2019 HONDA ACCORD HYBRID Owners Manual

Continued
327uu Audio System Basic Operation u HondaLink ® Service *
Features
Your subscribed telematics service prov ider can track your vehicle’s location,
remotely lock or unlock doors, and help you find your vehicle.
To use these features, you n eed your user ID and person al identification number
(PIN).
■ Stolen vehicle tracking
This feature searches and tracks down your ve hicle position even if it is on the move.
If you believe that your vehicle has been stolen, contact the police as well as the
provider.
■ Remote door lock/unlock
The provider can remotely lock or unlock doors upon your request.
■ Vehicle finder
This feature is convenient to use when trying to locate your vehicle in large areas,
such as a crowded parking lot. If you cannot locate your vehicle after using the
remote transmitter’s answerback function, you can contact the provider which can
then flash your vehicle’s exterior lights and sound the horn, and sends vehicle
location via web/Smartphone.
■ Security ala rm notification
If the security system in your vehicl e detects an abnormal condition, such as
someone tampering with the lock on your vehicle, the prov ider notifies you by email.■ Security Features 1 Security Features
The contact information of your provider, your user
ID and PIN will be given when you subscribe to
HondaLink ® . If you forget any of the above, contact a
Honda dealer, or go to hondalink.honda.com .
You can also activate the remote door lock/unlock
and vehicle finder features from the Internet or using
your smartphone app. As k a dealer, or visit
hondalink.honda.com .
1 Vehicle finder
The lights will stop flas hing and horn will stop
sounding under the following:
• When conditions 30 seconds have elapsed.
• You unlock the doors using the remote transmitter.
• You unlock the doors using the smart entry system.
• You unlock the doors us ing the built-in key.
• The power mode is set to ACCESSORY or ON.

uu Audio System Basic Operation u HondaLink ® Service *
328
Features Connect to the HondaLink ® operator when trying to find a destination or for
roadside assistance.
1. Press the LINK button.
u Connection to the operator begins.
2. Talk to the operator.
u To disconnect, select Hang Up on the
audio/information screen or press the
button on the steering wheel.■ Operator Assistance 1 Operator Assistance
Remain attentive to road conditions and driving
during operator assistance.
If you want to add or re new a subscription, call the
Operator Assistance.
1. Press the button.
2. Select HondaLink .
3. Select HondaLink Subscription Status .LINK
Button
Audio/information screen
when connected to the
HondaLink ® operator.

329uu Audio System Basic Operation u HondaLink ® Service *
Features
Your subscribed telematics service provid er can check your vehicle’s condition.
■ Virtual Dashboard
You can remotely check the mileage, fu el range, and oil life in your app.
■ Remote Start and stop the engine
You can remotely start and stop engine usin g your app as same as the smart entry
key.
■ Geofence Alert
You can receive a notification anytime your ve hicle enters or leaves a region set by
you.
■ Speed Alert
You can receive a notification when your ve hicle has exceeded a speed limit set by
you.
■ Personal Data Wipe
You can reset your audio and navigation system settings to factory defaults with the
app.
■ Wi-Fi hotspot
Vehicle provides 4G LTE ne twork environment as Wi-Fi router to use tablet or
smartphone in your vehicle.■ Convenient Features 1 Convenient Features
The contact information of your provider, your user
ID and PIN will be given when you subscribe to
HondaLink ® . If you forget any of the above, contact a
Honda dealer, or go to hondalink.honda.com .

330 uu Audio System Basic Operation u Wi-Fi Connection
Features Wi-Fi Connection You can connect the audio system to the Internet using Wi-Fi on the audio/
information screen. If your phone has wire less hotspot capabilities, the system can
be tethered to the phone. Use the following steps to setup.
1. Press the button.
2. Select Settings .
3. Select Connections .
4. Select Wi-Fi .
5. Select Change Mode .
6. Select Network or Hotspot , then
Confirm .
u To change the Wi-Fi settings, select
Network Options or HotSpot
Options .
u Select the access point you want to
connect to the system.
7. Select Connect .
u Enter a password for the access point,
and select Done .
u When the connection is successful, the
icon is displayed on the list.
8. Press the button to go back to the
home screen.■ Wi-Fi mode (setting for the first time) 1 Wi-Fi Connection
Wi-Fi and Wi-Fi Direct a registered trademark of Wi-Fi
Alliance ® .
1 Wi-Fi mode (setting for the first time)
You cannot go through the setting procedure while a
vehicle is moving. Park in a safe place to set the audio
system in Wi-Fi mode.
Some cell phone carriers charge for tethering and
smartphone data use. Check your phone’s data
subscription package.
Check your phone manual to find out if the phone
has Wi-Fi connectivity.
You can confirm whether Wi -Fi connection is on or
off with the icon on the Wi-Fi network list.
Transmission speed and others will not be displayed
on this screen.
In case of Wi-Fi connect ion with your phone, make
sure your phone’s Wi-Fi se tting is in access point
(tethering) mode.

331uu Audio System Basic Operation u Wi-Fi Connection
Features
Make sure your phone’s Wi-Fi setting is in access point (tethering) mode.
■ Wi-Fi mode (after the init ial setting has been made) 1 Wi-Fi mode (after the initial setting has been made)
You may need to go through an initial setup for Wi-Fi
connection again afte r you boot your phone.iPhone users

332 uu Audio System Basic Operation u Near Field Communication (NFC) *
Features Near Field Comm unication (NFC) *Near Field Communication (NFC) allows you to connect your phone to the audio
system easily via Bluetooth ® .
NFC enables two devices to communicate in close proximity, within about 0.6 inch
(15 mm).
The following features are available:
• Bluetooth ® setup
• Image transfer for wallpaper
1. Press the button.
2. Select Settings .
3. Select Connections .
4. Select NFC , then ON .
5. Select Android Beam , then ON .■ NFC Setup 1 Near Field Communication (NFC) *
To use the NFC function, your Android phone first
must be NFC compatible.
Check with the manual that came with your Android
phone to find out if your phone is NFC compatible.
The N-Mark is a trademark or registered trademark of
NFC Forum, Inc. in the United States and in other
countries.Android phone only
* Not available on all models

Continued
333uu Audio System Basic Operation u Near Field Communication (NFC) *
Features
1. Press the button then select NFC
Manager . Or touch the NFC logo near the
glove box with the NFC tag of your phone.
u The NFC Manager screen is displayed.
2. Select Connect Device to Vehicle
Bluetooth .
3. Touch the NFC logo near the glove box with
the NFC tag of your phone.
4. A notification appears on the screen if
pairing is successful.
u Confirm if the pairing code on the screen
and your phone match.
This may vary by phone.■ Bluetooth ® Setup 1 Bluetooth ® Setup
To use the NFC function, you first need to set up your
Android phone to enable this function.
For instructions on how to use NFC with your
Android phone, refer to the manual that came with
your phone.

uu Audio System Basic Operation u Near Field Communication (NFC) *
334
Features 1. Press the button.
2. Select NFC Manager or touch the NFC
logo near the glove box with the NFC tag of
your phone.
3. Select Transfer Image .
4. Open the photo you want to transfer on
your phone, then select Next .
5. Touch the NFC logo near the glove box with
the NFC tag of your phone.
6. Select the photo on your phone.
7. A confirmation message appears on the
screen. Select Wallpaper .■ Image Transfer for the Wallpaper 1 Image Transfer for the Wallpaper
The wallpaper you set up on Clock Faces cannot be
displayed on the driver information interface.
• The file name must be fewer than 255 characters.
• The file format of the im age that can be imported
is BMP (bmp) or JPEG (jpg).
• If the USB flash drive doe s not have any pictures,
the No files detected message appears.
• Up to five pictur es can be imported.
• The maximum image size is 1,920 × 936 pixels. If
the image size is less the image is displayed in the
middle of the screen with the extra area appearing
in black.