2019 HONDA ACCORD HYBRID Owners Manual

247uu Audio System u Audio System Theft Protection
Features
Audio System Theft Protection The audio system is disabled when it is disconnected from the power source, such as
when the battery is disconnected or goes dead. In certain conditions, the system
may display a code entry screen. If this occurs, reactivate the audio system.
■ Reactivating the audio system
1. Set the power mode to ON.
2. Turn on the audio system.
3. Press and hold the audio system powe r knob for more than two seconds.
u The audio system is reac tivated when the audio co ntrol unit establishes a
connection with the vehicle control unit. If the contro l unit fails to recognize
the audio unit, you must go to a dealer and have the audio unit checked.

248 uu Audio System u Audio Remote Controls
Features Audio Remote Controls Allow you to operate the a udio system while driving.
SOURCE Button
Cycles through the audio modes as follows:
FM1  FM2  AM  USB/iPod 
Pandora ®  Bluetooth ® Audio
VOL ( +
/VOL ( -
(Volume) Buttons
Press VOL ( +
: To increase the volume.
Press VOL ( -
: To decrease the volume.
/ (Seek/Skip) Buttons
• When listening to the radio
Press : To select the next preset radio station.
Press : To select the previous preset radio station.
Press and hold : To select the next strong station.
Press and hold : To select the previous strong station.
• When listening to an iPod, USB flash drive, or Bluetooth ® Audio
Press : To skip to the next song.
Press : To go back to the beginning of the current or previous song.
• When listening to a USB flash drive
Press and hold : To skip to the next folder.
Press and hold : To go back to the previous folder. 1 Audio Remote Controls
Some modes appear only when an appropriate
device or medium is used.
Depending on the Bluetooth ® device you connect,
some functions ma y not be operated.
Press the (Hang-up/back ) button to go back to
the previous command or cancel a command. Models with color audioModels with color audio
/
(Seek/Skip)
Buttons
SOURCE
Button
VOL ( +
/ VOL ( -
(Volume) Buttons (Hang-up/back) Button

Continued
249uu Audio System u Audio Remote Controls
Features
Allow you to operate the audio system whil e driving. The information is shown on
the driver information inte rface or head-up display *
.
VOL ( +
/VOL ( -
(Volume) Buttons
Press VOL ( +
: To increase the volume.
Press VOL ( -
: To decrease the volume.
Left Selector Wheel
• When selecting the audio mode
Press the (home) button, then roll up or down to select Audio on the driver
information interface, and then press the left selector wheel. 1 Audio Remote Controls
Press the (back) button for the driver
information interface to go back to the previous
screen or cancel a command.
Press the (home) button to go back to the home
screen of the driver information interface. Models with Display Audio
Models with Display Audio
/
(Seek/Skip)
Buttons
VOL ( +
/ VOL ( -
(Volume) ButtonsLeft Selector Wheel (home) Button
(back)
button
* Not available on all models

250 uu Audio System u Audio Remote Controls
Features Roll up or down:
FM
AM
SiriusXM ® *
USB1
USB2 *
Bluetooth ® Audio
Smartphone Connection
(Apple CarPlay/Android Auto)To cycle through the audio modes, roll up or down
and then press the left selector wheel:
* Not available on all models

251uu Audio System u Audio Remote Controls
Features
/ (Seek/Skip) Buttons
• When listening to the radio
Press : To select the next preset radio station.
Press : To select the previous preset radio station.
Press and hold : To select the next strong station.
Press and hold : To select the previous strong station.
• When listening to an iPod, USB flash drive, or Bluetooth ® Audio, or Smartphone
Connection
Press : To skip to the next song.
Press : To go back to the beginning of the current or previous song.
• When listening to a USB flash drive
Press and hold : To skip to the next folder.
Press and hold : To go back to th e previous folder.

252
Features Audio System Basic Operation To use the audio system function, the po wer mode must be in ACCESSORY or ON.
Use the selector knob or MENU/CLOCK
button to access some audio functions.
Press to switch between the normal and
extended display fo r some functions.
Selector knob: Rotate left or right to scroll
through the available ch oices. Press to set
your selection.
MENU/CLOCK button: Press to select any
mode.
The available mode includes the wallpaper,
display, clock, langu age setup, and play
modes. Play modes can be also selected from
scan, random, repeat, and so on.
(Back) button: Press to go back to the previous display.
(Sound) button: Press to select the sound setting mode.
(Day/Night) button: Press to change the au dio/information screen
brightness.
Press , then adjust the brightness using .
u Each time you press , the mode sw itches between the daytime mode,
nighttime mode and OFF mode.Models with color audio
1 Audio System Basic Operation
These indications are used to show how to operate
the selector knob.
Rotate to select.
Press to enter.
Menu Items
2 Adjust Clock P. 164
2 Wallpaper Setup P. 255
2 Display Setup P. 258
2 Scan P. 300
2 Play Mode P. 263
2 RDS Settings P. 260
2 Bluetooth P. 269
Press the SOURCE , VOL ( +
/ VOL ( -
, or
button on the steering whee l to change any audio
setting.
2 Audio Remote Controls P. 248 (Day/Night)
Button Selector Knob
MENU/CLOCK Button (Back) button
(Sound) Button
Menu Display

253uu Audio System Basic Operation u Audio/Information Screen
Continued
Features
Audio/Information Screen Displays the audio status and wallpaper. From this screen, you can go to various
setup options.
■ Switching the Display Audio
Audio/Information Screen
Clock/Wallpaper Trip computer (History of Trip A)Trip computer (Current Drive)

254 uu Audio System Basic Operation u Audio/Information Screen
Features ■ Audio
Shows the current audio information.
■ Trip computer (Current Drive)
Shows the range, and instant and average fu el economy of the current trip, as well
as the average fuel economy from your last trip.
■ Trip computer (History of Trip A)
Shows the average fuel economy and distance traveled for the current trip, as well
as the average fuel economy and distances traveled during the last three driving
cycles.
Each time you reset the trip meter A, the information on the display updates. The
history of the previous th ree driving cycles is kept.
■ Clock/Wallpaper
Shows a clock screen or an image you import.
■ Change display
1. Press the MENU/CLOCK button.
2. Rotate to select Settings , then press .
3. Rotate to select Display Change , then press .
4. Rotate to select Clock/Wallpaper , then press .
u If you want to return to the audio display, select Audio .