2015 LEXUS NX300h Owners Manual

4015-9. Bluetooth ®
Phone
5
Lexus Display Audio system
NX300h_U_OM78007U Move the controller to the left while on the message screen.
Select “Quick Message” to display the “Quick Message” screen.
Select the desired message and then select “Send”. ■
Editing a quick message
Move the controller to the left while on the message screen.
Select “Quick Message” and move the cursor to the desired message.
Move the controller to the left and select “Edit”. To return to the default message after editing, select “Default”.
This function is available when the “E-mail Notification Popup” or “SMS/MMS
Notification Popup” are set to on. (  P. 4 0 8 )
“Incoming E-mail Display” or “Inco ming SMS/MMS Display” are set to
“Drop-Down”
When E-mail/ SMS/MMS are received, the incoming message is displayed
on the upper side of the screen with a sound. 
“Incoming E-mail Display” or “Incoming SMS/MMS Display” are set to “Full
Screen”
When E-mail/ SMS/MMS are received, th e incoming message screen is dis-
played with a sound and it can be operated on the screen.
Check the message.
Refuse to check the message.
Call to receive the message
sender’s phone number.Replying to a message
Receiving a message popup function 1
2
3
1
2
3
1
2
3

402 5-9. Bluetooth ®
Phone
NX300h_U_OM78007UUsing the steering wheel switches Volume switch
During an incoming call: Adjusts the
ring tone volume
During speaking on the phone:
Adjusts in call volume The voice guidance volume cannot be
adjusted using this button.
Off-hook switch
• Start call
• Receiving
• Phone top screen display
On-hook switch
• End call
• Refuse call
Talk switch
Press: Turns the voice command system on
Press and hold: Turns the voice command system offThe steering wheel switches can be used to operate a connected cellular
phone.
Operating a telephone usin g the steering wheel switches1
2
3
4

4035-9. Bluetooth ®
Phone
5
Lexus Display Audio system
NX300h_U_OM78007UBluetooth ®
phone settingsGo to “Phone/Message Settings”: “MENU” button  “Setup”  “Phone”
Register and connect a Bluetooth ®
device. (  P. 3 8 4 )
Adjust the call volume and message
readout volume. (  P. 4 0 3 )
Change the contact/call history set-
tings. (  P. 4 0 5 )
Change messaging settings.
(  P. 4 0 8 )
Change phone display settings. (  P. 4 0 4 )
Go to “Sound Settings”: “MENU” button  “Setup”  “Phone”  “Sound
Settings”
Change the ring tone type
Adjust the ring tone volume
Adjust the message readout volume
Change the incoming SMS/MMS
tone type
Adjust the incoming SMS/MMS
tone volume
Change the incoming e-mail tone
type
Adjust the incoming e-mail tone vol-
ume
Adjust in call tone volumeYou can adjust the hands-free system to your desired settings.
“Phone/Message Settings” screen 1
2
3
4
Sound settings 5
1
2
3
4
5
6
7
8

404 5-9. Bluetooth ®
Phone
NX300h_U_OM78007U Go to “Phone Display Settings”: “MENU” button  “Setup”  “Phone” 
“Phone Display Settings”
Change the incoming call display
Set the phonebook/history transfer
status notification display on/off ■
To return to the default volume settings
Move the controller to the left and then select “Default”.Phone display settings 1
2

4055-10. Phonebook
5
Lexus Display Audio system
NX300h_U_OM78007UContact settings Go to “Contact/Call History Settings”: “MENU” button  “Setup”  “Phone”
 “Contact/Call History Settings”
Select to set the automatic phone-
book download on/off With this setting on , phonebook data will
be automatically transferred.
Depending on the ce llular phone, call
history will be also transferred.
Update contacts
Change the sort contacts mode
Add a favorite (  P. 4 0 6 )
Delete a favorite (  P. 4 0 7 )
Select to set the display of contact
images on/off
Delete call history. (PBAP incom-
patible Bluetooth ®
phones, or com-
patible phones with “Automatic
Tr a n s f e r ” o f f )
Add a new contact (PBAP incompatible Bluetooth ®
phones, or compatible
phones with “Automatic Transfer” off) Input the name, phone number and phon e number type to add a new contact.
Edit a contact (PBAP in compatible Bluetooth ®
phones, or compatible
phones with “Automatic Transfer” off) Select the desired contact to edit.
Delete contacts (  P. 407) (PBAP incompatible Bluetooth ®
phones, or com-
patible phones with “Automatic Transfer” off) ■
Return to the default settings
Move the controller to the left and select “Default”.Individual phonebooks from up to 5 ph ones can be registered to the system.
The data for 2500 contacts (up to 4 nu mbers per contact) can be registered
into the system’s phonebook.
“Contact/Call History Settings” screen 1
2
3
4
5
6
7
8
9
10

406 5-10. Phonebook
NX300h_U_OM78007U You can transfer the phone numbers in your Bluetooth ®
phone to the system.
Operation methods differ between PBAP compatible and PBAP incompatible
Bluetooth ®
phones. If your cellular phone does not support either PBAP or
OPP services, you cannot transfer contacts.
Go to “Transfer Contacts”: “MENU” button  “Setup”  “Phone”  “Contact/
Call History Settings”  “Update Contacts from Phone”
For PBAP compatible Bluetooth ®
phones when “Automatic Transfer” is set to
on
Start the update automatically. 
For PBAP compatible Bluetooth ®
phones when “Automatic Transfer” is set to
off and PBAP incompatible Bluetooth ®
phones
Select to transfer the contact from
the connected cellular phone and
replace the current one.
Select to transfer the desired con-
tact data from the connected cellu-
lar phone to add to the current one.
You can register the desired contact from the phonebook. Up to 15 contacts per
phone can be registered.
Go to “Add Favorite”: “MENU” button  “Setup”  “Phone”  “Contact/
Call History Settings”  “A d d F a v o r i t e ”
Choose the contact to register.Transferring a phone number
1
2
Registering favorites 1
2

4075-10. Phonebook
5
Lexus Display Audio system
NX300h_U_OM78007U Go to “Remove Favorite”: “MENU” button  “Setup”  “Phone”  “Con-
tact/Call History Settings”  “Remove Favorite”
Select the desired contacts. You can select all contacts by selecting “Select All”.
Move the controller to the left and select “Remove”.
Go to “Delete Contacts”: “MENU” button  “Setup”  “Phone”  “Con-
tact/Call History Settings”  “Delete Contacts”
Select the desired contacts. You can select all contacts by selecting “Select All”.
Move the controller to the left and select “Delete”.■
Phonebook data
Phonebook data is managed separately for every registered phone. When one phone is
connected, you cannot read the registered data of the other phones. ■
When transferring contacts
Transfer contacts while the hy brid system is operating.
If the cellular phone is OPP or PBAP compatible, you may need to input “1234” on the
cellular phone for OBEX certification. ■
When you have selected “Replace contacts ” or “Add contact” to transfer contacts
If the cellular phone does not support OPP service, you cannot use these functions. You
can transfer the phonebook data only by operating your phone.■
Transferring contacts while Bluetooth ®
audio is playing
Bluetooth ®
audio will disconnect. It will reconnect automatically when data transfer fin-
ishes. It may not reconnect dependin g on the phone which is connected.Removing favorites
Deleting the contacts data 1
2
3
1
2
3

408 5-10. Phonebook
NX300h_U_OM78007UMessaging setting Go to “Messaging Settings”: “MENU” button  “Setup”  “Phone”  “Mes-
saging Settings”
Set the message forwarding from
cellular phones on/off
Set the automatic message read out
function on/off
Set the new SMS/MMS notification
display on/off
Set the new e-mail notification dis-
play on/off
Set the signature function on/off
Set the cellular phone’s message
read and unread status update func-
tion on/off.
Change the incoming SMS/MMS display.
Change the incoming e-mail display.
Change the account name to “Service name” (names from the connected
device) or “Fixed name” (pre-defined names). ■
Restoring the default settings
Move the controller to the left then select “Default” on the “Messaging Settings” screen. 1
2
3
4
5
6
7
8
9