2018 Lexus LC500 navigation setup

2
-$@-$I@/BWJ@0.&@ &&

TABLE OF CONTENTS
Introduction .......................................................6
Reading this manual ....................................... 8
1-1. Basic function
Display and operation switches .. 12
Remote Touch .................................... 14
Menu screen ....................................... 16
Status icon ........................................... 18
“Setup” screen .................................. 20
Information screen ........................... 21
1-2. Navigation operation
Operating the map screen .......... 22
Guiding the route ............................ 23
Registering home............................. 24
2-1. Basic information before opera-
tion
Initial screen ...................................... 28
How to use the Remote Touch.. 28
Operating the screen...................... 31
Using side display ........................... 33
Entering letters and numbers/list
screen operation .......................... 35
Linking multi-information display
and navigation system ................ 38
2-2. Network settings
Registering/Connecting
Bluetooth® device ...................... 39
Setting Bluetooth® details ........... 43
Connecting to internet via Wi-Fi®
................................................................ 51
2-3. Other settings
General settings............................... 56
Voice settings.................................... 60
Vehicle settings ................................. 61
3-1. Basic operation
Quick reference............................... 64
Map screen operation ................... 69
Map screen information ................ 71
Traffic messages............................... 76
3-2. Destination search
Search operation ............................. 79
3-3. Route guidance
Starting route guidance ................ 90
Route guidance ................................ 93
Editing route ...................................... 95
3-4. Favourite destinations
Registering an entry...................... 101
Editing the entry information ... 103
3-5. Setup
Map settings.................................... 106
Traffic message settings.............. 110
Route preferences settings ........ 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
............................................................. 115
Navigation database updates.... 117
4-1. Basic operation
Quick reference............................ 120
1Quick guide
2Basic function
3Navigation system
4Audio/visual system

1
11
-$@-$I@/BWJ@0.&@ &&

1
Quick guide
Quick guide
1-1. Basic function
Display and operation switches 12
Remote Touch ................................. 14
Menu screen .................................... 16
Status icon ........................................ 18
“Setup” screen............................... 20
Information screen ........................ 21
1-2. Navigation operation
Operating the map screen ....... 22
Guiding the route ......................... 23
Registering home.......................... 24

39
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
2-2.Network settings
■Registering from navigation sys-
tem
1 Turn the Bluetooth® connection
setting of your cellular phone on.
 This function is not available when
Bluetooth® connection setting of
your cellular phone is set to off.
2 Press the “MENU” button on the
Remote Touch.
3 Select “Setup”.
4 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When there is no registered device,
operations up to this point can also
be performed by pressing the
switch on the steering wheel.
5 Depending on situation, different
screen is displayed.
 If there is a registered device, select
“Add new device”.
 If there is no registered device,
select “Yes”.
6 When this screen is displayed,
search for the device name dis-
played on the screen of your
Bluetooth® device.
 For details about operating the
Bluetooth® device, see the manual
that comes with it.
 Depending on the type of
Bluetooth® phone or portable
device, if you do not enable the dis-
play of certain screens, your device
may not be displayed on the device
list. Refer to the instruction manual
Registering/Connecting
Bluetooth® device
To use the hands-free system, it is
necessary to register a Bluetooth®
phone with the system.
Once the phone has been regis-
tered, it is possible to use the hands-
free system.
This operation cannot be per-
formed while driving.
Registering a Bluetooth® phone
for the first time

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

3
63
-$@-$I@/BWJ@0.&@ &&

3
Navigation system
Navigation system
3-1. Basic operation
Quick reference ............................ 64
Map screen operation ............... 69
Map screen information.............. 71
Traffic messages ............................ 76
3-2. Destination search
Search operation .......................... 79
3-3. Route guidance
Starting route guidance............. 90
Route guidance............................. 93
Editing route................................... 95
3-4. Favourite destinations
Registering an entry................... 101
Editing the entry information. 103
3-5. Setup
Map settings................................. 106
Traffic message settings ........... 110
Route preferences settings..... 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
.......................................................... 115
Navigation database updates 117
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

106
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
3-5.Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select the desired item to be set.
 “Map layout”
Select to change the map layout to 3D
heading-up, 2D heading-up or 2D north-
up. ( P.107)
“Day/Night mode”
Select to change the map screen bright-
ness. ( P.107)
“Arrival information”
Select to change the display of arrival
information to estimated arrival time or
remaining travel time.
 “Speed limits”
Select to set speed limit information on/off.
(If equipped) ( P.108)
“Automatic map zoom”
Select to change the zoom level that is
automatically zoomed into when an area
requiring caution is approached. ( P.109)
“POIs on map”
Select to set displayed POI icon catego-
ries. ( P.109)
“Show guidance arrow”
Select to set the display of route guidance
arrow on/off. ( P.93)
“Show street name”
Select to set the display of the name of the
current street or the next street on/off.
( P.93)
“Show 3D buildings”
Select to set the display of 3D buildings
on/off. ( P.71)
“Show 3D landmarks”
Select to set the display of 3D landmarks
on/off. ( P.72)
“Show signposts”
Select to set the display of signposts on/off.
( P.93)
“Show junction view”
Select to set the display of the junction view
on/off. ( P.94)
“Show lane recommendation”
Select to set the recommended lane dis-
Map settings
Displaying map setting screen
Map setting screen

107
3
-$@-$I@/BWJ@0.&@ &&

3-5. Setup
Navigation system
play on/off. (P.94)
“Show traffic bar”
Select to set the display of traffic bar on/off.
( P.93)
“Show traffic icons”
Select to set the display of the traffic mes-
sage icons on/off. ( P.76)
“Show speed cameras”
Select to set the display of the safety cam-
eras icons on/off. ( P.72)
“Use online data for speed cam-
eras”
Select to enable using online data to show
the safety camera icons.
 “Save recent route”
Select to display a trail of breadcrumbs on
the map.
 “Show highway mode”
Select to set the display of the highway
mode on/off. ( P.93)
“Country information”
This function goes to another screen
where it is possible to:
• Set country information screen when
crossing the border on/off.
• See country information for any country
in the database.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Map layout”.
6 Select the desired item.
Select to display the map screen in
3D heading-up.
Select to display the map screen in
2D heading-up.
Select to display the map screen in
2D north-up.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Navigation” on the sub
menu.
4 Select “Map”.
5 Select “Day/Night mode”.
6 Select the desired item.
Select to change the map screen to
Map layout
Day/Night mode
A
B
C
A