2018 Lexus LC500 reset

34
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
1Select .
2 Select the desired source.
■Radio operation
On the side display, preset stations can
be selected.
■Media operation
Operations such as selecting a chap-
ter, file or track are carried out on the
screen.
Select to select a chapter/track/file.
Select and hold to rewind.
Select to stop the video screen.
Select to play/pause.
Select to select a chapter/track/file.
• During playback: Select and hold to fast
forward.
• During a pause: Select and hold to slow
forward.
●Depending on the audio source, some functions may not be available.
Audio/visual system
Switching modes
A
B
C
D

48
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
7Confirm and change the
Bluetooth® device information.
The name of the Bluetooth® device
is displayed. It can be changed to a
desired name. ( P.48)
Select to set the Bluetooth® audio
player connection method.
( P.48)
Device address is unique to the
device and cannot be changed.
Phone number is unique to the
Bluetooth® phone and cannot be
changed.
Compatibility profile is unique to
the Bluetooth® device and cannot
be changed.
Select to reset all setup items.
●If 2 Bluetooth® devices have been regis- tered with the same device name, the devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
1 Select “Device name”.
2 Enter the name and select “OK”.
●Even if the device name is changed, the
name registered in your Bluetooth® device does not change.
1 Select “Connect audio player
from”.
2 Select the desired connection
method.
“Vehicle”: Select to connect the audio sys- tem to the audio player.
“Device”: Select to connect the audio player to the audio system.
 Depending on the audio player, the
“Vehicle” or “Device” connection
method may be best. As such, refer
to the manual that comes with the
audio player.
A
B
C
D
E
F
Changing a device name
Setting audio player connection
method

49
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
The Bluetooth® settings can be con-
firmed and changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Detailed settings”.
5 Select the desired item to be set.
Select to set Bluetooth® connec-
tion on/off. ( P.49)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® devices. ( P.49)
Select to edit the system informa-
tion. ( P.50)
Select to reset all setup items.
1 Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth® device is automatically
connected when the engine switch
is in ACCESSORY or
IGNITION ON mode .
When “Bluetooth* power” is off:
The Bluetooth® device is discon-
nected, and the system will not connect
to it next time.
●While driving, the auto connection state can be changed from off to on, but can-not be changed from on to off.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
The automatic connection priority of
the registered Bluetooth® devices can
be changed.
1 Select “Preferred device settings”.
2 Select the desired item to be set.
Select to set automatic connection
priority on/off.
Select to change the automatic
connection priority of the regis-
tered Bluetooth® phones.
“Detailed settings” screen
Changing “Bluetooth* power”
A
B
C
D
Setting automatic connection
priority
A
B

50
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.50)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® audio players.
( P.50)
Select to reset all setup items.
●A newly registered Bluetooth® device will automatically be given the highest automatic connection priority.
■Changing phone automatic con-
nection priority
1 Select “Preferred phones”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
■Changing audio player automatic
connection priority
1 Select “Preferred audio players”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
1 Select “System information”.
2 Select the desired item to be set.
Displays system name. Can be
changed to a desired name.
( P.51)
PIN code used when the
Bluetooth® device was registered.
Can be changed to a desired code.
( P.51)
Device address is unique to the
C
D
Editing the system information
A
B
C

51
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
device and cannot be changed.
Select to set the phone connection
status display on/off.
Select to set the connection status
display of the audio player on/off.
Compatibility profile of the system
Select to reset all setup items.
■Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select “OK”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select the items to be set.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
D
E
F
G
Connecting to internet via
Wi-Fi®
Using the Wi-Fi® function, this sys-
tem can connect to the internet,
which allows the use of the con-
nected services, traffic information,
etc.
Displaying the Wi-Fi® settings
screen

54
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
delete networks from the list.
( P.54)
Select to set automatic connection
to network on/off. When set to on,
the system will automatically con-
nect to the preferred networks that
have been registered.
Select to set the automatic connec-
tion message notification display
on/off.
Select to reset all setup items.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
Any network connected to in the past
is set as a preferred network. The pri-
ority of the networks to connect to can
be changed.
1 Select “Reorder/Remove preferred
networks”.
2 Select the desired network and
select “Move up” or “Move down”
to change the connection priority
of the network.
“Remove”: Select to delete a network.
●If a network is being connected to, pre-
ferred network settings cannot be changed.
Reception level appears on the right
upper side of the screen. ( P.18)
●Communication standards
•802.11b •802.11g•802.11n
●Security•WEP
•WPA™*
Preferred network settings
B
C
D
Wi-Fi® function operating hints
WARNING
●Use Wi-Fi® devices only when safe
and legal to do so.
●Your audio unit is fitted with Wi-Fi® antennas. People with implantable car-
diac pacemakers, cardiac resynchro- nization therapy-pacemakers or implantable cardioverter defibrillators
should maintain a reasonable distance
between themselves and the Wi-Fi®
antennas. The radio waves may affect the opera-tion of such devices.
●Before using Wi-Fi® devices, users of
any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-
pacemakers or implantable cardio- verter defibrillators should consult the manufacturer of the device for infor-
mation about its operation under the influence of radio waves.Radio waves could have unexpected
effects on the operation of such medi- cal devices.
Conditions displayed with Wi-Fi®
icon
Specifications

126
-$@-$I@/BWJ@0.&@ &&

4-2. Radio operation
4-2.Radio operation
The radio control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “RADIO” button.
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Radio”.
Select to tune to preset sta-
tions/ensembles. ( P.126)
Favorites: Turn to move up/down
the preset stations.
Station list: Turn to move up/down
the station list.
Manual: Seek up/down (Hold to
non stop seek up/down)
Favorites: Turn to move up/down
the preset stations.
Station list: Turn to move up/down
the station list.
Manual: (AM/FM) Tune up/down
(DAB) Seek up/down.
DAB time shift screen: Turn to jump
forward/ backwards.
●The radio automatically changes to ste- reo reception when a stereo broadcast is
received.
●If the signal becomes weak, the radio
reduces the amount of channel separa- tion to prevent the weak signal from cre-ating noise. If the signal becomes
extremely weak, the radio switches from stereo to mono reception.
Up to 6 preset stations can be regis-
tered.
1 Tune in the desired station.
2 Select one of the screen buttons (1-
6) and hold it until a beep is heard.
 The station’s frequency will be dis-
played in the screen button.
 To change the preset station to a dif-
AM/FM/DAB radio
Overview
Control screen
Audio control switch
A
A
Presetting a station
B

127
4
-$@-$I@/BWJ@0.&@ &&

4-2. Radio operation
Audio/visual system
ferent one, follow the same proce-
dure.
Depending on the availability of RDS
infrastructure, the service may not
function properly.
■AF (Alternative frequency) func-
tion
A station providing good reception is
automatically selected if current
reception worsens.
■TA (Traffic announcement) func-
tion
The tuner will automatically seek a sta-
tion that regularly broadcasts traffic
information and the station broadcasts
when the traffic information program
starts.
1 A pop-up message is displayed on
the screen when the radio seeks
out a TP station.
2 Select “Continue”.
●When “FM traffic announcement” is set to “On” ( P.149), the radio will begin
seeking a TP station.
●When the program ends , the initial oper-
ation resumes.
■Traffic announcement volume
function
The volume level when receiving the
traffic announcement is memorized.
AM
Select to display the audio source
selection screen. ( P.121)
Select to display the preset station
screen.
Select to display the manual tuning
screen. ( P.128)
Select to display the sound setting
screen. ( P.123)
FM
Select to display the audio source
selection screen. ( P.121)
Select to display the preset station
screen. ( P.126)
Select to display the station list.
Select to display the manual tuning
screen. ( P.128)
RDS (Radio data system)
Sub menu
A
B
C
D
A
B
C
D