2016 AUDI A7 oil viscosity

M N <( (.J
'SI: ,...., \!) 1.1"1
N \!) ,....,
Audi oil quality standard
G as oli ne
VW 502 00 or
engi ne vw 504 00
Diese l vw 507 00
eng in e
Using the proper engine o il is important for the
functiona lity and service life of the engine. Your
engine was factory-fi lled with a high-quality oil
which can usually be used throughout the entire
year.
@ Note
Your L imited New Vehicle Warranty does not
cover damage or malfunctions due to failure
to follow recommended maintenance and use
req uirements as set forth in the Audi Owner's
Manual and Warranty
& Maintenance booklet.
- Use only a high quality eng ine oil that ex-
pressly complies w ith the Audi o il quality
standard specified for your veh icle's engine.
Using any other oil can cause serious engine
damage .
- Do not mix any lubricants or other additives
into the engine oil. Doing so can cause en­
gine damage.
(D Tips
If you need to add oil and there is none availa­
ble that meets the Audi o il quality standard
your eng ine requires, you may add a total of
no more than 0.5 quart/liter of a high-quality
"synthet ic"oil that meets t he followi ng speci­
fications.
- Vehicles with gaso line engine: ACEA A3 or
API SM with a viscosity g rade of SAE OW-30,
SAE SW-30 or SAE SW-40.
- Vehicles with diesel engine: AC EA C3 or
API CF with a v iscosi ty grade of SA E OW -30
or SA E SW-30.
- For more information abo ut eng ine oil that
has been approved for your vehicle, please
contact e ither your a uthorized Audi dea ler
or A udi Customer Relations at
1 (800) 822-2834 or visit our web site at
www.audiusa.com or www.aud icanada.ca.
Checking and Fillin g
Engine oil consumption
The engine in your vehicle depends on on ade­
quate amount of oil to lubricate and cool oil of
its moving ports.
In order to provide effective lubricat ion and cool­
i ng of internal engine components, all internal
combust ion eng ines consume a certain amount
of oil. Oil consumpt io n varies from eng ine to en­
gine and may change sign ificantly over the life of
the engine. Typi cally, engines wi th a specified
break -in period (see
¢ page 196) consume more
o il during the b reak-in period than they consume
after oil consumption has stabilized .
Under normal cond itions, the rate of oil con­
sumption depends on the quality and viscos ity of
the oil, the RPM (revolutions per min ute) at
which the engine is operated, the ambient tem­
perature and road conditions. Further factors are
the amount of oil dilution from water condensa­
t ion or fuel residue and the ox idation level of the
o il. As any engine is subject to wear as mileage
builds up, the oil consumption may increase over
t ime unt il replacement of worn components may
become necessary.
With all these variables coming into play, no
standard rate of oil consumpt ion can be estab­
lished or spec ified . There is no alte rnative to reg­
u la r and freq uent checking of the oil level, see
Note .
If the yellow engine o il leve l warning symbo l in
the instrument cluster
Ill li ghts up, you should
che ck the o il level as soon as possible
¢ page 222. Top off the oil at your earliest con­
venience
¢ page 222.
A WARNING
--=-
Before you check anythi ng i n the engine com-
partment, always read and heed a ll WARN­
INGS
¢ &. in Working in the engine comport­
ment on page 218.
(D Note
Driving wit h an insufficient oil level is likely to
cause severe damage to the engine.
IJJ,,
221