2019 HONDA ACCORD HYBRID set clock

12
Quick Reference Guide Controls (P 163)
Clock (P164)
a Press the MENU/CLOCK button.
b Select Adjust Clock , then press .
c Rotate to adjust the hours.
d Press to switch to minute
adjustment.
e Rotate to adjust the minutes.
f Press to switch to Set .
g Press to complete clock adjustment.Models with color audio
To adjust time
To adjust date
a Press , then select Settings .
b Select System , then Day & Time .
c Select Set Date & Time .
d Select Automatic Date & Time , then
select OFF .Models with Display Audio
e Select Set Date or Set Time .
f Adjust the dates, hours and minutes by
selecting / .
g Select Save to set the date or time.
The navigation system receives signals from
GPS satellites, updating the clock
automatically.
ENGINE START/STOP
Button (P190)
Press the button to change the vehicle’s
power mode. 3 4
Models with navigation system

18
Quick Reference Guide Audio System (P 252, 273)
(P 252)Models with color audio
(Seek/Skip) Button
Selector Knob (Day/Night) Button
VOL / (Volume/Power) KnobRADIO Button
(Sound) Button
Preset Buttons ( 1 - 6 ) (Seek/Skip) ButtonMEDIA Button
MENU/CLOCK Button (Phone) Button
(Back) ButtonAudio/Information Screen

164
Controls ClockAdjusting the Clock You can adjust the time manually in the audio/information scr een, with the power
mode in ON.
1. Press the MENU/CLOCK button.
2. Select Adjust Clock , then press .
3. Rotate to adjust the hours.
4. Press to switch to minute adjustment.
5. Rotate to adjust the minutes.
6. Press to switch to Set .
7. Press to complete clock adjustment.■ Adjusting the Time 1 Clock
The clock is automatica lly updated through the
navigation system, so the ti me does not need to be
adjusted.
These indications are used to show how to operate
the selector knob.
Rotate to select.
Press to enter.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2 Customized Features P. 370
You can turn the clock display on and off.
2 Customized Features P. 370Models with navigation system
Models with color audio
MENU/CLOCK Button
Selector Knob Models with color audio

165 uu Clock u Adjusting the Clock
Controls
1. Press the , then select Settings .
2. Select System .
3. Select Day & Time .
4. Select Set Date & Time .
5. Select Automatic Date & Time , then
select OFF .
To adjust time:
6. Select Set Time .
7. Selecting / .
8. Select Save to set the time.
To adjust date:
6. Select Set Date .
7. Selecting / .
8. Select Save to set the date. 1 Clock
You can also adjust the clock by touching the clock
displayed on the upper right corner of the display or
the Clock icon on the home screen.
1. Touch the clock on the display.
The clock screen of the select face-type appears.
2. Select Settings .
3. Select Day & Time .
4. Select Set Date & Time .
5. Select Automatic Date & Time , then select OFF .
6. Select Set Date or Set Time .
7. Adjusting the dates, hours and minutes by
selecting / .
8. Select Save to set the time.
You can customize the clock display to show the 12
hour clock or 24 hour clock.
2 Customized Features P. 381
You can customize the date display to MM/DD/YYYY,
DD/MM/YYYY or YYYY/MM/DD.
2 Customized Features P. 381Models with Display Audio
3 4Models with Display Audio
3 4
3 4

252
Features Audio System Basic Operation To use the audio system function, the po wer mode must be in ACCESSORY or ON.
Use the selector knob or MENU/CLOCK
button to access some audio functions.
Press to switch between the normal and
extended display fo r some functions.
Selector knob: Rotate left or right to scroll
through the available ch oices. Press to set
your selection.
MENU/CLOCK button: Press to select any
mode.
The available mode includes the wallpaper,
display, clock, langu age setup, and play
modes. Play modes can be also selected from
scan, random, repeat, and so on.
(Back) button: Press to go back to the previous display.
(Sound) button: Press to select the sound setting mode.
(Day/Night) button: Press to change the au dio/information screen
brightness.
Press , then adjust the brightness using .
u Each time you press , the mode sw itches between the daytime mode,
nighttime mode and OFF mode.Models with color audio
1 Audio System Basic Operation
These indications are used to show how to operate
the selector knob.
Rotate to select.
Press to enter.
Menu Items
2 Adjust Clock P. 164
2 Wallpaper Setup P. 255
2 Display Setup P. 258
2 Scan P. 300
2 Play Mode P. 263
2 RDS Settings P. 260
2 Bluetooth P. 269
Press the SOURCE , VOL ( +
/ VOL ( -
, or
button on the steering whee l to change any audio
setting.
2 Audio Remote Controls P. 248 (Day/Night)
Button Selector Knob
MENU/CLOCK Button (Back) button
(Sound) Button
Menu Display

253uu Audio System Basic Operation u Audio/Information Screen
Continued
Features
Audio/Information Screen Displays the audio status and wallpaper. From this screen, you can go to various
setup options.
■ Switching the Display Audio
Audio/Information Screen
Clock/Wallpaper Trip computer (History of Trip A)Trip computer (Current Drive)

254 uu Audio System Basic Operation u Audio/Information Screen
Features ■ Audio
Shows the current audio information.
■ Trip computer (Current Drive)
Shows the range, and instant and average fu el economy of the current trip, as well
as the average fuel economy from your last trip.
■ Trip computer (History of Trip A)
Shows the average fuel economy and distance traveled for the current trip, as well
as the average fuel economy and distances traveled during the last three driving
cycles.
Each time you reset the trip meter A, the information on the display updates. The
history of the previous th ree driving cycles is kept.
■ Clock/Wallpaper
Shows a clock screen or an image you import.
■ Change display
1. Press the MENU/CLOCK button.
2. Rotate to select Settings , then press .
3. Rotate to select Display Change , then press .
4. Rotate to select Clock/Wallpaper , then press .
u If you want to return to the audio display, select Audio .

Continued
255uu Audio System Basic Operation u Audio/Information Screen
Features
You can change, store, and delete the wa llpaper on the audio/information screen.
■ Import wallpaper
You can import up to three images, one at a
time, for wallpaper from a USB flash drive.
1. Connect the USB flash drive to the USB port. 2 USB Port(s) P. 245
2. Press the MENU/CLOCK button.
3. Rotate to select Settings , then press
.
4. Rotate to select Clock/Wallpaper
Type , then press .
5. Rotate to select Wallpaper , then
press .
6. Rotate to select Import , then press
.
u The picture name is displayed on the
list.
7. Rotate to select a desired picture, then
press .
u The selected picture is displayed.
8. Press to save the picture.
9. Press to select OK .
10. Rotate to select a location to save the
picture, then press .
u The display will retu rn to the wallpaper
setting screen.■ Wallpaper Setup 1 Wallpaper Setup
• When importing wallpaper files, the image must be
in the USB flash driv e’s root directory.
Images in a folder cannot be imported.
• The file name must be fewer than 32 characters.
• The file format of the im age that can be imported
is BMP (bmp) or JPEG (jpg).
• The individual file size limit is 2 MB.
• The maximum image size is 1,920 x 936 pixels. If
the size of the image is small, it will be enlarged,
with the aspect ratio remaining the same.
• Up to 255 files can be selected.
• If the USB flash drive doe s not have any pictures,
the Unable to load image. message appears.
• The wallpaper setup is limited while driving.