2018 Lexus LC500 lexus LC500 2018 Navigation Manual

9
-$@-$I@/BWJ@0.&@ &&

*2:LC500h
To use this system in the safest possible
manner, follow all the safety tips shown
below.
This system is intended to assist in
reaching the destination and, if used
properly, can do so. The driver is solely
responsible for the safe operation of
your vehicle and the safety of your pas-
sengers.
Do not use any feature of this system to
the extent it becomes a distraction and
prevents safe driving. The first priority
while driving should always be the safe
operation of the vehicle. While driving,
be sure to observe all traffic regula-
tions.
Prior to the actual use of this system,
learn how to use it and become thor-
oughly familiar with it. Read the entire
manual to make sure you understand
the system. Do not allow other people
to use this system until they have read
and understood the instructions in this
manual.
For your safety, some functions may
become inoperable when driving.
Unavailable screen buttons are
dimmed.
While driving, listen to the voice
instructions as much as possible and
glance at the screen briefly and only
when it is safe. However, do not totally
rely on voice guidance. Use it just for
reference. If the system cannot deter-
mine the current position correctly,
there is a possibility of incorrect, late,
or non-voice guidance.
The data in the system may occasion-
ally be incomplete. Road conditions,
including driving restrictions (no left
turns, street closures, etc.) frequently
change. Therefore, before following
any instructions from the system, look
to see whether the instruction can be
done safely and legally.
This system cannot warn about such
things as the safety of an area, condi-
tion of streets, and availability of emer-
gency services. If unsure about the
safety of an area, do not drive into it.
Under no circumstances is this system
a substitute for the driver’s personal
judgement.
Use this system only in locations where
it is legal to do so. Some areas may
have laws prohibiting the use of naviga-
tion screens next to the driver.
Safety instruction
WARNING
●Exercise extreme caution if operating the system while driving. Insufficient
attention to the road, traffic or weather conditions may cause an accident.
●While driving, be sure to obey the traf-fic regulations and maintain awareness
of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated
information such as the direction of a one way street.

10
-$@-$I@/BWJ@0.&@ &&

1
11
-$@-$I@/BWJ@0.&@ &&

1
Quick guide
Quick guide
1-1. Basic function
Display and operation switches 12
Remote Touch ................................. 14
Menu screen .................................... 16
Status icon ........................................ 18
“Setup” screen............................... 20
Information screen ........................ 21
1-2. Navigation operation
Operating the map screen ....... 22
Guiding the route ......................... 23
Registering home.......................... 24

12
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
1-1.Basic function
Microphone (P.168, 190)
Steering switches ( P.146, 168, 190)
Display
Audio control switch ( P.120)
Remote Touch ( P.14)
Touchpad ( P.28)
USB/AUX port ( P.122)
●When the temperature is -20°C (-4°F) or less, the navigation system may not operate.
●When the LCD screen is viewed at an angle, it looks lighter or darker.
●When light from the sun or another external light source strikes the screen,
the screen is difficult to see.
●When wearing sunglasses with polarized
lenses, the screen looks lighter or darker.
●The above illustration is for a left-hand
drive vehicle.
Display and operation switches
Names of each part
A
B
C
D
E
F
G

13
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
WARNING
●For safety reasons, drivers should avoid performing operations as much as possible while driving. Performing
operations while driving may cause the driver to mistakenly operate the steer-ing wheel, which may lead to an acci-
dent. Stop the vehicle before using. Furthermore, avoid looking at the screen as much as possible while driv-
ing.
●Always follow the actual traffic regula- tions and drive according to the road conditions. Routes displayed by the
destination guidance may include routes where the vehicle is prohibited from entering due to changes to speed
limit signs and routes where the road is too narrow to pass through.
NOTICE
●To prevent the 12-volt battery from becoming fully depleted, do not use
the remote touch for long periods of time while the engine/hybrid system is turned off.

14
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
“MAP” button
Press to display the current location. (P.65, 69)
“MENU” button
Press to display the menu screen. (P.16)
Back button
Press to display the previous screen. (P.28)
Touchpad
Operate to select/confirm a button on the screen. (P.28)
Operate to scroll list screens and enlarge/shrink the map. ( P.29)
Sub function button
When is displayed on the screen, a function screen assigned to the screen can be dis-
Remote Touch
The navigation system is primarily operated by the Remote Touch.
Remote Touch is the name for the de vice that includes the “MAP” button,
“MENU” button, back button, to uchpad and sub function button.
Names and operations of each part
A
B
C
D
E

15
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
played. (P.15)
Optional functions assigned to the
screen can be operated.
1 When the is displayed on the
screen, press the button on the
Remote Touch.
2 Select the desired item.
Using the sub function button

16
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Press the “MENU” button on the Remote Touch to display the menu screen.
Select to display the “Destination” screen. ( P.64)
Select to display the radio control screen. ( P.120)
Select to display the media control screen. ( P.120)
Select to display the hands-free control screen. ( P.188)
Select to display the “Apps” screen.*1, 2
Select to display the information screen. ( P.21)
Select to display the “Setup” screen. ( P.20)
Select to display the air conditioning control screen. *3
*1: This function is not made available on some models.
*2: For details about the functions and serv ices of this application, refer to
http://my.lexus.eu.
*3: Refer to the “OWNER’S MANUAL”
Moving the cursor over a switch on the menu screen causes shortcut switches to
display for that switch.
The shortcut switches can be used to perform operation procedures more quickly.
Menu screen
Menu screen operation
How to use “On cursor shortcut”
A
B
C
D
E
F
G
H