2019 HONDA ACCORD HYBRID clutch

27
Quick Reference Guide
Maintenance (P 603)
Under the Hood (P 614)
● Check engine oil, engine coolant, and windshield washer
fluid. Add when necessary.
● Check brake fluid and clutch *
fluid.
● Check the battery condition monthly.
a Pull the hood release handle under the corner of the
dashboard.
b Locate the hood latch lever, push it to the side, and then
raise the hood. Once you have raised the hood slightly, you
can release the lever.
c When finished, close the hood and make sure it is firmly
locked in place. Lights (P 631)
● Inspect all lights regularly.Wiper Blades (P 639)
● Replace blades if they leave streaks
across the windshield.
Tires (P 642)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter
driving.
* Not available on all models

115uu Indicators u Driver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
Message Condition Explanation●
Appears if the remote battery is too weak to start the
engine or the key is not within operating range to
start the engine.
A beeper sounds six times. ●
Bring the remote in front of the ENGINE START/STOP
button to be touched with. 2 If the Remote Battery is Weak P. 672●
Appears when the starter system has a problem. ●
As a temporary measure, press and hold the ENGINE
START/STOP button for up to 15 seconds while
pressing the brake pedal and clutch pedal (manual
transmission only), manual ly start the engine.
Have your vehicle checked by a dealer.
●
Appears as soon as a problem is detected in the
smart entry system *
or push button starting system. ●
Have your vehicle checked by a dealer.U.S.
Canada
* Not available on all models

132 uu Indicators u Driver Information Interface Wa rning and Information Messages
Instrument Panel Message Condition Explanation●
Appears if ACC with LSF is canceled while your
vehicle is automatically stopped by ACC with LSF. ●
Immediately depress the brake pedal.
Message Condition Explanation●
Appears when pressing the SET / – button while the
vehicle is moving and the clutch pedal is depressed. ●
ACC cannot be set. 2 Adaptive Cruise Control (ACC) *
P. 535●
Appears when the clutch pedal is depressed while
ACC is in operation. ●
ACC has been automatically canceled. 2 Adaptive Cruise Control (ACC) *
P. 535Models with ACC with LSF
Manual transmission models
* Not available on all models

190
Controls Operating the Switches Around the Steering WheelENGINE START/STOP Button
*1 : Manual transmission models
*2 : Continuously variable transmi ssion models for Canadian models
*3 : U.S. models
*4 : Automatic transmission models■ Changing the Power Mode 1 ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine wh en the remote is inside
the vehicle.
If the battery of the remote is getting low, the engine
may not start when you push the ENGINE START/
STOP button. If the engine do es not start, refer to
the following link.
2 If the Remote Battery is Weak P. 672
The engine may also run if the remote is close to the
door or window, even if it is outside the vehicle.
ON mode:
The ENGINE START/STOP button is red when the
engine is running. Operating RangeContinuously Variable Transmission Automatic/Manual Transmission
VEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked *1*2
.
The power to all electrical
components is turned off.
Press the button without the
transmission in ( P
.
Put the transmission into ( P

then press the button. Press the button. Without pressing the
clutch *1
or brake *4
pedalWithout pressing
the brake pedal ACCESSORY
The button blinks (in red).
Operate the audio system and
other accessories in this position.
ON
The button blinks (in red).
All electrical components can be
used.
Put the transmission into ( P *3
.*3

uu Towing a Trailer u Towing Your Vehicle
464
Driving 1. Remove the 20 A FR ACC SOCKET and 10 A
ACC fuses. These fuses are located in the
interior fuse box. 2 Interior Fuse Box P. 690
2. Remove the 10 A BACK UP fuse. This fuse is
located in the engine compartment fuse
box. 2 Engine Compartment Fuse Box P. 688
3. Store the fuses in a safe place so you do not
lose them.
u Make sure to reinstall the fuses before
you start driving your vehicle.
4. Push the ENGINE START/STOP button
without depressing the clutch pedal.
u The ENGINE START/STOP button
blinks.
5. Touch the center of the ENGINE START/
STOP button with the H logo on the
remote while the ENGINE START/STOP
button is blinking.
u The ENGINE START/STOP button stop
blinking, then stays on.
6. Put the transmission into neutral.
7. Push the ENGINE START/STOP button
once without depressing the clutch pedal.
u Make sure the steering wheel does not
lock. 






 
 
  

 


Engine Compartment Fuse Box Interior Fuse Box
10 A BACK UP
fuse10 A ACC fuse 20 A FR ACC
SOCKET fuse 1 Towing Your Vehicle
Make sure to reinstall the fuses before you start
driving your vehicle.

Continued
467uu When Driving u Starting the Engine
Driving
1. Make sure the parkin g brake is applied.
u The parking brake indicator (red) comes
on for 30 seconds when you pull up the
electric parking brake switch.
u The parking brake must be applied to
start the engine.
2. Check that the transmission is in neutral.
Then depress the brake pedal with your
right foot, and the clutch pedal with your
left foot.
u The clutch pedal must be fully depressed
to start the engine.
3. Press the ENGINE START/STOP button
without depressing the accelerator pedal. 1 Starting the Engine
If the vehicle stalls on a slope, the electric parking
brake system may automatica lly engage. If it does
not, engage it manually, th en start the engine again.Manual transmission models
Manual transmission models
Electric Parking Brake Switch
Brake PedalClutch Pedal

468 uu When Driving u Starting the Engine
Driving You can turn the engine off when the vehicle is completely stopped.
1. Put the transmission into ( P
.
2. Press the ENGINE START/STOP button.
• If the transmission is in neutral, press the ENGINE START/STOP button.
• If the transmission is in any gear other than neutral, depress the clutch pedal, then
press the ENGINE START/STOP button.■ Stopping the Engine Automatic transmission/Continuousl y variable transmission models
Manual transmission models

uu When Driving u Starting the Engine
472
Driving 1. While depressing the brake pedal, press the ENGINE START/STOP button.
2. Keeping your right foot on the brake pedal, put the transmission into ( D
. Select
( R
when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the parking brake indicator (red) goes off.
■ Hill start assist system
Hill start assist keeps the brake engaged br iefly to help prevent the vehicle from
rolling on inclines as you move your fo ot from the brake pedal to the accelerator.
Put the transmission into ( D
, ( S *
or ( L *
when facing uphill, or ( R
when facing
downhill, then release the brake pedal.
Depress the clutch pedal, a nd put the transmission into ( 1
when facing uphill, or ( R

when facing downhill, then release the brake pedal.■ Starting to Drive Automatic transmission/Continuousl y variable transmission models
1 Starting to Drive
The engine stops when th e transmission is taken out
of ( P
before the ENGINE START/STOP button is
pressed. Follow the step 1 when starting to drive.
You can also release the parking brake by pressing
the electric parking brake sw itch while depressing the
brake pedal.
When facing downhill, you can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal. When the engine was started using the button on the
remote
When the engine was started using the button on the remote
When the engine was started in any case
1 Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very st eep or slippe ry slope, and
does not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
Hill start assist will operate even when VSA ® is
switched off.Automatic transmission/Continuousl y variable transmission models
Manual transmission models
* Not available on all models