2021 AUDI Q2 Owner´s Manual

Intelligent technology

CO

< o rN
iv
rN
t-H
o < 00
event of faults or anomalies in the vehicLe data,
only these data are saved. As a rule, faults are
shown by the warning lamps in the instrument
cluster.
Data saved in the control units can only be read
and analysed with special equipment.
A qualified workshop is only able to recognise
and deal with faults by using the relevant saved

data.
Among other things, the saved data may
contain the following information:
- Data relating to the engine and the gearbox
-Speed
- Direction of travel
- Braking force
- Seat belt warning system data
The control units installed will not under any cir­
cumstances record conversations in the vehicle.
Event data recorder
Your vehicLe is not equipped with an event data
recorder.
In an event data recorder, information about the
vehicle is temporarily saved. In the event of an
accident, you can therefore obtain detaiLed infor­
mation about the course of events. On vehicles
with an airbag system, accident-related data
such as impact speed, seat belt status, seat
posi­

tions and trigger times can be saved. The exact
information saved depends on the manufacturer.
The installation of an event data recorder is sub­
ject to the agreement of the vehicle's owner. This
process is governed by legislation in some coun­

tries.

Reprogramming control units
All data for controlling components are saved in
the control units. Some convenience features,
such as one-touch signalling, single door unlock­
ing and display messages can be reprogrammed
using special workshop equipment. If any
con­

venience features are reprogrammed, the infor­
mation in this Owner's Manual will no longer be
accurate for the features that have been

changed.
We recommend having the reprogram­
ming approved.
Your Audi dealer will be able to provide you with
information about possibLe reprogramming op­

tions.

Event memory
There is a diagnostic connection for reading out
the event memory Located in the
footweLL
on the
driver's side of the vehicle. Information regard­
ing the operation and status of the vehicle's elec­
tronic control units is stored in the event memo­
ry. The event memory should only be read out
and erased by
a
qualified workshop.
A WARNING
The diagnostic connection must not be used
for other purposes. Incorrect use can cause
malfunctions - risk of accident!
151

Multi
Media Interface

Multi
Media Interface
Notes on traffic safety
You should only use certain infotainment system
functions, e.g.
entera
navigation destination,
while the vehicle is stationary. Always be pre­
pared to stop operating the infotainment system
in the interest of your own safety and that of
oth­

er road users.
A WARNING
Only operate the infotainment system when
the traffic conditions allow you to do so safely
and when you can maintain proper control of
your vehicLe - risk of accident!

(T)
Note
Certain functions are not available while the
vehicle is in motion.
Introduction
The Multi Media Interface (MMI) combines
dif­

ferent communication, navigation* and
enter­

tainment systems in your Audi. You can operate
your MMI system via the MMI control console,
the multi-function steering wheel or the speech
dialogue system*.

d>^3
ZLMH®

Fig.
140 MMI control console
Overview of MMI control console

(T)
Rotary pushbutton with joystick

function*
153,
157
© MMI touch
pad*
155
(D
Left controL button 154

0
Right control button 154
(D Buttons for calling up menus di­
rectly 154
(6)
IMENU1
button
(7)
IBACKI
button
154
153
MMI ON/OFF button
with joystick function
How to use

Fig.
141 MMI ON/OFF button with joystick function
Switching MMI on/off: The MMI can be switched
on/off manually.
-To switch on manually: Briefly press the ON/
OFF
button
(D^F/g.
141.
Or. Press the
[MENU]

button (6)
^>page
152, Fig. 140 or one of the
buttons for calling up menus directly (J).
- To switch off manually: Press and hold the ON/
OFF
button
®^>F/g.
141 until the MMI
switches off. The MMI system will not be
switched on automatically when the ignition is
switched on if it was turned off manually the
last time it was operated.
Other functions:
- To adjust the volume: Turn the ON/OFF button

Ql^Fig.
141.
- Mute: Briefly press the ON/OFF button
(Î)

*Fig.
141.
- To select the previous/next function (e.g. ra­
dio station/track): Briefly press the ON/OFF
button
(i)t>Fig.
141 to the left KM or right
WH.

-To rewind/fast forward (e.g. track): Press and
hold the ON/OFF button
(T)^Fig.
141 to the

left KM
or right»!.
A WARNING
The audio system volume should be set at a
level which enables you to hear external
sig­

nals (such as the sirens of police and
152

Multi Media Interface
emergency vehicles) clearly - failure to do so
could result in an accident.

CO

<
o
rN
iv
rN
t-H
o
< 00

©
Note
If the engine is switched off and the vehicle
battery charge level is low, the MMI system
will be switched off automatically.
Infotainment display
Switching on/off
- To switch on/off manually: Press the
^
but­
ton
@ tapage
10, Fig. 2.
You can operate certain functions using the MMI
ON/OFF button with joystick function when the
MMI is switched on but the display is switched
off
o
page 152.
Notes on the illustrations of the displays

The
display type depends on the equipment
fit­

ted in your vehicle.
87.6 MHz

88./
MHz
90.0 MHz
96.6 MHz

Fig.
142 Display
type
A
87.6 MHz
88.7 MHz

ij
90.0 MHz

r
90.5 MHz
91.5 MHz
96.6 MHz

1

©^

1

FM

L 1

3
i
i

Fig.
143 Display type B
Additional content (e.g. album covers, maps)
may be shown on display type
B®
oF/'g.
143. As
the other content is almost identical for both dis­
play types, the illustrations in this Owner's
Man­

ual primarily show display type A, depending on
the topic.
How to use the MMI
Selecting and confirming a function
87.6 MHz
88.7 MHz
90.0 MHz
90.5 MHz
91.5 MHz
96.6 MHz

Fig.
144 How to use the rotary pushbutton
Selecting and confirming a function in a
menu/list
• To select a function: Turn the rotary pushbut­
ton®
^>Fig.
144 to the desired function (e.g.
setting a frequency).

•
To confirm the selection: Press the rotary
pushbutton
(T)
OFig.
144.
Returning to the previous function level

•
Press the
I
BACK
|
button
® *>page
152,
Fig. 140.
Calling up the main menu/menu

^w
J
x,.
•'.w
•^£j: •

V."

.
F

Fig.
145
Illustrât

E/Car

(TM
Sound

^%
\
* VlKadiol •
*
M
J
Q
Mfedia

II
Telephone

on:
Main menu
• •

.

153

Multi Media Interface
Calling up the main menu

•
Press the button marked
[MENU
|(g)
tapage
152, Fig. 140. The MMI menus (e.g. Ra­
dio) will be displayed
of/g.
145. You can then
use the rotary pushbutton to select and
con­

firm a function.
Calling up a menu directly

•
Press the corresponding button to call up me­
nus
directly (§) ^>page
152, Fig. 140 in the di­
rection of the menu you require (e.g.
I
RADIO
|),

You can then use the rotary pushbutton to se­
lect and confirm a function.
Options menu: You can use the options menu to
select and confirm specific functions for individu­
al menu items (e.g. Radio) and to make changes
to settings.
Important: The symbol for the options menu
L±|

must be shown on the infotainment display

^>Fig.
146. You can then use the rotary pushbut­
ton to select and confirm a function.
To call up/close the options menu: Press the
right control button
^>Fig.
146. You can then use
the rotary pushbutton to select and confirm a

function.

Calling up the selection/options menu with
the control buttons
90.5 MHz

91.5
MHz
96.6 MHz
r

Fig.
146 Control buttons on MMI control console
Selection menu: You can use the selection menu
to call up further functions for individual menu
items (e.g. Radio).
Important: The symbol for the selection menu
must be shown on the infotainment display

ï>Fig.
146.
To call up/close the selection menu: Press the
left control button
^>Fig.
146. You can then use
the rotary pushbutton to select and confirm a

function.

Notes on path descriptions

The
path descriptions in this manual
show
you at
a glance how to call up the menu you require
along with its settings and functions.
Example of a path description

•
Select:
I
RADIO|
button > left control button >

FM.

Using a path description
• Press the
I
RADIO
I
button.

•
Press the left control button.

•
Turn the rotary pushbutton to FM in the menu.

•
Press the rotary pushbutton to confirm FM.

•
The function you have selected and confirmed
is now set. In this example, the FM waveband is

selected.

154

Multi Media Interface
MMI touch
MMI touch pad
Applies to: vehicles with MMI touch

You
can enter data on the MMI touch pad with
the help of handwriting recognition.

(•/-wrmgolstadt,
Mùhlhausen,
85049

(•)
(D)
Miinchsmiinster,
85126

® (D)
Petershausen,
Muhldorf, 85238

Fig.
147 Entering a navigation destination via the MMI
touch pad
The MMI touch pad is located between the
con­

troL buttons
^>Fig.
147.
Entering letters, numbers and characters
Applies to: vehicles with MMI touch

The
MMI touch pad enables information to be
entered with the help of handwriting recogni­
tion.
Important: A function requiring text or number
input must be active and the
symbol (T)

oF/g.
148 must be shown on the display.
- Basic principle: Use your finger to write an
indi­

vidual letter (capital or small letters) or num­
bers/symbols on the MMI touch pad. If the sys­
tem positively identifies a character, it will be
shown on the infotainment display
(Î)
^>page
155, Fig. 147 and may be confirmed
acoustically. It will then be shown in the entry

field.

- To enter a space: Move your finger from left to
right across the MMI touch pad.
- To delete a character: Move your finger from
right to left across the MMI touch pad.
- To use the suggestion: Press the rotary push­

button.

- To switch directly to the results list: Turn the
rotary pushbutton to the right.
- To enter Cyrillic characters: Press the right
con­

trol button. Select and confirm Switch to Cyril­
lic characters.
- To open the speller: Select the right control
button > Open speller. Text and numbers can
be entered via the speller
^>page
159.
Telephone: call list

K%
Who would you like to call?
•
e.g
"John Smith"

^
Mailbox

B"
Smith, John
•"i 0049841123456

CO
<
O rN IV rN
i-H

00

Fig.
148 Display when MMI touch is active
155

Multi Media Interface
Moving the crosshairs
Applies to: vehicles with MMI touch
Moving the map
Applies to: vehicles with MMI touch

Strausberg
Potsdam-UJ3
/
101
9l

kenfelde-Mahlow
Fiirstenw

Fig.
149 Moving the crosshairs
Important: A map must be displayed

•=>
page 219.
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton to bring up the crosshairs
(Î)

*>Fig.
149. Or: Press the MMI touch pad. To
hide the crosshairs, press the
JBACK|
button
(J)
^>page
152, Fig. 140.
- To move the crosshairs on the map: Move your
finger in the desired direction on the MMI
touch pad while the crosshairs are displayed

^Fig.
149.
To move the crosshairs quickly: Move your finger
quickly in the desired direction on the MMI touch
pad while the crosshairs are displayed
(Î)

^Fig.
149. The crosshairs will only stop moving
again after
a
few seconds.
Briesela Strausberg

avel
PotsHam-na

Furstenw
Blankenfe Ide-Mahlow

L
•J

Fig.
150 Moving the map
Important: A map must be displayed

•=>
page 219.
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton to bring up the crosshairs
(T)

•=>F/g.
150. To hide the crosshairs, press the
|BACK| button
® ^>page
152, Fig. 140.
- To move the standard map/Google Earth map:
Move two fingers in the desired direction on the
MMI touch pad while the crosshairs are dis­
played
^>Fig.
150.
- To move the map: Move two fingers in the de­
sired direction on the MMI touch pad while the
crosshairs are displayed
^>Fig.
150.
- To move the map quickly: Move two fingers in
the desired direction on the MMI touch pad
quickly while the crosshairs are displayed. The
map will only stop moving again after
a
few
seconds.
156

Multi Media Interface
Zooming in/out on map

Applies
to: vehicles with MMI touch

CO

rN
IV
rN
•-i

00

Fig.
151 Zooming in/out on the map
Important: A map must be displayed

^>page
219.
- To zoom in/out on the map: Press the rotary
pushbutton to bring up the crosshairs. Place
two fingers on the MMI touch pad and move
them apart/together
^>Fig.
151.
To hide the crosshairs, press the
I
BACK] button

Q)*>pagel52,
Fig. 140.
Adjusting the sound focus

Applies
to: vehicles with MMI touch
Important: The
Balance/fader*
option must be
selected
•=>page
260.
- To move the crosshairs of the sound focus:
Move your finger in the desired direction on the
MMI touch pad.
-
To
store the location of the crosshairs: Press
the rotary pushbutton twice. Or: Press the

I
BACK|
button
® t>page
152, Fig. 140.
Operating the DVD main menu

Applies
to: vehicles with MMI touch
Important: A video DVD must be playing

o
page 243.
- To select a menu option: Move your finger up/
down
or to
the
Left/right
on the MMI touch

pad.

- To confirm your selection: Press the rotary
pushbutton.

\J
Note
-You can set the volume of the MMI touch
spoken cues according to your own prefer­
ences
^>
page 262.
- Please note the direction of writing if the
menu language is set to Arabic.
Rotary pushbutton with
joystick function
Using

Applies
to: vehicles with joystick function

Fig.
152

function

m[

How
to

#
#

use
the rotary pushbuttc

in
m
op
i <
cc

0

n
with joystick
You can push the rotary pushbutton up/down
(T)

^>Fig.
152
or
to the
Left/right©.

Calling up the entertainment drawer

Applies
to: vehicles with MMI touch
To call up the entertainment drawer: Press the
rotary pushbutton downwards to open the enter­
tainment drawer®
^>page
161, Fig. 156. You
can then select and confirm a function.
To close the entertainment drawer: Press the ro­
tary pushbutton upwards to close the entertain­
ment drawer. Or: Press the |BACK| button
@

opage
152, Fig. 140.
Further functions

Applies
to: vehicles with joystick function
Displaying the entry field/switching to the
speller
Push the rotary pushbutton upwards
^>page
157,
Fig. 152 to access the entry field or the begin­
ning of
a
list in the central area. If the entry field •
157

Multi Media Interface
is already open, you can switch directly to entry
via the speller by pushing the rotary pushbutton
upwards again
opage
159.
On the map
Important: A map must be displayed

^>page
219.
- To display the entry
field:
Push the rotary
pushbutton upwards.
- To display the route: If route guidance is ac­

tive,
you can have the route displayed by push­
ing the rotary pushbutton upwards

^>page
213, Fig. 176.
- To zoom in/out of the map: Turn the rotary
pushbutton to the
left/right
to make the map
scale larger or smaller.
- Further options for the map: Refer to

•=>
page 220.

Applies
to: vehicles without MMI touch with joystick function
- To bring up/hide the crosshairs: Press the ro­
tary pushbutton. The crosshairs will appear on
the map. To hide the crosshairs, press the

I
BACK| button.
- To move the crosshairs: With the crosshairs

displayed,
turn the rotary pushbutton in the di­
rection you would like to move the crosshairs.
Press and hold the rotary pushbutton until the
crosshairs are at the desired position on the

map.

Adjusting the sound focus

Applies
to: vehicles without MMI touch with joystick function
Important: The balance/fader option must be se­
lected
^>
page 260.
- To adjust the sound focus using the cross­

hairs:
The crosshairs can be moved horizontal­
ly. Turn the rotary pushbutton to the left or
right. To move the crosshairs vertically, press
the rotary pushbutton. Turn the rotary push­
button to the left or right. Press the rotary
pushbutton again to save the setting.
Operating the DVD main menu
Important: A video DVD must be playing

^>page
243.
- To select a menu option: Move the rotary push­
button with joystick function up or down, or to
the
Left
or right.
- To confirm your selection: Press the rotary
pushbutton.
Calling up the selection/options menu with
the rotary pushbutton

Applies
to: vehicles with joystick function
90.5 MHz
91.5 MHz
96.6 MHz

Applies
to: MMI control console with rotary pushbutton and

joystick
function

Fig.
153 Calling up the selection/options menu with the

rotary
pushbutton
Important: The symbol for the selection menu
must be shown on the infotainment display

*Fig.
153.
To call up/close the selection menu: Press the
rotary pushbutton to the Left
^Fig.
153
to call
up the selection menu. You can then use the ro­
tary pushbutton to select and confirm a function.
Press the |BACK| button
© ^>page
152, Fig. 140
to return to the previous function.
To call up/close the options menu: Press the ro­
tary pushbutton to the right
^>Fig.
153 to call up
the options menu. You can then use the rotary
pushbutton to select and confirm a function.
158