2018 Lexus LC500 lexus LC500 2018 Navigation Manual

153
4
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
Audio/visual system
1601Punjabi
1612Polish
1619Pashto, Pushto
1721Quechua
1813Rhaeto-Romance
1814Kirundi
1815Romanian
1823Kinyarwanda
1901Sanskrit
1904Sindhi
1907Sango
1908Serbo-
Croatian
1909Sinhalese
1911Slovak
1912Slovenian
1913Samoan
1914Shona
1915Somali
1917Albanian
1918Serbian
1919Siswati
1920Sesotho
1921Sundanese
1923Swahili
2001Tamil
2005Telugu
2007Tajik
CodeLanguage
2008Thai
2009Tigrinya
2011Turkmen
2012Tagalog
2014Setswana
2015Tongan
2018Turkish
2019Tsonga
2020Tatar
2023Twi
2111Ukrainian
2118Urdu
2126Uzbek
2209Vietnamese
2215Volapük
2315Wolof
2408Xhosa
2515Yoruba
2621Zulu
CodeLanguage

154
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
4-6.Tips for operating the audio/visual system
●The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio/visual system
which you are listening to. However, this does not indicate a malfunction.
Usually, a problem with radio reception
does not mean there is a problem with
the radio  it is just the normal result
of conditions outside the vehicle.
For example, nearby buildings and ter-
rain can interfere with FM reception.
Power lines or phone wires can inter-
fere with AM signals. And of course,
radio signals have a limited range. The
farther the vehicle is from a station, the
weaker its signal will be. In addition,
reception conditions change con-
stantly as the vehicle moves.
Here, some common reception prob-
lems that probably do not indicate a
problem with the radio are described.
■FM
Fading and drifting stations: Generally,
the effective range of FM is about 40
km (25 miles). Once outside this
range, you may notice fading and drift-
ing, which increase with the distance
from the radio transmitter. They are
often accompanied by distortion.
Multi-path: FM signals are reflective,
making it possible for 2 signals to reach
the vehicle’s antenna at the same time.
If this happens, the signals will cancel
each other out, causing a momentary
flutter or loss of reception.
Static and fluttering: These occur when
signals are blocked by buildings, trees
or other large objects. Increasing the
bass level may reduce static and flut-
tering.
Station swapping: If the FM signal
being listened to is interrupted or
weakened, and there is another strong
station nearby on the FM band, the
radio may tune in the second station
until the original signal can be picked
up again.
■AM
Fading: AM broadcasts are reflected
by the upper atmosphere  especially
at night. These reflected signals can
interfere with those received directly
from the radio station, causing the
radio station to sound alternately
strong and weak.
Station interference: When a reflected
signal and a signal received directly
from a radio station are very nearly the
same frequency, they can interfere with
each other, making it difficult to hear
the broadcast.
Static: AM is easily affected by external
sources of electrical noise, such as high
Operating information
NOTICE
●To avoid damage to the audio/visual
system:
• Be careful not to spill beverages over
the audio/visual system.
• Do not put anything other than an
appropriate disc into the disc slot.
Radio

155
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
tension power lines, lightening or elec-
trical motors. This results in static.
 This DVD player is intended for use
with 4.7 in. (12 cm) discs only.
 Extremely high temperatures can
keep the DVD player from working.
On hot days, use the air condition-
ing system to cool the inside of the
vehicle before using the player.
 Bumpy roads or other vibrations
may make the DVD player skip.
 If moisture gets into the DVD player,
the discs may not be able to be
played. Remove the discs from the
player and wait until it dries.
■DVD player
DVD logo is a trademark of DVD For-
mat/Logo Licensing Corporation.
 Use only discs marked as shown
above. The following products may
not be playable on your player:
•SACD
•dts CD
• Copy-protected CD
•DVD-Audio
•Video CD
•DVD-RAM
DVD player and disc
WARNING
●The DVD player uses an invisible laser
beam which could cause hazardous radiation exposure if directed outside the unit. Be sure to operate the player
correctly.
Audio CDs
DVD video
discs
DVD-R/RW
discs

156
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Special shaped discs
Transparent/translucent discs
Low quality discs
Labeled discs
 Handle discs carefully, especially
when inserting them. Hold them on
the edge and do not bend them.
Avoid getting fingerprints on them,
particularly on the shiny side.
 Dirt, scratches, warping, pin holes
or other disc damage could cause
the player to skip or to repeat a sec-
tion of a track. (To see a pin hole,
hold the disc up to the light.)
 Remove discs from the players
when not in use. Store them in their
plastic cases away from moisture,
NOTICE
●Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the illus-
trations. The use of such discs may damage the player, or it may be impos-sible to eject the disc.
●This system is not designed for use of
Dual Discs. Do not use Dual Discs because they may cause damage to the player.
●Do not use discs with a protection ring.
The use of such discs may damage the player, or it may be impossible to eject the disc.
●Do not use printable discs. The use of
such discs may damage the player, or it may be impossible to eject the disc.

157
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
heat and direct sunlight.
To clean a disc: Wipe it with a soft, lint-
free cloth that has been dampened
with water. Wipe in a straight line from
the centre to the edge of the disc (not
in circles). Dry it with another soft, lint-
free cloth. Do not use a conventional
record cleaner or anti-static device.
■CD-R/RW and DVD-R/RW discs
 CD-R/CD-RW discs that have not
been subject to the “finalizing pro-
cess” (a process that allows discs to
be played on a conventional CD
player) cannot be played.
 It may not be possible to play CD-
R/CD-RW discs recorded on a
music CD recorder or a personal
computer because of disc charac-
teristics, scratches or dirt on the
disc, or dirt, condensation, etc. on
the lens of the unit.
 It may not be possible to play discs
recorded on a personal computer
depending on the application set-
tings and the environment. Record
with the correct format. (For details,
contact the appropriate application
manufacturers of the applications.)
 CD-R/CD-RW discs may be dam-
aged by direct exposure to sunlight,
high temperatures or other storage
conditions. The unit may be unable
to play some damaged discs.
 If you insert a CD-RW disc into the
player, playback will begin more
slowly than with a conventional CD
or CD-R disc.
 Recordings on CD-R/CD-RW can-
not be played using the DDCD
(Double Density CD) system.
■DVD video discs
This DVD player conforms to
NTSC/PAL color TV formats. DVD
video discs conforming to another for-
mat such as SECAM cannot be used.
Region codes: Some DVD video discs
have the following region code indicat-
ing which countries the DVD video
disc can be played in on this DVD
player. If you attempt to play an inap-
propriate DVD video disc on this
player, error message appears on the
screen. Even if the DVD video disc
does not have a region code, there are
cases when it cannot be used.
CodeCountry
ALLAll countries
2Europe
5Eastern Europe, Russia

158
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Marks shown on DVD video discs
■DVD video disc glossary
DVD video discs: Digital Versatile Disc
that holds video. DVD video discs have
adopted “MPEG2”, one of the world
standards of digital compression tech-
nologies. The picture data is com-
pressed by 1/40 on average and
stored. Variable rate encoded technol-
ogy in which the volume of data
assigned to the picture is changed
depending on the picture format has
also been adopted. Audio data is
stored using PCM and Dolby Digital,
which enables higher quality of sound.
Furthermore, multi-angle and multi-
language features will also help users
enjoy the more advanced technology
of DVD video.
Viewer restrictions: This feature limits
what can be viewed in conformity with
a level of restrictions of the country.
The level of restrictions varies depend-
ing on the DVD video disc. Some DVD
video discs cannot be played at all, or
violent scenes are skipped or replaced
with other scenes.
 Level 1: DVD video discs for chil-
dren can be played.
 Level 2 - 7: DVD video discs for chil-
dren and G-rated movie can be
played.
 Level 8: All types of the DVD video
discs can be played.
Multi-angle feature: The same scene
can be enjoyed from different angles.
Multi-language feature: The subtitle
and audio language can be selected.
Region codes: The region codes are
provided on DVD players and DVD
discs. If the DVD video disc does not
have the same region code as the DVD
player, you cannot play the disc on the
DVD player. For region codes:
( P.157)
Audio: This DVD player can play linear
Indicates NTSC/PAL
format of color TV.
Indicates the number
of audio tracks.
Indicates the number
of language subtitles.
Indicates the number
of angles.
Indicates the screen to
be selected.
Wide screen: 16:9
Standard: 4:3
Indicates a region
code by which this
video disc can be
played.
“ALL”: in all countries
Number: region code

159
4
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
Audio/visual system
PCM, Dolby Digital and MPEG audio
format DVDs. Other decoded types
cannot be played.
Title and chapter: Video and audio pro-
grams stored in DVD video discs are
divided into parts by title and chapter.
Title: The largest unit of the video and
audio programs stored on DVD video
discs. Usually, one movie, one album,
or one audio program is assigned as a
title.
Chapter: A unit smaller than that of
title. A title comprises of several chap-
ters.
■Certification
●Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
■Certification
 “Made for iPod” and “Made for
iPhone” mean that an electronic
accessory has been designed to
connect specifically to iPod or
iPhone, respectively, and has been
certified by the developer to meet
Apple performance standards.
 Apple is not responsible for the
operation of this device or its com-
pliance with safety and regulatory
standards. Please note that the use
of this accessory with iPod or
iPhone, may affect wireless perfor-
mance.
 iPhone, iPod, iPod nano, and iPod
touch are trademarks of Apple Inc.,
registered in the U.S. and other
countries. Lightning is a trademark
of Apple Inc.
 The Lightning connector works with
iPhone 6s Plus, iPhone 6s, iPhone
SE, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, iPod touch
(5th and 6th generation), and iPod
nano (7th generation).
 The 30-pin connector works with
iPhone 4s, iPhone 4, iPhone 3GS,
iPhone 3G, iPhone, iPod touch (1st
through 4th genera tion), and iPod
nano (1st through 6th generation).
 USB works with iPhone 6s Plus,
iPhone 6s, iPhone SE, iPhone 6
Plus, iPhone 6, iPhone 5s, iPhone
5c, iPhone 5, iPhone 4s, iPhone 4,
iPhone 3GS, iPhone 3G, iPod
touch (1st through 6th generation),
and iPod nano (1st through 7th gen-
eration).
 Bluetooth® technology works with
iPhone SE, iPhone 6s Plus, iPhone
6s, iPhone 6 Plus, iPhone 6, iPhone
5s, iPhone 5c, iPhone 5, iPhone 4s,
iPhone 4, iPhone 3GS, iPhone 3G,
and iPod touch (2nd through 6th
generation), and iPod nano (7th
iPod

160
-$@-$I@/BWJ@0.&@ &&

4-6. Tips for operating the audio/visual system
generation).
■Compatible models
The following iPod®, iPod nano®, iPod
touch® and iPhone® devices can be
used with this system.
Made for
• iPod touch (6th generation)
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPhone 6s Plus
•iPhone 6s
•iPhone SE
• iPhone 6 Plus
•iPhone 6
•iPhone 5s
•iPhone 5c
•iPhone 5
•iPhone 4s
•iPhone 4
•iPhone 3GS
•iPhone 3G
●Depending on differences between mod- els or software versions etc., some mod-
els might be incompatible with this system.
This device supports high-resolution
sound sources.
Supported formats and playable media
are as follows.
■Supported formats
WAV, FLAC, ALAC, OGG Vorbis
■Playable media
USB
■Compatible file format (audio)
■Compatible file format (video)
■Folders in the deviceHigh-resolution sound source
File information
Compatible USB devices
USB communica-
tion formats
USB 2.0 HS (480
Mbps)
File formatsFAT 16/32
Correspondence
classMass storage class
Compatible audio format
Compatible compressed files
USBDISC
MP3/WMA/AAC/
WAV(LPCM)/FLA
C/ALAC/OGG
Vorbis
MP3/WMA/AAC
USBDISC
WMV/AVI/MP4/M
4V-
USBDISC
Maximum 3000Maximum 192