2016 Hyundai Sonata Car Multimedia System Manual

Starting/Ending and Setting Voice Recognition I 6-3
06
Starting/Ending and Setting
Voice Recognition
Starting Voice Recognition
Press the key briefly (less than 0.8
seconds) on the steering wheel control to
activate voice recognition.
Ending Voice Recognition
1. Select “Exit” to the left of the bottom to end voice recognition.
2. Press and hold (over 0.8 seconds) the
key on the steering wheel con-
trol to end voice recognition.
Quick Run of Voice
Recognition (Manual Mode)
Usually, you are supposed to say a com-
mand to execute the desired operation
after the voice guidance. However, it takes
a little time to wait for the voice guidance.
If you would like to activate the desired
operation more quickly, you can just touch
the commands displayed on the screen.
This feature is useful when you feel the
voice guidance is too long or voice com-
mands do not work as you desired.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

6-4 I Voice Recognition
Extending the Listening Time
When the system is waiting for your com-
mand, after the voice prompt and beep
have been heard, if you press the voice
recognition icon (shorter than 0.8 sec-
onds), then the beep will sound again and
standby mode will restart.
When activated, voice recognition waits for
your command for 5 seconds. If you say
nothing for 5 seconds, a voice prompt will
ask for your command again.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

Starting/Ending and Setting Voice Recognition I 6-5
06
Skipping Prompt Messages
When you hear the prompt message,
press the voice recognition icon on the
steering wheel remote control to skip the
message and go directly to

listening mode
to sa y your command.
This results in f

aster operation when
you feel the message is too long or you
already know the command to use.
Adjusting Voice
Recognition Volume
During voice recognition, rotate the vol-
ume knob to adjust the message volume.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

6-6 I Voice Recognition
Voice Recognition Screen
Overview
Start Screen
Help Display
NameDescription
Most
frequently
used
commands Displays the six most fre-
quently used commands.
Not
available
command Displays commands that
are not available due to
a failure in meeting the
conditions for using them
and thus need additional
settings. The conditions
required for using them
will be described briefly
under each command.
Name
Description
Voice
recognition
status icons Standby Voice guidance Voice command
process
User's
speaking
volume being
recognized Displays the voice
command volume in
real time.
Recognized
results Displays the voice rec-
ognition result.
Help
Displays all available
help commands in a
tree format.
Exit
Ends the voice recog-
nition.
Name
Description
Command
list
!Ÿ

Shows the available
commands.

!Ÿ
Select or say a com-
mand to display addi-
tional commands in
detail.
How to
use for
selected
item This section shows how to
use voice recognition for
the selected item.
How to
use in
general This section displays how
to use voice recognition in
general.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE





Voice Recognition Screen Overview I 6-7
06
Instructions for Using
Voic e R e cognit ioni Information
In the instructions screen, no voice is
recognized, so you m
ust manually issue
commands. Because the instructions screen
displays a lot of content, you can not view it
while driving for safety precautions.
Name Description
Detail
instruction This section describes
how to use voice recog-
nition in detail.
Close button
Closes the screen and
restarts voice recogni-
tion.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE





6-8 I Voice Recognition
Voice Commands
Types of Commands
Voice recognition commands are classified as "Global Commands"
and "Local Commands."
1. Global Commands ("J
): Commands that can be used immedi-
ately after activating voice recognition.
2. Local Commands (
!¹): Commands that can be used when a
multimedia, navigation, or Bluetooth call is running, or displayed
on the screen, after activating voice recognition.
Call Commands
* Check the following before using call commands :
1. Voice commands related to phone calls can be used after con- necting a Bluetooth device.
2. T

o call a person, for example “Call ” whose name
is listed in Contacts, you must first download the Contacts
list. For details on downloading contacts, see “Part 3. Using
Bluetooth > Chapter 3. Bluetooth Phone > 3.10 Contacts”.
3. After downloading the Bluetooth contacts, it will take some time to convert the Contacts into voice data during which time you
cannot make a call by name yet. The time it takes to convert
v oice data ma y v

ary depending on the number of Contacts
downloaded on the phone.
Command Operation
"J Call Displays downloaded Contacts, after this
you can make a call by saying the name.
"J Call You can directly call a person by
in the downloaded Contacts.
"J Call on
Mobile You can call a person directly to
the n
umber that is sa
v

ed as “Mobile” in
the downloaded Contacts.
e.g.) Call “John Smith” on Mobile
"J Call in
Office You can call a person directly to
the n
umber that is sa
v

ed as “Office” in the
downloaded Contacts.
e.g.) Call “John Smith” in Office
"J Call at
Home You can call a person directly to
the n
umber that is sa
v

ed as “Home” in the
downloaded Contacts.
e.g.) Call “John Smith” at Home
"J Call on
Other You can call a person directly to
the n
umber that is sa
v

ed as “Other” than
“Mobile, Home, or Office” in the down-
loaded Contacts.
e.g.) Call “John Smith” on Other
"J Dial Number Displays a screen where you can say a
phone number to dial.
"J Dial You can directly say the number to call.
e.g.) Dial 111 555 1234
"J Redial Directly calls at the number that you last
dialed.
"J Call History Displays your Call History, where you can
say the list number to make a call.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE





Voice Commands I 6-9
06
Navigation Commands
* Check the following before you use navigation commands :
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/ province and then look it up.
Find Address is classified by states/provinces to provide you with faster service.
2. Some commands such as “Cancel Route” are available only when the destination is fixed.
Command Operation
"J POIs Near
Destination Finds POIs near the destination.
After this command, you can find the name of
a location step-by-step.
"J
Near
Destination Find near the destination.
For details of , see “Find the
Nearest list”.
e.g.) “Banks” Near Destination
"J Map Moves to the current position on the naviga-
tion map
"J Previous
Points Displays a list combining Previous Destinations,
Previous Searches, and Previous Starting Points
all together.
You can then set a destination by saying the list
number.
"J Previous
Destinations Displays a list of recent destinations that you
can return to by saying the number in the list.
"J Previous
Searches Displays a list of recent searches, where you
can set a destination by saying the number in
the list.
"J Previous
Starting Points Displays a list of recent starting points that you
can return to by saying the number in the list.
"J Traffic
Information Moves to the Traffic Information menu screen.
"J Go Home Set the destination to your home.
Your home must first be set in the Navigation
system.
"J Go to Office Set the destination to your office/work.
Your office/work must first be set in the
Navigation system.
Command
Operation
"J Find Address
in
!Ÿ
Finds the address in and sets it as
the destination.
e.g.) Find Address in California
!Ÿ
To find an address, you should say "House
Number ª
Street ª
City" (in order, exclud-
ing the state).

e.g.) 300 (Three Zero Zero) Main Street, Almond
"J Find Address Finds the address and sets it as the destination.
"J Find the
Nearest POI Find the nearest points of interest from your
current location.
After this command, you can find the name of
a location step-by-step.
"J Find the
Nearest
Immediately finds nearest to your
location.
For details of , see “Find the
Nearest list”.
e.g.) Find the Nearest
“Parking”
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE


 

6-10 I Voice Recognition
CommandOperation
"J Hospital Displays a list of the nearest hospitals.
You can then set a destination by saying the
list number.
"J Dealership Displays a list of the nearest car dealerships.
You can then set a destination by saying the
list number.
"J Road
Assistance Displays a list of the nearest road assistance
locations.
You can then set a destination by saying the
list number.
"J Show Route Displays a map overview of the entire route
to your destination.Command
Operation
"J Turn Guidance
On Turns on the voice guidance system.
"J Turn Guidance
Off Turns off the voice guidance system.
"J Zoom All the
Way Out Zooms out from the navigation map to the
fullest.
"J Zoom All the
Way In Zooms in on the navigation map to the fullest.
"J Cancel Route Cancels the route to the fixed destination and
exits guidance.
"J Destination
Information Tells you the remaining distance and time to
your destination.
"J Route Options Restarts the route to your destination.You can
then select either “Faster Time” or “Shorter
Distance”.
"J Find Faster
Time Route Starts a new route to your destination that will
take the least amount of time.
"J Find Shorter
Distance
Route Starts a new route to your destination that will
use the shortest distance.
"J Emergency
Services Displays a list of nearest Police Station,
Hospital, Dealership, or Road Assistance.
You can then set a destination by saying the
list number.
"J Police Station Displays a list of the nearest police stations.
You can then set a destination by saying the
list number.
)@-'.:@(<64"@/>
1BSUJOEE


 )@-'.:@(<64"@/>
1BSUJOEE