Instruments and indicator lights
-The engine compartment of any motor vehi
cle is a potentially hazardous area. Before
you check anything in the engine compart ment, stop the engine and let it cool down.
Always exercise extreme ca ution when work
ing under the hood
c:> page 218.
Overview
Some ind icator lights turn on briefly to chec k the
function of that system whe n you swi tch the ign i
t ion o n. These systems are m ark ed w it h a ../ in
t he fo llowing tables . If one of these indi cator
lights does not tu rn on, there is a malfunction in
that system .
Red indicator lights
12
-------------
US A models :
Brake malfunction ../
c:> page
14
Canada mod els :
Bra ke m alfunction ../
r::!> page
14
USA mod els :
Elect romechan ica l par king brake
r::!>page
15
Canada models:
Electromechan ica l park ing brake
c:>page
15
E ng ine cooling system
r::!> page
15
Eng ine oi l pressure
r::!> page
16
E ng ine o il level
r::!> page
17
Battery
c:> page
16
Eng ine stops while dr iving
r::!> page
16
Safety belt
c:>page
16
Elect romechan ica l steering ../
c:> page
192
Electronic steering column lock
r::!> page
17
Engine sta rt system
r::!> page
17
USA models: Speed warning sys
tem r::!> page
82
Canada model s: Speed warni ng
system
r::!> page
82
Adaptive cruise contro l*../
r::!> page
87
Air suspension *
r::!> page
17
Night vision assistant*
i=> page
104
Night vision assistant *
i=> page
104
Rear spo iler
i=> page
193
Refill Ad Blue*
i=>page
214
AdBl ue malfunction*
c:> page
214
Yellow indicator light s
-------------
US A models: Safety systems
i=> page
18
Canada models: Safety systems
i=> page
18
Electronic Stabi lizatio n Control
(ESC) ../
c:> page
18
Elec tronic Stab ilizati on Con trol
( E SC) ../
i=> page
18
USA models:
Anti-lock braking system (ABS)
defective ../
c:>page
19
Canada models:
Anti -lock braking system (ABS)
defective ../
c:> page
19
Worn brake pads
i=> page
19
Instruments and indicator lights
D
Adaptive cruise contro l*
¢ page 87
Adaptive c ruise control *
¢page 87
Audi act ive lane assist*
¢ pag e 95
Start-S top-Sys tem*
c::> page80
Start-Stop-System*
c::>page80
High beam assist*
c::>page44
High beam
c::>page44
BRAKE /((JJ Brake system
The light illum inates when the ignition is switch
ed on .
It goes out after the engine has been
started. This indicates t hat the brake war ning
light is f unct ion ing properly.
If th e brak e warning light do es not light up
when the engine i s cranking, th ere may be a
malfun ction in th e elec trical sy stem . In thi s
c ase , conta ct your Audi deal er.
If the brake system warning/indicator light turns
on, there is a brake system malfunction .
1111 (USA models )8 (Canada models) Stop
v ehicle and check brak e fluid l eve l
If the indicator light t urns on and the message
appears, proceed as follows:
.. Pull
off the road .
.. Stop the vehicle .
.. Turn
off the engine.
.. Check the brake fluid level
c::> page 227 .
.. Contact your nearest authori zed repa ir facility if
necessary .
Warning! Fault in brake system. Contact dealer
If th e ABS indicato r light fll1J (U SA mode ls)/ ¢e 'A
(Canada models), the ESC indicator light DJ and
the brake system indicator lig ht
1111 (USA mod
els)/ . (Canada models) turn on and the mes-
14
sage appears, the ABS, ESC and braking dis tribu
tion are not working
¢ .&. .
Carefully drive to your author ized Audi de aler im
med iate ly to have the malfunc tion corrected
c::> &, .
1111 (USA models )/. (Canada models ) Park
ing brake : system f ault! Ple ase contact dealer
- If the ind icator light and the message appea r
when stationar y or after switching the igni
ti on on ,
check if you can release the pa rking
br ak e. After releasing the par king brake, care
fully drive to your author ized Audi dealer im
mediately to have the ma lf u nction corrected. If
you cannot release the parking bra ke, seek pro
fessiona l assistance .
- If the ind icator light and the message appear
while d riv ing , the eme rgency braking function
may not be avai lab le . It may not be possib le to
set the park ing brake or re lease it once it has
been set . Seek professiona l assistance.
(USA mode ls): If th e warning light
1111 and the
warning light
IJ appear together, immediately
contact your autho riz ed Audi dealer or qualif ied
workshop to have all brake pads inspected
c::> page 19.
When the light comes on, a n audible warning sig
nal is also given.
A WARNING
- Always observe the warn ings in
c::> page 218, before opening the hood and
checking the brake flu id.
- Dr iving with low brake f luid is a safety haz
ard. Stop the car and get professional assis
tance .
- If the
1111 (USA models) 8 (Canada mod
els) brake system indicato r light turns on to
gethe r with the ABS and ESC indicator
lights, the ABS/ESC regulat ing funct ion may
have fai le d . Fu nctions t hat stabili ze t he ve
hicle are no longe r avai lable. This could
cause t he ve hicl e to swe rve and inc rease the
ris k of sli ding. Drive carefully to the nearest
author ized Audi dealer or other qualified ..,.
Instruments and indicator lights
Drive to an authorized Aud i dea ler or authorized
Audi Service Faci lity immediately to have the
malfunct ion corrected .
II Air suspen sion : Vehicle too low Ground
clearance reduced
The gro und clea rance is very low due to a system
malfunct io n. Wait unt il t he air suspension sys
tem has res tored norma l ground clearance. Oth
erwise, conditions such as an uneven road sur
face can lead to vehicle damage .
~/ !f Safety systems
The JI (USA models)/ E,I (Canada mode ls) indi
cator light monitors the safety systems (e.g. air
bags, pretensioners) and illuminates for a few
seconds each time you switch the ignition on .
If the
r.l (USA models)/ E,I (Canada models) in
d icator light does not go out, or if it illum inates
while you are driving, or if it starts to blink, the n
there is a malfunction somewhe re in the system .
If the light does not ill uminate w hen you switch
the ign ition on , this also means the re is a mal
function .
.&, WARNING
-
If you have a mal func tion in the safety sys
t ems, contact your authorized A udi dealer im
mediately . Othe rwise the safety systems may
not work properly in an acci dent .
& Brake booster
U Brake servo : limited functional ity . You can
con tinue d riv ing. Con tact workshop
There is a malfunction in the brake booster. The
brake booster is availab le, but its effectiveness is
red uced. Braking behavior may be different from
how it normally functions and the brake peda l
may vibra te.
Drive to an a uthorized Audi dea ler or a uthorized
Aud i Service Fac ility immediately to have the
malfunct ion corrected.
18
r;. I[/; Electronic Stabilization Control (ESC)
If the ffl ind icator light blinks while driving , the
E S P or ASR (ant i-slip reg ulation) is act ively reg u
l ati ng .
If the
ffl ind icator light turns on, the system has
switched the ESC
off . In this case, you can switch
t h e ign it io n
off and t hen on to sw itch the ESC on
again. The indica tor ligh t turns
off when the sys
tem is functioning fu lly.
If the . indicator light tu rns on, ESC was
swi tched
off using the I~ OFF I bu tto n
~page 188 .
Stabilization control (ESC /ABS ) malfunction!
See owner' s manual
If the DJ ind icator light and the ABS indicator
li ght
fn:) (USA models) ;ti] (Canada models)
turn o n and the message appears, the ABS or
e lectronic differe ntia l lock is malfunc tioning. This
also ca uses the ESC to mal function. The br akes
sti ll fu nct ion with their no rma l powe r, b ut ABS is
not active.
D rive to your au thori zed A udi dealer or qualified
workshop immedia tely to have the mal func tion
corrected .
.&, WARNING
If the 1111 (USA models) ;II (Canada mod
e ls) b rake system indicator light turns on to
gether with the ABS and ESC ind icator lights,
the ABS/ESC regulat ing funct ion may have
failed. Functions that stabilize the vehicle are
n o longer availab le. This could cause the vehi
cle to swerve and increase the risk of slidi ng.
D rive ca refully to the nea rest authorized Audi
dealer o r othe r qualified workshop and have
the ma lf unc tion correc ted.
(D Tips
Fo r additional informat ion on ESC and ABS,
r efer to
~ pag e 188.
M N <( (.J
'SI: ,...., \!) 1.1'1
N \!) ,....,
ABS/(@)) Anti-lock braking system (ABS )
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL) .
The warning/indicator light
,n:) (USA models) /
ill (Canada models) will come on for a few sec
onds when the ignition is switched on. The light
will go out after an automatic check sequence is
completed.
There is a malfunction in the ABS when:
-The warning/indicator light does not illuminate
when you switch the ign it ion on.
- The warning/indicator light does not go out af
ter a few seconds.
- The warning/indicator light illuminates while driving .
The ESC indicator light also illuminates if there is
a ma lfunction in the ABS . The message
Stabiliza
tion control (ESC/ABS): Fault! See owner's man
ual
also appears in the instrument cluster display
and a warning tone sounds.
The brake system will still respond even with
out the assistance of the ABS system. See your
authorized Audi dealer as soon as possible to re
store full braking performance.
For more infor
mat ion regarding the ABS ¢page 188.
Malfunction in the brake system
If the brake warning light¢ page 14 and the ABS
warn ing illuminate together there may be a mal
function in the ABS, and there may also be a mal
function in the brake system itself¢,& .
The ABS
will not work and you will notice a change in
braking response and performance.
In the event of a malfunct ion in the brake sys
tem
the warning/indicator light 1111 (USA mod
els)/. (Canada models) in the instrument clus
ter flashes ¢ page 14 .
Malfunction in the electronic differential
lock (EDL)
The ED L works together with the ABS . The ABS
warn ing light will come on if there is a malfunc
tion in the EDL system
c::> page 188 . See your au
thorized Audi dealer as soon as possible.
Instruments and indicator lights
A WARNING
-If the ,n:) (USA mode ls)/ ill (Canada mod
els) warn ing light does not go out, or if it
comes on while dr iv ing, the ABS system is
not working prope rly . The vehicle can then
be stopped only with the standard brakes
(without ABS) . You will not have the protec
tion ABS provides. Contact your Audi dealer
as soon as possible .
- USA models: If the
1111 warning light, the
G1 warning light and the ,n:) warning light
come on together, the rear wheels could
lock up first under hard braking . Rear wheel
lock-up can cause loss of vehicle control and
an accident. Have your vehicle repaired im
mediately by your author ized Audi dealer or
a qualified workshop . Dr ive slowly and avoid
sudden, hard brake applications .
- Canada models: If the brake warning light
• • the
DJ warning light and the ABS warn
ing light
ill come on together, the rear
wheels could lock up first under hard brak
ing. Rear wheel lock-up can cause loss o f ve
hicle control and an accident . Have your ve
hicle repaired immediately by your author
ized Audi dealer or a qualified workshop.
Drive s low ly and avoid sudden, hard brake
applications.
{0) Worn brake pads
EiJ Brake pads!
-
If the warning light i lluminates, immed iate ly
contact your authorized Audi dealer or qualified
workshop to have all brake pads inspected. On
USA models the warning light
EiJ comes on to
gether w ith the warning light
1111 . Both sets of
brake pads on an axle must always be replaced at
the same time .
A WARNING
Driving with bad b rakes can cause a collision
and serious personal injury .
-
19
M N <( I.J "". rl I.O
"' N I.O rl
Driver information
system
Overview
Fig. 4 Driver information system in th e instr ument cluster
Fig. 5 Display: example of the informat ion line
The driver information system conta ins informa
tion @ that is disp layed on tabs@¢
fig. 4 . The
following content is possible depending on vehi
cle equipment:
@
®
Tab C o ntent
1 Veh icle functions:
On-board computer ¢ page 24
Efficiency program* ¢ page 25
Digital speedometer
Cruise control *¢
page 83
Adapt ive cruise control and braking
guard*
¢ page85
Audi active lane assist*¢ page 94
Display darkened Ins
trument s and indi cator ligh ts
@
®
Tab Content
2 Ind icator lights and messages
Warning when a door, the hood or the rear lid is not closed
Service interval display¢
page 26
Speed warning system ¢ page 82
3 Night vision assistant* ¢page 104
4 Audio/video
s Telephone*
6 Navigat ion*
T he second and third tabs are only visible if at
least one indicator light or message is shown or if
that system is switched on.
The status line© is located in the bottom part of
the display ¢
fig. 4. It displays the exterior tem
perature, time, selector lever position, tripod
ometer and odometer .
For some vehicle functions, you can access the
trip information from the temporary memory
¢ page 25 in the line(!)¢ fig. 5.
_& WARNING
-
-Never rely exclusively on the outside tem
perature display to determine if a road sur
face is icy or not. Keep in mind that road sur
faces, especially bridges and overpasses,
could be ice covered and slippery even at an
outside temperatu re above 4 1 °F (+S
0
().
- Always remember, even if the "snowflake"
symbol (ice warning) does not appear in the
d isp lay, black ice cou ld be on the road.
- Always reduce your speed and drive with
specia l care in cold weather cond itions when
the chance of encountering icy road surfaces
i n creases.
(0 Tips
- If the vehicle is stationary, or if you are driv
ing at a very low speed, the temperature
shown in the display might be slight ly high
er than the actual outside temperature. This
is caused by the heat being radi ated from
the engine . .,..
23
Instruments and indicator Lights
- You can se lect the un its used for tempera
ture, speed an d other meas urements in the
M MI.
- For informat ion on the a udio/video and nav
i gat io n* functions, refe r to t he se parate
M MI owner's manual.
Operation
The driver information system is operated using
th e buttons on the multifunction steering wheel .
Fig . 6 Mult ifu nctio n stee ring w hee l: operat ing t he drive r
i nforma tio n syste m
Fig. 7 In stru ment cluster: call in g up t he ve hicle fu nctio ns
men u
Operat ing
.,. Switc h the ignition on .
.. To sw itch between the tabs, p ress the rocker
switc h @ to the left or right ¢
fig. 6 .
.,. To access addi tio nal i nfo rmat io n be low or
above , turn the thum bwhee l@ dow n or u p.
.. To confirm a se lection, press the thumbwhee l
@.
.. To ope n the s ubme nu for an active ta b, press
the button ~@-
....
-N 9 (!:I .,. OJ
.,. To select a function programmed to a steering
whee l button*, press the button@.
24
Opening the Vehicle functions
.,. Sele ct the first t ab with the ro cker swi tch@ .
.. Press th e ~ button @. T he
Vehicle functions
menu is disp laye d ¢ fig . 7 .
.,. To se lect a menu item, tu rn and press the
thumbwhee l@ .
Resetting values to zero
.,. In t he Vehicle fun ctions me nu, sele ct On-bo ard
computer
o r Efficiency program.
.,. Yo u can now select between the long-term
memory and short-term memory .
.,. To reset the values in a memory, press and hold
the t humbwheel @for one second .
Assigning a function to a programmable
steering wheel button*
.,. Select the I CAR I funct ion button > (Car )* Sys
tems
control b utt on > Vehicle settings > Steer
ing wheel button programming .
The last function selected displays when you
switch the ig nition on .
On-board computer
Fig. 8 In stru men t cluster: fuel cons ump tio n
You can ca ll up the followi ng i nfo rmation in the
on-board comp uter :
- Da te
- Dr iv ing t ime (h) fro m the short-te rm memory
- Av erage cons umption in MPG ( l/100 km) from
t he sho rt-term memo ry
- Average spee d in mph (km/h) fro m the short
term m emory
- Distance drive n in miles (km) from the shor t
term memory
- Cur rent fue l consumption in MPG ( l/100 km)
Driving
made a full brake application . ESC and the as·
soc iated components (ABS, ASR, EDL) cannot
overcome the laws of physics. In corners and
when road or weather conditions a re bad, a
full b rake app lication can cause the vehicle to
skid or the rea r end to break away, wh ich in·
c reases the risk of an acc ident.
Start-Stop-System
Description
Applies to vehicles: with Sta rt-Stop-System
The Start-Stop-System can he lp increase fue l
economy and red uce CO2 emissions.
I n Start -Stop mode, the eng ine shuts
off auto
matica lly w hen the vehicle is stopped, such as at
a traffic light. The ign ition remains sw itched on
during this stop phase . The engine w ill restart
automatically when needed .
The Start-Stop-System is automatically activated
each time you switch on the ignition.
Basic requirements for Start -Stop mode
- T he driver's door is closed.
- T he driver' seat be lt is lat ched .
- The hood is closed .
- The vehicle must have been dr iven faster than
2.5 mph (4 km/h) s ince the last stop.
- A trai ler is not hitched to the vehicle .
(D Note
Always switch the Start-Stop-System off when
driving through water <=>
page 80.
@ Tips
The engine stops shortly before the vehicle
comes to a stop
1>. The fu ll function of the
brake booster and the power steering is sti ll
available.
l l de pend ing on eng in e
80
Stopping/starting the engine
Applies to vehicles: with Start-Stop-System
Fi g. 8 4 Instrument cl uste r: en gin e stopped (stop phase)
.,. Brake the vehicle to a stop. The eng ine will be
sw itched
off shortly before the vehicle comes
to a standst ill or when the veh icle is station
ary 1>. Keep your foot on the b rake peda l. The
[I] indi cato r light appears in the info rmat ion
line a t the bottom of the inst rument cl uster
disp lay. The needle in the tachometer a lso
moves into the READY positio n.
.,. The engine starts again when you take your
foot
off the brake peda l. The indicator light
turns
off.
Additional information
The engine stops in the P, N and D selector lever
pos itions.
If you se lect the R posit io n du ring a stop phase,
the e ngine will star t aga in .
Sh ift to P qu ickly to prevent the engine from
starting unintentionally when shift ing th rough R.
You can determine for yourself if the engine will
stop or not by reducing or increas ing the amount
of force you use to p ress the brake pedal. For ex
ample, if yo u only lightly press on t he b rake ped
al in s top-and and-go traffic o r when tur ning, the
engine w ill no t sw itch
off when the vehi cle is sta
tiona ry . As soon as you press the b rake down
harder, the eng ine will sw itch
off.
(D Tips
- Press the bra ke peda l during a S top phase
to keep the vehi cle from rolling.
Driving safety
-Never place or install floor mats or other
floor coverings on top of already installed
floor mats. Additional floor mats and other coverings will reduce the size of the pedal
area and interfere with the pedals .
- Always properly reinstall and secure floor
mats that have been taken out for cleaning .
- Always make sure that objects cannot fall
into the driver footwell while the vehicle is
moving . Objects can become trapped under
the brake pedal and accelerator pedal caus ing a loss of veh icle control.
Storing cargo correctly
Loading the luggage compartment
All luggage and other objects must be properly
stowed and secured in the luggage compart
ment.
Loose items in the luggage compartment can
shift suddenly, changing vehicle handling charac
teristics. Loose items can also increase the risk of
serious personal injury in a sudden vehicle ma
neuver or in a collision.
.. Distribute the load evenly in the luggage com
partment.
.. Always place and properly secure heavy items in
the luggage compartment as far forward as
possible.
.. Secure luggage using the tie-downs provided
¢ page 63, Luggage compartment.
.,. Make sure that the rear seatback is securely
latched in place .
_& WARNING
Improperly stored luggage or other items can
fly through the vehicle causing serious per
sonal injury in the event of hard braking or an
accident. To help reduce the risk of serious
personal injury:
- Always put objects, for example, luggage or
other heavy items in the luggage compart
ment.
- Always secure objects in the luggage com
partment using the tie-down hooks and
suitable straps.
132
_& WARNING ~ -
Heavy loads will influence the way your vehi
cle handles. To help reduce the r isk of a loss
of control leading to serious personal injury:
- Always keep in mind when transporting
heavy objects, that a change in the center of
gravity can also cause changes in vehicle
handling:
- Always distribute the load as evenly as
possible .
- Place heavy objects as far forward in the luggage compartment as possible.
- Never exceed the Gross Axle Weight Rating
or the Gross Vehicle Weight Rating specified
on the safety compliance sticker on the left
door jamb. Exceeding permissible weight
standards can cause the vehicle to slide and
handle differently .
- Please observe information on safe driving
¢page 126.
_& WARNING
To help prevent poisonous exhaust gas from
being drawn into the vehicle, always keep the
rear lid closed wh ile driving .
- Never transport objects larger than those
fitting completely into the luggage area be
cause the rear lid cannot be fully closed .
- If you absolutely must drive with the rear lid open, observe the following notes to reduce
the risk of poisoning:
- Close all windows,
- Close the power roof*,
- Open all a ir outlets in the instrument pan-
el,
- Switch off the air rec irculat ion,
- Set the fresh air fan to the highest speed.
_& WARNING
Always make sure that the doors, all windows,
the power roof* and the rear lid are securely
closed and locked to reduce the risk of injury
when the vehicle is not be ing used.
- After closing the rear lid, always make sure
-
that it is properly closed and locked. ~