2018 Lexus LC500 wheel

13
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
WARNING
●For safety reasons, drivers should avoid performing operations as much as possible while driving. Performing
operations while driving may cause the driver to mistakenly operate the steer-ing wheel, which may lead to an acci-
dent. Stop the vehicle before using. Furthermore, avoid looking at the screen as much as possible while driv-
ing.
●Always follow the actual traffic regula- tions and drive according to the road conditions. Routes displayed by the
destination guidance may include routes where the vehicle is prohibited from entering due to changes to speed
limit signs and routes where the road is too narrow to pass through.
NOTICE
●To prevent the 12-volt battery from becoming fully depleted, do not use
the remote touch for long periods of time while the engine/hybrid system is turned off.

38
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Linking multi-information
display and navigation sys-
tem
The following functions of the navi-
gation system are linked with the
multi-information display in the
instrument cluster:
 Navigation
 Audio
 Phone
etc.
These functions can be operated
using the meter control switches on
the steering wheel. For details,
refer to “OWNER’S MANUAL”.

39
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
2-2.Network settings
■Registering from navigation sys-
tem
1 Turn the Bluetooth® connection
setting of your cellular phone on.
 This function is not available when
Bluetooth® connection setting of
your cellular phone is set to off.
2 Press the “MENU” button on the
Remote Touch.
3 Select “Setup”.
4 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
 When there is no registered device,
operations up to this point can also
be performed by pressing the
switch on the steering wheel.
5 Depending on situation, different
screen is displayed.
 If there is a registered device, select
“Add new device”.
 If there is no registered device,
select “Yes”.
6 When this screen is displayed,
search for the device name dis-
played on the screen of your
Bluetooth® device.
 For details about operating the
Bluetooth® device, see the manual
that comes with it.
 Depending on the type of
Bluetooth® phone or portable
device, if you do not enable the dis-
play of certain screens, your device
may not be displayed on the device
list. Refer to the instruction manual
Registering/Connecting
Bluetooth® device
To use the hands-free system, it is
necessary to register a Bluetooth®
phone with the system.
Once the phone has been regis-
tered, it is possible to use the hands-
free system.
This operation cannot be per-
formed while driving.
Registering a Bluetooth® phone
for the first time

120
-$@-$I@/BWJ@0.&@ &&

4-1. Basic operation
4-1.Basic operation
The audio control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “RADIO” or “MEDIA”
button.
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Radio”
or “Media”.
The audio functions can also be displayed and operated on the side display. ( P.33)
■Control screen
■Audio control switch
•Using the radio ( P.126)
• Playing an audio CD or
MP3/WMA/AAC disc ( P.130)
• Playing a DVD ( P.132)
• Playing a USB memory ( P.135)
• Playing an iPod ( P.137)
• Playing a Bluetooth® device
( P.139)
• Using the Miracast™ ( P.142)
•Using the AUX port ( P.144)
• Using the steering wheel audio
switches ( P.146)
• Audio system settings ( P.148)
●The position and shapes of the buttons may differ slightly between right-hand
drive vehicles and left-hand drive vehi- cles.
Quick reference
Functional overview

146
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
4-4.A udio/visual remote controls
Some parts of the audio/visual system
can be adjusted using the switches on
the steering wheel.
Volume control switch
“MODE” switch
“< >” switch
Steering switches
Steering switch operation
ModeOperation/function
All
Press: Volume up/down
Press and hold (0.8 sec. or
more): Volume up/down
continuously
ModeOperation/function
AM, FM,
DAB, AUX
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Mute
A
B
CD,
MP3/WMA/
AAC disc,
DVD, USB,
iPod,
Bluetooth®
audio
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Pause
Miracast™Press: Change audio mode
ModeOperation/function
AM, FM
Press: Preset station
up/down (Presets screen)
Station list up/down (Sta-
tion list screen)
Seek up/down (Manual
tuning screen)
Press and hold (0.8 sec. or
more): Seek up/down con-
tinuously while the switch is
being pressed (Manual
tuning screen)
DAB
Press: Preset service
up/down (Presets screen)
Service list up/down (Sta-
tion list screen)
Ensemble seek up/down
(Manual tuning screen)
Press and hold (0.8 sec. or
more): Ensemble seek
up/down continuously
while the switch is being
pressed (Manual tuning
screen)
ModeOperation/function
C

173
5
-$@-$I@/BWJ@0.&@ &&

5-2. Mobile Assistant operation
Speech command system
5-2.Mobile Assistant operation
Mobile Assist supports the Siri Eyes
Free Mode and Google App. The
available features and functions may
vary based on the iOS/Android version
installed on the connected device.
1 Press and hold this switch until
“Mobile assistant” screen is dis-
played.
2 Mobile Assistant can be used only
when the following screen is dis-
played.
 To cancel the Mobile Assistant,
press and hold the on the steer-
ing wheel.
 To restart Siri for additional com-
mands, press the on the steering
wheel.
• Siri can only be restarted after the sys-
tem responds to a speech command.
• After some phone and music com-
mands, the Mobile Assistant feature will
automatically end to complete the
requested action.
 The volume of the Mobile Assistant
Mobile Assistant
The Mobile Assistant function is a
voice input assist function. Mobile
Assist supports the Siri Eyes Free
Mode and Google App. When fac-
ing the microphone and instruc-
tions are spoken as if speaking on
the telephone, the contents are
interpreted and the system moves
to correspond. The system
responds by voice. To operate the
Mobile Assistant, a compatible
device must be registered and con-
nected to this system via
Bluetooth®. ( P.39)
Connectable devices and avail-
able functions
Mobile Assistant operation

174
-$@-$I@/BWJ@0.&@ &&

5-2. Mobile Assistant operation
can be adjusted using the
“PWR·VOL” knob or steering wheel
volume control switches. The
Mobile Assistant and phone call vol-
umes are synchronized.
●If the user uses Siri play song feature and
the iPhone is not connected as an audio source, the song will start playing only on the iPhone.
●While a phone call is active, the Mobile Assistant cannot be used.
●If using the navigation feature of the cellu-lar phone, ensure the active audio source
is Bluetooth® audio or iPod in order to hear turn by turn direction prompts.
●Wait for the listening beeps before using the Mobile Assistant.
●The Mobile Assistant may not recognize commands in the following situations:
• Spoken too quickly. • Spoken at a low or high volume.• The roof or windows are open.
• Passengers are talking while the Mobile Assistant is being used.• The air conditioning speed is set high.
• The air conditioning vents are turned toward the microphone.

176
-$@-$I@/BWJ@0.&@ &&

6-1. Lexus parking assist monitor
6-1.Lexus p arking assist monitor
●The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed
on the screen.
The parking assist monitor is a supple-
mental device intended to assist the
driver when backin g up. When back-
ing up, be sure to visually check all
around the vehicle both directly and
using the mirrors before proceeding. If
you do not, you may hit another vehi-
cle, and could possibly cause an acci-
dent.
Pay attention to the following precau-
tions when using the parking assist
monitor.
Lexus parking assist monitor
The parking assist monitor assists
the driver by displaying an image of
the view behind the vehicle while
backing up, for example while park-
ing.
Driving precautions
WARNING
●Never depend on the parking assist monitor entirely when backing up. The image and the position of the guide
lines displayed on the screen may dif- fer from the actual state.Use caution, just as you would when
backing up any vehicle.
●Be sure to back up slowly, depressing the brake pedal to control vehicle speed.
●If you seem likely to hit nearby vehicles, obstacles, people or mount the shoul-
der, depress the brake pedal to stop the vehicle.
●The instructions given are only guide-lines. When and how much to turn the
steering wheel will vary according to traffic conditions, road surface condi-tions, vehicle condition, etc. when
parking. It is necessary to be fully aware of this before using the parking assist system.
●When parking, be sure to check that
the parking space will accommodate your vehicle before maneuvering into it.
●Do not use the parking assist monitor
system in the following cases:
• On icy or slick road surfaces, or in
snow
• When using tire chains or emergency
tires
• When the trunk is not closed com-
pletely
• On roads that are not flat or straight, such as curves or slopes
●In low temperatures, the screen may darken or the image may become
faint. The image could distort when the vehicle is moving, or you may become unable to see the image on the screen.
Be sure to visually check all around the vehicle both directly and using the mir-rors before proceeding.
●If the tire sizes are changed, the posi-
tion of the guide lines displayed on the screen may change.
●The camera uses a special lens. The distances between objects and pedes-
trians that appear in the image dis- played on the screen will differ from the actual distances. ( P.182)