2018 Lexus LC500 reset

128
-$@-$I@/BWJ@0.&@ &&

4-2. Radio operation
Select to display the radio options
screen. ( P.128)
Select to display the sound setting
screen. ( P.123)
DAB
Select to display the audio source
selection screen. ( P.121)
Select to display the preset station
screen. ( P.126)
Select to display the station list.
Select to display the manual tuning
screen. ( P.128)
Select to display the time shift con-
trol screen. ( P.129)
Select to display the radio options
screen. ( P.128)
Select to display the sound setting
screen. ( P.123)
AM/FM
1 Select “Manual” on the sub menu.
2 Tune the desired station.
Select to seek up/down for a sta-
tion.
Select to step up/down frequen-
cies.
DAB
1 Select “Manual” on the sub menu.
2 Tune the desired ensemble or ser-
vice.
Select to set the desired ensemble.
Select to set the desired service.
1 Select “Options” on the sub menu.
2 Select the desired item to be set.
E
F
A
B
C
D
E
F
G
Manual tuning
Radio option
A
B
A
B

129
4
-$@-$I@/BWJ@0.&@ &&

4-2. Radio operation
Audio/visual system
FM
Select “Broadcaster” or “Alphabet-
ical” to set the listing order of the
station list.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select to switch to a broadcasting
station within the same local pro-
gram network.
Select on/off to set the FM radio
text feature.
DAB
Select on/off to set L-band in the
tune range. When “Off” is selected,
the physical channel range for tun-
ing operations is limited to Band III,
excluding for preset operations.
When “On” is selected, the physical
channel range fo r tuning opera-
tions includes Band III and L-band.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select on/off to set the DAB text
feature.
The service you are currently listening
to can be re-listened to at any time.
1 Select “Time shift” on the sub menu.
2 Select or to jump for-
ward/backward by 10 seconds.
Select and hold or to fast
forward /rewind.
●The times is up to 20 min.
A
B
C
D
E
A
Time shift operation (DAB)
B
C
D

146
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
4-4.A udio/visual remote controls
Some parts of the audio/visual system
can be adjusted using the switches on
the steering wheel.
Volume control switch
“MODE” switch
“< >” switch
Steering switches
Steering switch operation
ModeOperation/function
All
Press: Volume up/down
Press and hold (0.8 sec. or
more): Volume up/down
continuously
ModeOperation/function
AM, FM,
DAB, AUX
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Mute
A
B
CD,
MP3/WMA/
AAC disc,
DVD, USB,
iPod,
Bluetooth®
audio
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Pause
Miracast™Press: Change audio mode
ModeOperation/function
AM, FM
Press: Preset station
up/down (Presets screen)
Station list up/down (Sta-
tion list screen)
Seek up/down (Manual
tuning screen)
Press and hold (0.8 sec. or
more): Seek up/down con-
tinuously while the switch is
being pressed (Manual
tuning screen)
DAB
Press: Preset service
up/down (Presets screen)
Service list up/down (Sta-
tion list screen)
Ensemble seek up/down
(Manual tuning screen)
Press and hold (0.8 sec. or
more): Ensemble seek
up/down continuously
while the switch is being
pressed (Manual tuning
screen)
ModeOperation/function
C

149
4
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
Audio/visual system
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “FM”.
5 Select the desired button to be set.
Select “Broadcaster” or “Alphabet-
ical” to set the listing order of the
station list.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select to switch to a broadcasting
station within the same local pro-
gram network.
Select on/off to set the FM Radio
text feature.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DAB”.
5 Select the desired button to be set.
Select on/off to set L-band in the
tune range. When “Off” is selected,
the physical channel range for tun-
ing operations is limited to Band III,
excluding for preset operations.
When “On” is selected, the physical
channel range fo r tuning opera-
tions includes Band III and L-band.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select on/off to set the DAB text
feature.
FM radio settings
A
B
C
D
E
DAB settings
A
B
C
D

202
-$@-$I@/BWJ@0.&@ &&

7-1. Phone operation (Hands-free system for cellular phones)
played.
8 Check that a confirmation screen is
displayed when the operation is
complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
■Editing quick reply messages
This operation cannot be performed
while driving.
1 Select “Quick message”.
2 Select corresponding to the
desired message to edit.
3 Select “OK” when editing is com-
pleted.
●To reset the edited quick reply messages, select “Default”.
●Quick message #1 (“I am driving and will arrive in approximately [##] minutes.”):
This message cannot be edited and will automatically fill in [##] with the naviga-tion calculated estimated time of arrival
on the confirm message screen. If there are waypoints set, [##] to the next waypoint will be shown.
If there is no route currently set in the navigation system, Quick message #1 cannot be selected.
●Depending on the cellular phone used for receiving messages, reply function
may not be used.
Calls can be made to an e-
mail/SMS/MMS message sender’s
phone number.
This operation can be performed while
driving.
■Calling from e-mail/SMS/MMS
message display
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the desired message.
5 Select , or press the switch
on the steering wheel.
 If there are 2 or more phone num-
bers, select the desired number.
6 Check that the call screen is dis-
played.
■Calling from a number within a
message
Calls can be made to a number identi-
fied in a message’s text area in blue
font.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Phone”.
3 Select “Message” on the sub menu.
4 Select the desired message.
5 Select the text area.
Calling the message sender

205
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
Select to set the desired incoming
SMS/MMS tone.
Select “-” or “+” to adjust the
incoming SMS/MMS tone volume.
Select “-” or “+” to adjust the
incoming e-mail tone volume.
Select “-” or “+” to adjust the mes-
sage readout volume.
Select to reset all setup items.
●Depending on the type of phone, certain
functions may not be available.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Notifications”.
5 Select the desired item to be set.
Select to change where the screen
is displayed between the main dis-
play and side display.
• “Main screen”: Select to display and
operate the screen on the main display.
• “Side screen”: Select to display and
operate the screen on the side display.
For details of the screen: P.195
Select to set the SMS/MMS notifi-
cation pop-up on/off.
Select to change the incoming
SMS/MMS display.
• “Full screen”: When an SMS/MMS mes-
sage is received, the incoming
SMS/MMS display screen is displayed
and can be operated on the screen.
• “Drop-down”: When an SMS/MMS
message is received, a message is dis-
played on the upper side of the screen.
Select to set the e-mail notification
pop-up on/off.
Select to change the incoming e-
mail display.
• “Full screen”: When an e-mail is
received, the incoming e-mail display
screen is the displayed and can be oper-
ated on the screen.
• “Drop-down”: When an e-mail is
received, a message is displayed on the
upper side of the screen.
Select to set display of the con-
tact/history transfer completion
message on/off.
Select to reset all setup items.
●Depending on the phone, these functions
may not be available.
“Notifications” screen
E
F
G
H
I
A
B
C
D
E
F
G

206
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
The contact can be transferred from a
Bluetooth® phone to the system.
The contact also can be added, edited
and deleted.
The call history can be deleted and
contacts and favourites can be
changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Phone” on the sub menu.
4 Select “Contacts/Call history”.
5 Select the desired item to be set.
For PBAP compatible Bluetooth®
phones: Select to change the con-
tact/history transfer settings.
( P.206)
Select to update contacts from the
connected device. ( P.207)
Select to sort contacts by the first
name or last name field.
Select to add contacts to the favou-
rites list. ( P.210)
Select to delete contacts from the
favourites list. ( P.210)
Select to clear contacts from the
call history.*
Select to add new contacts to the
contact list.* ( P.209)
Select to edit contacts in the con-
tact list.* ( P.209)
Select to delete contacts from the
contact list.* ( P.210)
Select to reset all setup items.
*: For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic transfer” is set to off.
( P.206)
●Depending on the type of phone, certain
functions may not be available.
●Contact data is managed independently
for every registered phone. When one phone is connected, another phone’s registered data cannot be read.
The automatic contact/history function
is available for PBAP compatible
Bluetooth® phones only.
1 Select “Automatic transfer”.
“Contacts/Call history” screen
A
B
Setting automatic contact/his-
tory transfer
C
D
E
F
G
H
I
J

207
7
-$@-$I@/BWJ@0.&@ &&

7-2. Setup
Phone
2Select the desired item to be set.
Select to set automatic contact/his-
tory transfer on/off. When set to on,
the phone’s contact data and his-
tory are automatically transferred.
Select to update contacts from the
connected phone. ( P.207)
Select to set the transferred con-
tact image display on/off.
• When set to off, the contact image can-
not be displayed on the side display
when a call is received.
Select to reset all setup items.
■Updating contacts from phone
1 Select “Update now”.
 Contacts are transferred automati-
cally.
2 Check that a confirmation screen is
displayed when the operation is
complete.
 This operation may be unnecessary
depending on the type of cellular
phone.
 If another Bluetooth® device is con-
nected when transferring contact
data, depending on the phone, the
connected Bluetooth® device may
need to be disconnected.
 Depending on the type of
Bluetooth® phone being con-
nected, it may be necessary to per-
form additional steps on the phone.
When the contact is not registered
1 Select “Transfer contacts from
device”.
2 Select “From phone (Bluetooth*)”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
3 Transfer the contact data to the sys-
tem using a Bluetooth® phone.
 This operation may be unnecessary
depending on the type of cellular
phone.
 To cancel this function, select “Can-
cel”.
4 Check that a confirmation screen is
displayed when the operation is
complete.
 This function is only for OPP com-
patible Bluetooth® phone.
When the contact is registered
1 Select “Transfer contacts from
device”.
2 Select “From phone (Bluetooth*)”.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
A
B
C
D
Transfer contacts from device
From phone