and is adapted
automatically. The map is set to face north.
Route information
The display of route information such as the
street you are currently on, upcoming turn-offs,
traffic information or special destinations on the
current route can be switched on/off.
Automatic zoom

on:
The map scale is adjusted automatically ac­
cording to the category of the road you are on
(motorway, major
road,
other road) to ensure

that
you always have the best possible overview
of the route ahead. When there is an upcoming
turn-off, the map display will also be automati­
cally adjusted so that you have a more detailed
view.
intersection: When route guidance is active and
there are upcoming turn-offs, the map dispLay
will temporarily switch to a more detailed scale
so that the road layout can be identified more
easily.
off: The map scale you have set will remain
unal­

tered.

Map content
The dispLay of map content such as weather in­

formation,
traffic information or favourite desti­
nations can be switched on and off.
The weather* is shown on the map if the scale is
set to 5 km or more
^>page
216, Fig. 179.

CO

rN
IV
rN
t-H
o <
x)
This function is not available in the Mexican market.
221

Navigation
Google Earth map
dispLay

Applies
to: vehicles with navigation system and Audi connect

(infotainment)

You
can have the map display satellite images
using the Google Earth map
display.

•• :•-:•

Fig.
183 Example: Google Earth map display

Ï7
--•
•
III
:•:•
in
in

Fig.
184 Example: Google Earth map display with Google

Street
View
Important: The requirements for Audi connect
(infotainment) must be met
^>page
191.

*•
Press the |NAV/MAP| button repeatedly until
the map is displayed.

*•
Select: right control button > Map settings >
Map display
>
Google Earth.
For this map dispLay the system uses data pack­
ets received online in the form of satellite pic­
tures and combines these pictures with the road
network from the Standard map display. The
MMI has 2 GB of flash memory for temporarily
storing the map/navigation data received online
(corresponds to map/navigation data for about
4000 km of route guidance). You can also use the
loaded satellite pictures for route guidance
with­

out an active data connection as long as these
pictures are stored.

Google
Street View
With Google Street View, you can explore many
locations all over the world virtually from the
perspective of
a
pedestrian. Google Street View is
available as soon as the
symbol®
^>Fig.
183 is
shown in crosshairs mode.
To start Google Street View: Turn the rotary
pushbutton to select
a
scale below 30 m.
The following options are available:
-To explore a destination step-by-step: Press
the rotary pushbutton when the
symbol @

^>Fig.
184 is visible.
- To zoom in/out of the current display (up to

4x):
Turn the rotary pushbutton to the left/

right
(D'=>F/g.JS4.

- To navigate in the street view: Move your
fin­

ger in the desired direction on the MMI touch

pad*
or move the rotary pushbutton in the de­
sired direction.
Additional information
In the Map content menu
^>page
221, you can
activate the function to show additional informa­
tion on the infotainment display. To show the ad­
ditional information move the crosshairs onto an
item on the map and press the rotary pushbut­

ton.

(i) Note

- You can delete the data stored by the Goo­
gle Earth map dispLay by selecting Factory
settings
>
Navigation and online memory

•=>
page 256.
- Google Earth is an Audi connect infotain­
ment service that is updated at regular in­
tervals when it is called up. This can take a
few seconds.
-When the Google Earth 3D map display is
switched on, the map display automatically
switches to the 2D map while you are driv­
ing through a tunnel.
- For safety reasons, the Google Street View
functions cannot be used while the vehicle
is moving.
- Please always note the information in the
chapter
^>page
204, General notes on Audi
connect (infotainment).
- Further information can be found on the In­
ternet at www.audi.com.
222

Navigation
Map
update

CO
< o rN
r^
rN
t-H
O
<
Introduction
Applies to: vehicles with navigation system
There are severaL different ways of updating the

map:

- Map updates via the online map update* func­
tion
^
page 223.
- Map updates via the online map update* func­
tion
•=>
page 223
1).

- Importing a map update to your MMI using an
SD card*
1).
Further information can be found
on the Internet at my.audi.com.
- Map update at your Audi dealer, who may
charge for this service.
Online map update
Applies to: vehicles with navigation system and Audi connect
(infotainment)
With the online map update function you can up­
date the map material
of
your navigation system
directly in the vehicle.
New navigation database
-S>
Eastern Europe
An update is available for your destination
region (Eastern Europe).

"\
Updates can also be downloaded from
' my.audi.com and installed via an SD
card.

Switch to online update

Fig.
185 Example: Display of
a
new online map update

^3>

Eastern Europe
—>
Recommended regions

| Belarus
3,3 MB
O

O
j

T

m
Albania 18,2 MB
D

Packets required OB
Start download
Cancel

Fig.
186 Example: Selection of
a
country package
Important:
The requirements for Audi connect infotainment
services must be met
<=>page
191.

x)
This function is not available in the Mexican market.
You must have a myAudi account and have added
your vehicle to it.
The MMI uses the vehicle's position to establish
which regions you are most often in. The MMI
uses this information to suggest update pack­
ages for these regions if any are available

<*Fig.
185.

•
Select and confirm
(T)
Switch to online update

oFig.
185 when the message informing you of
a new map update appears on the infotainment
display. Or:

•
Select:
IMENU|
button > Settings > left control
button > System maintenance > System up­
date > Online update.
A list of the available update packages is shown
on the infotainment display
^>Fig.
186.
Selecting online map update
- Select an update package from the list
(5f).
If
update packages with a large volume of data
are available for certain countries (e.g. France),
you can choose to update individual regions

(e.g.
only southern France).
- Press the
I
BACK
|
button to confirm your selec­
tion and return the list of available update
packages.
Starting download
- Select and confirm Start download.
- Confirm the safety query by selecting Start
download again.
The update packages will be downloaded, and
the download status will be shown on the info­
tainment display.
Installing online map update
The installation of the downloaded maps only oc­
curs after the vehicLe has been parked. The new
update packages are installed after the ignition is
switched off. When you restart the MMI, a mes­
sage indicating
that
the updates have been in­
stalled successfully will appear on the infotain­
ment dispLay.
- Confirm the successful update with OK.
223

Navigation
The
new
maps
can now be
used
for
navigation.
© CAUTION
If
you
cancel
a
map
update download,
the da­

ta already downloaded
is
permanently
de­

leted.
The
appropriate update package can
be

downloaded again
by
selecting
the
]MENU|

button > Settings > left control button
>
Sys­
tem maintenance > System update.
© Note
- Please always note
the
information
in the

chapter
^>page
191,
Audi connect (infotain­

ment).

- Because
of
the high level
of
data usage
when downloading large country update
packages
or the
entire package,
we
recom­
mend that
in
these cases you download
the

data
on
your computer from your myAudi
account, save them
on an
SD card
and
then
import them
to
your
MMI
system. Further
information
can
be found
on the
Internet
at

my.audi.com.
- Please always note
the
information
in the

chapter
^>page
204,
General notes
on
Audi
connect (infotainment).
myAudi special
destinations
Introduction

Applies
to:
vehicles with navigation system
You
can
import your myAudi special destinations
in
two
ways:
- Importing myAudi special destinations
via the

online update*
^page
224.

- Importing myAudi special destinations
to the

MMI using
an SD
card. Further information
can

be found
on the
Internet
at
my.audi.com.
myAudi special destinations (online
update)

Applies
to:
vehicles with navigation system
and
Audi connect

(infotainment)

You
can download your myAudi special destina­
tions from your myAudi account while
in the
ve­
hicle
and
use them
for
route guidance.
Important:
You must have a myAudi account and have stored
myAudi special destinations.
You must have already sent myAudi special desti­
nations from myAudi
to
your vehicle.
This function
is not
available
in the
Mexican
market.

•
Select:
|NAV/MAP|
button > left control button
> Special destinations
>
myAudi special desti­
nations.

•
If
you
have already imported myAudi special
destinations, select
the
right control button
>

Import myAudi special destinations.

•
Log in
with your myAudi user data/myAudi
PIN

if necessary.
The
update sources available will
be listed
on the
infotainment display.

•
Select and confirm Online update.
Selecting myAudi special destinations
to

import
- SeLect
all the
myAudi special destinations
de­

sired from
the
list
((vft.

- Select and confirm Start download.
Starting download
The size
of
the myAudi special destinations selec­
ted
is
shown
on the
infotainment dispLay.
- Confirm
the
download again
by
selecting Start
download.
The myAudi special destinations will
be
downloa­

ded,
and the
download status will
be
shown
on

the infotainment display.
- To finish importing
the new
myAudi special
destinations, confirm
the
update
by
selecting
OK.
•

224

Navigation

CO

â
rN
r^
rN
•-H
•H
00
Activating myAudi
special
destinations in the
map view
The myAudi special destinations must now be ac­
tivated in the map display so that they can be
used for the navigation system.
Traffic information (TMC/TMCpro*)
Applies to: vehicles with navigation system
- Select: |NAV/MAP| button > right control but­
ton > Map settings
>
Map content. The impor­
ted myAudi special destinations are Listed and
can be identified by the list names you assigned
to them.
- SeLect all myAudi special destinations that you
would like to be shown in the map dispLay.
- Press the
I
BACK|
button.
The selected myAudi special destinations are now
displayed in the map view and can be used for
route guidance.
Please always note the information in the
chapter
opage
204, General notes on Audi
connect (infotainment).

Calling
up
traffic

information

Dynamic traffic avoidance
Applies to: vehicles with navigation system
Using the traffic information received via TMC/
TMCproVonline
-
depending on availability - you
can have the MMI guide you past traffic obstruc­
tions whenever possible. For this, the traffic
avoidance must be switched on
^>page
217.

(T) Note

The "Traffic information" function is not avail­
able for the markets of the Gulf Cooperation
Council (GCC) member states or for the Mexi­
can market.

Map:
Traffic messages

*?
A
better route
is
available Time saving: 30 min

Nùrnberg ^
Halle/Leipzig

NUrnberg •*
Halle/Leipzig
A. in
122 km

Nurnberg -•
Halle/Leipzig

Fig.
187 View of traffic messages with better route

*•
Press the |NAV/MAP| button repeatedly until
the map is displayed.

•
Select: left control button
>
Traffic messages.
An overview
of all
the traffic messages will be
shown on the infotainment dispLay
^>Fig.
187.

The traffic messages are sorted according to road

name.
If
there are several traffic messages for
one
road,
an arrow is displayed next to the road
name in the corresponding line
(f)
(•)•
Press the
rotary pushbutton
to
have all the traffic messag­
es for the road displayed.
When route guidance is started, traffic obstruc­
tions relevant for your route are shown in the top
section of the list in order of the distance from
your current location.
If your MMI has calculated a better route for the
current route guidance, a corresponding message
is
shown
(T)<=>F/g.
187. Further information can
be found on
^>page
226.
Displaying traffic information on the map
The following coloured markings indicate the
traffic flow along your planned route:
-
Green:
no obstructions
- Orange: slow-moving traffic
- Red: traffic
jam

Traffic jams or other obstructions are marked
with a coloured warning symbol on the map
when route guidance is active. Hatched markings
show the stretch of road affected by the traffic
obstruction. Traffic obstructions marked with
grey warning symbols are not on your planned

route.
•

225

Navigation
All traffic jams or other obstructions are marked
with a coloured warning symbol on the map
when route guidance is not active.
You can adjust the settings for the display of the
coloured markings, warning symbols etc. in the
Map content menu
^>page
221.
Reception of traffic information is also indicated
by the
[TMc1/|TMCpro|*/|ONLiNE>
symbol in the
status Line of the infotainment display
(f)

OFig.
187.
- Urgent traffic information, such as a car
travelling in the wrong direction on the mo­
torway, is displayed automatically. To hide
the traffic information, press the |BACK|
button or the rotary pushbutton.
- The "Traffic information" function is not
available for the markets of the Gulf Coop­
eration Council (GCC) member states or for
the Mexican market.
Better route
Applies to: vehicles with navigation system

By
receiving traffic information via
TMC,
your
MMI calculates a better route (if
one
is availa­
ble) and any possible time saving for the current
route guidance.
You
can then choose which route
you would like to use.

•
Press the |NAV/MAP| button repeatedly until
the map is displayed.
Important: The route guidance function must be

active.

Dynamic traffic avoidance must be set to manual

•=>poge 217
and the map must be displayed.
If your MMI has calculated a better route
for
the
current route guidance, the message A better
route is
available,
and the time saving will be
displayed on the map. In the map view, the

symbol
^page
219, Fig. 182
draws
your atten­
tion to a better route.
Using a better route
- Press the rotary pushbutton. Or: Select the left
control button
>
Traffic messages. The better
route will be displayed along with your calcula­
ted arrival time.
- SeLect and confirm the better route.
- The better route will be used for the continuing
route guidance.
Online traffic information
Applies to: vehicles with navigation system and Audi connect
(infotainment)

The
MMI system can receive real-time informa­
tion from the Internet regarding traffic conges­
tion, accidents, roadworks and other incidents.
Important: The requirements for Audi connect
(infotainment) must be met
^>page
191.

•
Press the |NAV/MAP| button repeatedly until
the map is displayed.

•
Select: right control button
>
Online traffic da­
ta on (ED.
- To switch on the traffic map display: To have
the traffic information displayed in the best
possible way, select the
I
NAV/MAP]
button >
right control button > Map settings
>
Map dis­
play
>
Traffic.
You can also have the traffic information dis­
played on the Google Earth map
^>page
222 or
the standard map
•=>page
219, Fig. 181.
If online traffic information cannot be received,
the traffic information will automatically be re­
ceived via
|TMC|/|TMCpro|» ^>
page 225.
Prayer
compass*15

Applies to: vehicles with prayer compass
Important: The display must be set to the map
view
<=>page
219.
- SeLect: Left controL button > Mecca. The direc­
tion of prayer in relation to the current vehicle
position will then be shown on the infotain­
ment display.

11
This function is only available
for
the markets of the Gulf
Cooperation Council (GCC) member states.
226

Navigation
- Please always note the information in the
chapter
^>page
204, General notes on Audi
connect (infotainment).
- Every vehicle with active Online traffic data
contributes to specifying and predicting the
traffic situation as precisely as possible. For
this purpose, information on the position of
your vehicle is encrypted and transmitted
anonymously to the traffic data providers at
regular intervals. Should you not wish this
to happen, you can switch off the online
traffic information function at any time.
- The online traffic information network is
not yet available in all countries or areas.
Further information can be found on the In­
ternet at www.audi.com.

CO

rN
r^
rN
•-H

00
Troubleshooting
Applies to: vehicles with navigation system
Subject
Search function: The desired des­
tination cannot be found.
Advice
The destination may not be stored in the navigation database. Or:
Check that you have spelt the search term correctly and that the
desired country has been selected for the search function via the
Country selection option
^>page
213.
227

Radio
Radio
Calling up the radio
menu

The
radio supports the following wavebands:

FM,
AM, DAB* (digital radio).
You
can use the HD
Radio
receiver*
to receive radio stations from the
FM/AM wavebands
digitally.

© Note

„
. Radio: FM/DAB

BS
AKT
^j9

BAYERN 1
-^
The Rock Band - Hymn

"
BAYERN 2
BAYERN 3
'Hf»l)

BR-KLASS
Events
Culture
News
Light

/Z^

O
•^^
•

T^M
:

m

Fig.
188 FM/DAB station list

•
Press the
I
RADIO[
button.
After you call up the radio, the station list that
was last open will be displayed.
To select a station: SeLect
a
station from the sta­
tion List and confirm it.
To set a waveband: Press the
I RADIO |
button re­
peatedly until the desired waveband appears.
The following information is displayed in the FM/

DAB*
station List
<*Fig.
188:
©Waveband
The current waveband of the station is shown in
the FM/DAB* or DAB* station list and in the fa­
vourites list.
(D Radio text (short display)
Programme information for the currently seLec­
ted station is displayed in all station lists when
available.
(D Frozen station name
(FM)1'

Station names with this symbol have been stored
permanently. Refer to
^page
230, Station
names.
- The DAB* waveband is not available in all
countries.
- The DAB* waveband also supports the trans­
mission standards DAB+* and DMB Audio*,
where available.
- The DAB* waveband is not available in the
Mexican market.
- HD Radio is only available in the Mexican
market.
Radio functions
Search function
Applies to: vehicles with search function

You
can enter
search
terms in any order using
the search function.
You
can search in all
wave­

bands by station name or programme type (e.g.

News,).

Radio: search
ANTENNE
ERN

Culture ERN 1
ERN 2

#BAYERN3
Classical

r'M
BAYERN 3

Fig.
189 Entry field and results list for the search function
- To call up the search function: While in a sta­
tion list (e.g. FM station list), turn the rotary
pushbutton to the left until the entry field for
the search function is displayed.
- To use the search function: Refer to

^>page
160, Search function.
You can also search for frequencies2'.
Stations from the favourites
(f)
are displayed in
the results list®
^>Fig.
189. The symbol©
shows which station list you will switch to by se­
lecting a particular station.

V
This function is not available in the Mexican market.

2)
This function is not available for DAB* waveband.
228