2016 AUDI A7 instrument cluster

Instruments and indicator Lights
Instruments and indicator Lights
Instruments
Instrument cluster overview
The instrument cluster is the central information center for the driver.
F ig. 3 In str ument cluster ove rview
CD Eng ine coolant temperature gauge 10
@ Ta chome ter . . . . . . . . . . . . . . . . . . 11
- with status indicator
OFF . . . . . 75
- with status indicator
READY . . . 80
@ Turn signa ls . . . . . . . . . . . . . . . . . . 44
© Disp lay with
- Drive r informat io n system . . . . . 23
- Indicator lig hts . . . . . . . . . . . . . 11
® Tachometer
@ Fue l level . . . . . . . . . . . . . . . . . . . . 11
a) Tips
The instr ument ill umination for the needles
and dia ls t urns on when the ignition is turned
on and t he lights are turne d off. T he ill umina­
t ion fo r the d ia ls reduces autom atic ally and
eventually tu rns off as brig htn ess outs ide in ­
creases. Th is function remi nds the driver to
t u rn the headlig hts on at the appropriate
time.
Engine coolant temperature gauge
The engine coo lant gauge CD i=;, page 10, fig. 3
only works when the ign ition is on. To prevent
10
damage to your engine, please note the follow­
i ng important poi nts :
Engin e cold
If only the LEDs at the bottom of the gauge t urn
on, the engine has not reached operating tem­
perature yet. Avoid high engine speeds, heavy en­
gine loads and heavy thrott le app lications.
No rmal temperatu re
The eng ine has reac hed its operating tempera­
ture once the LEDs up to the center of the ga uge
turn on under normal driving conditions. The
LEDs higher up may turn on when the eng ine is
under heavy load or the exterior temperature is
high . This is no need to worry as long as the.
warning light in the instrument clus ter does not
ill uminat e. If the L EDs in the uppe r area of the
display and the in dicator light . in the inst ru ­
men t cluster d isp lay tur n on, the coo lant tempe r­
atu re is too hig h
i=;,page 15.
A WARNING
- Always observe t he warn ing in ~ page 218,
befo re open ing t he hood and checking the
engine coolant level.

M N <( (.J
'SI: ,...., \!) ..,.,
N \!) ,....,
-Never open the engine hood if you see or
hear steam, or if you see engine coolant
dripping from the engine compartment. You
could burn yourself. Let the engine cool off
first until you can no longer see or hear steam or coolant escap ing .
Q) Note
-Mounting additional lights or accessories in
front of the air inlets reduces the cooling ef­
fect of the radiator. At h igh outside temper­
atures or high engine load, the eng ine could
overheat.
- The front spo iler has been designed to prop­
erly distribute the cooling air when the veh i­
cle is moving. If the spoiler is damaged, this
could reduce the cooling effect and the en­
gine could then overheat. Ask your author­
ized Audi dealer for assistance.
Tachometer
The tachometer displays the engine speed in rev­
olutions per minute (RPM).
You shou ld shift to the next lowest gear when the
speed is below 1500 RPM . The beginn ing of the
red zone in the tachometer indicates the maxi­
mum permissible engine speed for all gears once
the engine has been broken in and when it is
warmed up to operating temperature. Before reaching the red zone, you should shift into the
next h igher gear, choose the Dor S selector lever
position, or remove your foot from the accelera­
tor pedal.
CD Note
The tachometer needle© c::> page 10, fig. 3
should only be in the red zone briefly: other­
w ise, this increases the risk of engine dam-
age. The location where the red zone beg ins
varies depend ing on the eng ine.
@, For the sake of the environment
Upshift ing early helps you to save fuel and re­
duce operating noise.
In strum ent s a nd indicato r li ghts
Fuel level
The fue l gauge only works when the ignition is
on. If the fue l level drops below 2.6 gallons (10
liters), the bottom LED turns red and the indica­
tor light
t]J turns on c::> page 21. The bottom
LED blinks red when the fuel leve l is very low .
T he possible range based on the current f uel lev­
el is shown in tab@c::>
page 23, fig . 4 .
For the tank capacity in your veh icle, refer to the
T echnical Data c::>
page 2 72.
CD Note
Never drive until the tank is completely emp­
ty. The irregular supply of fue l that resu lts
from t hat can cause the eng ine to misfire. Un­
combusted fuel w il l then enter the exhaust
system . This can cause overheat ing and dam­
age to the catalytic converter.
Indicator lights
Description
The ind icator lights in the instrument cluster
blink or turn on. They indicate funct ions or ma l­
funct ions c::>
.&,.
Messages may appear with some indicator lights .
A warn ing s ignal will sound at the same time.
T he ind icator lights and messages in the cente r
of the displays may be replaced by other d isplays .
T o show them again, se lect the tab for ind icator
lights and messages using the m ultifunction
steering wheel c::>
page 23. If there are several
malfunctions, you can display them one at a time
using the thumbwheel.
Some indicators lights in the display can turn on
in several colors.
A WARNING
- Failure to heed warning lights and other im­
portant veh icle information may result in
serious personal injury or veh icle damage.
- Whenever stalled or stopped for repair,
move the vehicle a safe d istance off the
road, stop the engine, and turn on the emer-
gency flasher c::>
page 46. .,,.
11

M N <( (.J
'SI: ,...., \!) 1.1'1
N \!) ,....,
ABS/(@)) Anti-lock braking system (ABS )
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL) .
The warning/indicator light
,n:) (USA models) /
ill (Canada models) will come on for a few sec­
onds when the ignition is switched on. The light
will go out after an automatic check sequence is
completed.
There is a malfunction in the ABS when:
-The warning/indicator light does not illuminate
when you switch the ign it ion on.
- The warning/indicator light does not go out af­
ter a few seconds.
- The warning/indicator light illuminates while driving .
The ESC indicator light also illuminates if there is
a ma lfunction in the ABS . The message
Stabiliza­
tion control (ESC/ABS): Fault! See owner's man­
ual
also appears in the instrument cluster display
and a warning tone sounds.
The brake system will still respond even with­
out the assistance of the ABS system. See your
authorized Audi dealer as soon as possible to re­
store full braking performance.
For more infor­
mat ion regarding the ABS ¢page 188.
Malfunction in the brake system
If the brake warning light¢ page 14 and the ABS
warn ing illuminate together there may be a mal­
function in the ABS, and there may also be a mal­
function in the brake system itself¢,& .
The ABS
will not work and you will notice a change in
braking response and performance.
In the event of a malfunct ion in the brake sys­
tem
the warning/indicator light 1111 (USA mod­
els)/. (Canada models) in the instrument clus­
ter flashes ¢ page 14 .
Malfunction in the electronic differential
lock (EDL)
The ED L works together with the ABS . The ABS
warn ing light will come on if there is a malfunc­
tion in the EDL system
c::> page 188 . See your au­
thorized Audi dealer as soon as possible.
Instruments and indicator lights
A WARNING
-If the ,n:) (USA mode ls)/ ill (Canada mod­
els) warn ing light does not go out, or if it
comes on while dr iv ing, the ABS system is
not working prope rly . The vehicle can then
be stopped only with the standard brakes
(without ABS) . You will not have the protec­
tion ABS provides. Contact your Audi dealer
as soon as possible .
- USA models: If the
1111 warning light, the
G1 warning light and the ,n:) warning light
come on together, the rear wheels could
lock up first under hard braking . Rear wheel
lock-up can cause loss of vehicle control and
an accident. Have your vehicle repaired im­
mediately by your author ized Audi dealer or
a qualified workshop . Dr ive slowly and avoid
sudden, hard brake applications .
- Canada models: If the brake warning light
• • the
DJ warning light and the ABS warn­
ing light
ill come on together, the rear
wheels could lock up first under hard brak­
ing. Rear wheel lock-up can cause loss o f ve ­
hicle control and an accident . Have your ve­
hicle repaired immediately by your author­
ized Audi dealer or a qualified workshop.
Drive s low ly and avoid sudden, hard brake
applications.
{0) Worn brake pads
EiJ Brake pads!
-
If the warning light i lluminates, immed iate ly
contact your authorized Audi dealer or qualified
workshop to have all brake pads inspected. On
USA models the warning light
EiJ comes on to­
gether w ith the warning light
1111 . Both sets of
brake pads on an axle must always be replaced at
the same time .
A WARNING
Driving with bad b rakes can cause a collision
and serious personal injury .
-
19

Instruments and indicator lights
-If the warning light EiJ and the warning
light
11111 ) with the message Brake pads!
comes on in the instrument cluster display,
immediately contact your authorized Audi
dealer or qualified workshop to have all
brake pads checked or replaced if necessary.
EPC Electronic power control
Applies to vehicles: w ith gaso line engine
This warning/indicator ligh t monitors the elec­
tronic power control .
The (m warning/indicator light (Electronic Powe r
Control) illuminates when you switch the ignition
on as a function check.
{!) Tips
If this warning/indicator light illuminates
while you are driving, then there is a malfunc­
tion in the engine electronics. Have the mal­
function corrected as soon as possible by your
authorized Audi dealer or qualified repair fa­
cility.
W Glow plug system
App lies to vehicles: with diesel engine
The control light illuminates when the glow plug
system is active.
If the El indicator light illuminates, the glow
plug system is active . You should start the engine
immediate ly after the indicator light switches off.
The indicator light only illuminates for approxi­
mately 1 second if the engine is warm or if the
outside temperature is above 46 QF (8 QC).
@ Tips
-If the glow plug indicator light illuminates
while driving, there is an engine control
malfunction. The engine should be checked
immediately.
- If the indicator light does not illuminate at
all when switching the ignition on, there may be a malfunction in the glow plug sys­
tem. The engine should be checked.
l) - : USA mo dels onl y
20
o Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (MIL) is part of
the On-Board Diagnostic (OBD II) system. The symbol
('4 lights up when the ignition is switch­
ed on and will turn off after the engine has start­
ed and has settled at a constant idle speed . This
indicates that the MIL is working properly.
The warning light illuminates when there is a
malfunction in the engine electronic system.
Contact your authorized Audi dealer and have the
malfunction corrected.
An improperly closed fuel filler cap may also
cause the MIL light to illuminate
¢ page 212.
For more information ¢ page 28.
~ Diesel particulate filter
Applies to vehicles: with diese l engine and diesel particulate
filter
II Particulate filter: System fault See owner's
manual
The diesel particulate fil ter requires regenera­
tion . To support the filter's self -cleaning func­
tion:
Drive for approximately 15 minutes with these­
lector lever in the S position at a minimum speed
of 37 mph (60 km/h) and an engine speed of ap ­
proximately 2,000 RPM . The temperature in­
crease that will result from this can burn off the
soot in the filter . T he symbol will switch off when
the cleaning is successful.
If the indicator light does
not turn off, drive im­
mediate ly to an authorized Audi dealer or author­
ized Audi Serv ice Facility to have the malfunction
corrected.
_&, WARNING
Always adapt your speed to the current
weather, road and traffic conditions . You
should never disobey traffic laws in order to
follow driving recommendations.

M N <( (.J
'SI: ,...., \!) ..,.,
N \!) ,....,
@ Tips
For additional information on the diesel par­
ticulate fi lter, refer to ¢
page 198.
!?) Engine speed limitation
App lies to vehicles: with e ngin e speed limitat ion
Ill Engine speed maximum XXXX RPM
The engine speed is automatically limited to the
speed displayed in the instrument cluster. This
protects the eng ine from overheating.
The engine speed limitation deactivates once the
engine is no longer in the critical temperature
range and you have released the accelerator ped­
al.
If the engine speed limitation was activated by
an engine control malfunction, the
Im indicator
light also turns on. Make sure that the speed
does not go above the speed d isplayed. Drive to
an authorized Audi dealer or authorized Audi
Service Facility immediately to have the malfunc­
tion corrected .
.., Engine oil sensor
• Oil level! Sensor defective
If the symbol illuminates, contact your author­
ized Audi dealer and have the oil sensor inspect ­
ed. Until you have th is done, check the oil level
each time you refuel just to be on the safe side
¢page 222.
f Engine warm-up request
n Please warm up engine
Fuel has entered the engine oil, either from low
outside temperatures or frequent short d rives.
Drive until the engine is warm so that the fuel in
the eng ine oi l wi ll evaporate. Avoid high eng ine
speeds, full accelerating and heavy engine loads
when doing this .
Bil Fuel tank system
Ii] Please refuel
Instruments and indicator lights
If the indicator light turns on for the first time
and the message appears, there are about 2.6
gallons (10 liters) of fue l left in the tank.
Ii] Fuel tank system malfunction! Contact deal­
er
T he re is a malfunction in the fuel tank system.
Drive to an authorized Audi dealer or authorized
Audi Serv ice Facility immediately to have the
malfunction corrected .
{!) Tips
More information on refueling is available on
page
¢ page 212.
• Washer fluid level
m Please refill washer fluid
Fill the washer fluid for the windshield washer
system and the headlight washer system* when
the ignition is switched off ¢
page 231.
• Windshield wipers
m Windshield wiper defective
There is a malfunction with the windsh ield wip­
ers .
Drive to an authorized Audi dealer or authorized
Audi Serv ice Facility immediately to have the
malfunction corrected .
~/0$ Defective light bulb warn ing
If the J:!1 ind icator light turns on, a light has
failed. The message ind icates the location of the
light. If the
[tD indicator light a lso turns on, then
a rear fog light has failed. The position of the in­
dicator light corresponds with the location on the
vehicle.
Drive to an authorized Audi dealer or authorized
A udi Service Facility immed iately to have the
malfunction corrected.
Vehicle lights: Malfunction
There is a malfunction in the headlights or the
light switch.
21

Instruments and indicator Lights
- You can se lect the un its used for tempera ­
ture, speed an d other meas urements in the
M MI.
- For informat ion on the a udio/video and nav­
i gat io n* functions, refe r to t he se parate
M MI owner's manual.
Operation
The driver information system is operated using
th e buttons on the multifunction steering wheel .
Fig . 6 Mult ifu nctio n stee ring w hee l: operat ing t he drive r
i nforma tio n syste m
Fig. 7 In stru ment cluster: call in g up t he ve hicle fu nctio ns
men u
Operat ing
.,. Switc h the ignition on .
.. To sw itch between the tabs, p ress the rocker
switc h @ to the left or right ¢
fig. 6 .
.,. To access addi tio nal i nfo rmat io n be low or
above , turn the thum bwhee l@ dow n or u p.
.. To confirm a se lection, press the thumbwhee l
@.
.. To ope n the s ubme nu for an active ta b, press
the button ~@-
....
-N 9 (!:I .,. OJ
.,. To select a function programmed to a steering
whee l button*, press the button@.
24
Opening the Vehicle functions
.,. Sele ct the first t ab with the ro cker swi tch@ .
.. Press th e ~ button @. T he
Vehicle functions
menu is disp laye d ¢ fig . 7 .
.,. To se lect a menu item, tu rn and press the
thumbwhee l@ .
Resetting values to zero
.,. In t he Vehicle fun ctions me nu, sele ct On-bo ard
computer
o r Efficiency program.
.,. Yo u can now select between the long-term
memory and short-term memory .
.,. To reset the values in a memory, press and hold
the t humbwheel @for one second .
Assigning a function to a programmable
steering wheel button*
.,. Select the I CAR I funct ion button > (Car )* Sys­
tems
control b utt on > Vehicle settings > Steer­
ing wheel button programming .
The last function selected displays when you
switch the ig nition on .
On-board computer
Fig. 8 In stru men t cluster: fuel cons ump tio n
You can ca ll up the followi ng i nfo rmation in the
on-board comp uter :
- Da te
- Dr iv ing t ime (h) fro m the short-te rm memory
- Av erage cons umption in MPG ( l/100 km) from
t he sho rt-term memo ry
- Average spee d in mph (km/h) fro m the short ­
term m emory
- Distance drive n in miles (km) from the shor t­
term memory
- Cur rent fue l consumption in MPG ( l/100 km)

M N <( I.J ""'. rl I.O
"' N I.O rl
- Short-term memory overview
- Long-term memo ry overview
The short-term memo ry collects d riving informa­
tion from the time the ignit ion is switched on un­
til it is switched off .
If you continue driv ing within
two hours after switching the ignit ion off, the
new values are included when calcu lating the cur­
rent trip information.
Unlike the short-te rm memory, the long -term
memory is not erased automat ical ly. You can se­
lect the time period for evaluat ing trip informa­
tion yourself.
F or some veh icle functions, you can access the
tr ip informat ion from the tempor ary memory in
the line @.
Fuel consumption
The current fuel consumpt ion can be displayed
using a bar~
fig. 8. The average consumption
(mpg) s tored in the short-term memory is also
d isp layed. When the bar turns green, your veh icle
saves fuel by one of the following functions:
- Recuper ation : When the vehicle is coasting or
driv ing downh ill, electrical energy can be stored
in the battery. The bar will move toward 0.
-Cy linder on de mand Sy stem *: when the de­
ma nd for power is low and other conditions are
met, the eng ine a utomatically deactivates fo ur
cylinders. The driver and passengers will not
even notice this . The cylinders sw itch on again
when more power is needed.
(D Tips
Fue l consumptions (average and current),
range and speed are displayed in metric units
on Canadian models.
Ins trument s and indi cator ligh ts
Efficiency program
Applies to vehicles: wit h effic ie ncy program
Fig. 9 In st rum en t cluster: Other consumers
Fig. 10 Instrument clus te r: economy tip
The efficiency program can help you to use less
fuel. It shows other consumers that are using
fuel and economy tips give advice on how to drive
effic iently. The efficiency program rece ives d is­
tance a nd consumpt ion data from the on -board
compu ter.
T o d isplay the eff ic iency program, open the
V ehi­
cle func tion s
menu and select the Efficienc y pro ­
gram
menu i tem.
Other consumers
The En ergy u sag e view lists other equipment
that is currently affecting fuel consumption . The
display shows up to three other cons umers @
~ fig. 9. The equipment using the most fue l is
listed fi rst. If more than three items using fue l
are swi tched on, the equipment that is currently
using the most fuel is disp layed .
A scale @also shows the current tota l consump-
t ion of all other consumers. .,.
25

Instruments and indicato r Lights
Economy tips
In certain situat ions, economy tips appear auto­
matica lly for a short time in the efficiency pro­
gram ~
fig. 10. If yo u follow these economy tips,
you can reduce your vehicle's fuel consumption.
To turn an economy tip off immediately after it
appears, press any button on the multifunction
steering whee l.
(D Tips
-If you e rase the data in the efficiency pro­
gram, the values in the on-board computer
will a lso be reset.
- Once you have turned an economy tip off, it
will on ly appear again after you turn the ig­
nition on again.
- The economy tips are not displayed in every
instance, but rather in intervals over a peri­
od of t ime .
Odometer
Fig . 11 Instrum ent cluste r: o dom eter an d res et butto n
The display of distance driven is shown in m iles
"mi" or kilometers "km". The units of measure ­
ment (kilometers/miles) can be changed in the
Infotainment system.
Upper odometer
The trip odometer shows the distance driven
since it was last reset . It can be used to measure
short distances. The last digit shows distances of
100 meters or 1/10 of a mile .
The trip odometer can be reset to zero by press­
ing the reset button~-
26
Lower odometer
The lower odometer shows the total number o f
kilometers or miles that the vehicle has driven.
Malfunction indicator
If there is a malfunction in the instrument clus­
ter ,
DEF will appear in the tr ip odometer display .
Have the malfunction corrected as soon as poss i­
ble.
Time/date display
Fig. 12 Ins trumen t cl uster : T im e and dat e
The date, time of day and time and date format
can be set in the Infotainment system. Refer to
the Infotainment system operating manual fo r
instructions.
When you open the dr iver's door, the date and
time appear in the instrument cluster display for
30 seconds .
Service interval display
The service interval display detects when your ve­
hicle is due for service .
Fig. 13 Instrume nt cluster d ispl ay: service interv al displ ay
(example)
The service interval display works in two stages: ..,.