Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
*NOTEBe careful nottodamagethe seatbeltforthe center seat when installingthechildrestraint system
#Make surethatthe seat belt is not trap‐ped.
#Vehicles withrecliningrear seats:Movetherecliningrear seat backrest down slightlybeforetheLATCH-type (ISOFIX)childrestraint system is installed.
#Removethe upholstered lining1.
#Vehicles withoutrecliningrear seats:Foldupholstered lining1upwards.
#Turnthe support ontherear side of uphol‐stered lining1by90°.The upholstered lining1willremainfoldedupwards.
#AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting brackets2inthevehicle.
#Vehicles withrecliningrear seats:Returntherecliningrear seat backresttoan uprightposition.Therecliningrear seat backrest mustrestagainstthechildrestraint system.
SecuringTopTether
&WARNINGRisk of injuryor death whenadjustingthe seat after installing achildrestraint system
Vehicles with electrically adjustablerearseats:
Ifyou adjustthe seat after installing achildrestraint system,thefollowing may occur:
Rthe seat belt may either sittoo loose ortoo tight
Rthechildrestraint system can becomeloose, incorrectly positioned or damaged
As aresult,thechildrestraint system maynot be abletoprovidethe intended level ofprotection.
#Never adjustthe seat after installingthechildrestraint system.
Ifthechildrestraint system is equippedwith aTopTether belt:
Therisk of injury can bereducedbyTo pTether. TheTopTether beltfacilitates an
Occupant safety55
additional connection betweenthechildrestraint system attached withLATCH-type (ISOFIX) andthevehicle.
#If necessary,moveheadrestraint1upwards (→page107).
#Fold up cover2ofTopTether anchorage3.
#InstalltheLATCH-type (ISOFIX)childrestraintsystem withTopTether. Always comply withthechildrestraint system manufacturer'sinstallation instructions when doing so.
#GuideTopTether belt4under headrestraint1betweenthe two headrestraintbars.
#HookTopTether hook5ofTopTether belt4without twisting intoTopTether anchor‐age3.
#TensionTopTether belt4. Always complywiththechildrestraint system manufactur‐er's installation instructions when doing so.
#Fold down cover2ofTopTether anchorage3.
#If necessary,slide headrestraint1down‐wards (→page107). Make surethatyou donot interferewiththe correctrouting ofTo pTether belt4.
Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhen using a category Iforward-facingchildrestraint system:removethe head
56Occupant safety