2018 Lexus LC500 lexus LC500 2018 Navigation Manual

49
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
The Bluetooth® settings can be con-
firmed and changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Detailed settings”.
5 Select the desired item to be set.
Select to set Bluetooth® connec-
tion on/off. ( P.49)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® devices. ( P.49)
Select to edit the system informa-
tion. ( P.50)
Select to reset all setup items.
1 Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth® device is automatically
connected when the engine switch
is in ACCESSORY or
IGNITION ON mode .
When “Bluetooth* power” is off:
The Bluetooth® device is discon-
nected, and the system will not connect
to it next time.
●While driving, the auto connection state can be changed from off to on, but can-not be changed from on to off.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
The automatic connection priority of
the registered Bluetooth® devices can
be changed.
1 Select “Preferred device settings”.
2 Select the desired item to be set.
Select to set automatic connection
priority on/off.
Select to change the automatic
connection priority of the regis-
tered Bluetooth® phones.
“Detailed settings” screen
Changing “Bluetooth* power”
A
B
C
D
Setting automatic connection
priority
A
B

50
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.50)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® audio players.
( P.50)
Select to reset all setup items.
●A newly registered Bluetooth® device will automatically be given the highest automatic connection priority.
■Changing phone automatic con-
nection priority
1 Select “Preferred phones”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
■Changing audio player automatic
connection priority
1 Select “Preferred audio players”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
1 Select “System information”.
2 Select the desired item to be set.
Displays system name. Can be
changed to a desired name.
( P.51)
PIN code used when the
Bluetooth® device was registered.
Can be changed to a desired code.
( P.51)
Device address is unique to the
C
D
Editing the system information
A
B
C

51
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
device and cannot be changed.
Select to set the phone connection
status display on/off.
Select to set the connection status
display of the audio player on/off.
Compatibility profile of the system
Select to reset all setup items.
■Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select “OK”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select the items to be set.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
D
E
F
G
Connecting to internet via
Wi-Fi®
Using the Wi-Fi® function, this sys-
tem can connect to the internet,
which allows the use of the con-
nected services, traffic information,
etc.
Displaying the Wi-Fi® settings
screen

52
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Select to turn the Wi-Fi® function
on/off. ( P.52)
Select to access to network on/off.
Displays connected network name
Select to search for available net-
works that can be connected.
( P.52)
Select to connect quickly to a WPS
compatible Wi-Fi® device.
( P.53)
Select to set the detailed Wi-Fi®
settings. ( P.53)
Displays status of the Miracast™
connection. ( P.142)
“On”: Connecting
“Off”: Not connecting
When turned on, “Available networks”
and “Easy setup” can be selected.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Wi-Fi* power”.
 Each time it is selected, the “Wi-Fi*
power” is turned on/off.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Available networks can be searched
for and connected to.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Available networks”.
5 Select the desired network.
 When a network with is selected
and the password enter screen is
displayed, enter the password then
Wi-Fi® settings screen
A
B
C
D
E
F
G
Turning Wi-Fi® function on/off
Connecting to a network

53
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
select “OK”.
 The network that was selected Pre-
ferred Network is marked with .
 If button is pressed on Remote
Touch during displaying this screen,
the following function can be set up.
“Details”: Select to display details about the
network.
“Add Wi-Fi* network”: Select to add a
Wi-Fi® network that is not currently dis-
played.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
■Adding a Wi-Fi® network
Available networks which are not dis-
played by searching can be added.
1 Press the button on the Remote
Touch.
2 Select “Add Wi-Fi* network”.
3 Enter the network name and select
“OK”.
4 Select the security type.
5 Enter the password and select
“OK”.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
If a Wi-Fi® device is Wi-Fi Protected
Setup™ compatible, it can be con-
nected to more quickly.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Easy setup”.
5 Select “PIN code” or “Push button”
as determined by the device.
6 Operate the Wi-Fi® device to con-
nect.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select “Detailed settings”.
5 Select the items to be set.
Select to change the listing order of
your preferred networks and to
Connecting quickly
Detailed Wi-Fi® settings
A

54
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
delete networks from the list.
( P.54)
Select to set automatic connection
to network on/off. When set to on,
the system will automatically con-
nect to the preferred networks that
have been registered.
Select to set the automatic connec-
tion message notification display
on/off.
Select to reset all setup items.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Any network connected to in the past
is set as a preferred network. The pri-
ority of the networks to connect to can
be changed.
1 Select “Reorder/Remove preferred
networks”.
2 Select the desired network and
select “Move up” or “Move down”
to change the connection priority
of the network.
“Remove”: Select to delete a network.
●If a network is being connected to, pre-
ferred network settings cannot be changed.
Reception level appears on the right
upper side of the screen. ( P.18)
●Communication standards
•802.11b •802.11g•802.11n
●Security•WEP
•WPA™*
Preferred network settings
B
C
D
Wi-Fi® function operating hints
WARNING
●Use Wi-Fi® devices only when safe
and legal to do so.
●Your audio unit is fitted with Wi-Fi® antennas. People with implantable car-
diac pacemakers, cardiac resynchro- nization therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable distance
between themselves and the Wi-Fi®
antennas. The radio waves may affect the opera-tion of such devices.
●Before using Wi-Fi® devices, users of
any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-
pacemakers or implantable cardio- verter defibrillators should consult the manufacturer of the device for infor-
mation about its operation under the influence of radio waves.Radio waves could have unexpected
effects on the operation of such medi- cal devices.
Conditions displayed with Wi-Fi®
icon
Specifications

55
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
•WPA2™*
• Wi-Fi Protected Setup™*
*: WPA™, WPA2™ and Wi-Fi Protected
Setup™ are trademark of Wi-Fi Alli-
ance®.

56
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
2-3.Other settings
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select the items to be set.
 “Clock”
Select to change the time zone, set
the daylight saving time on/off and
set the automatic adjustment of the
clock on/off. ( P.57)
 “Language”
Select to change the language.
 “Display”
Select to adjust the contrast and
brightness of the screens, turn the
screen off, etc. ( P.58)
 “Voice recognition lang.”
Select to change the voice recogni-
tion language.
 “Theme setting”
Select to change the screen theme
setting.
 “Units of measurement”
Select to change the unit of measure
for distance/fuel consumption.
 “Auto change to screen”
Select to set automatic screen
changes from the audio/air condi-
tioning control screen to the previ-
ous screen to on/off. When set to
on, the screen will automatically
return to the previous screen from
the audio/air conditioning control
screen after 20 seconds.
 “Selection sound”
Select to set the selection sounds
on/off.
 “Pointer sound”
Select to set the pointer sounds
on/off.
 “Error sound”
Select to set the error sounds on/off.
 “Pointer sound volume”
Select to adjust the pointer sound
volume.
General settings
Settings are available for automatic
screen change, operation sounds,
etc.
Displaying the general settings
screen
General settings screen