2015 LEXUS LX570 Owners Manual

6413-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) ■
Calling by using the latest call history item
Press on the steering wheel to display the “Phone” screen.
Press on the steering wheel to display the “Call History” screen.
Press on the steering wheel to sele ct the most recent number in the
history.
Touch or press on the steering wheel. ■
To cancel voice recognition ●
Press and hold or on the steering wheel. ●
Touch “Cancel”. ■
When using voice recognition
Use correct commands and speak clearly, otherwise the system may not correctly
recognize the command. Wind or other noises may also cause the system not to
recognize the desired command. STEP 1
STEP 2
STEP 3
STEP 4

6423-5. Using the hands-free sy stem (for cellular phone)
LX570_OM_OM60L96U_(U) Receiving a call
When a call is received, the following screen is d isplayed together with a
sound.
Touch or press on the
steering wheel.
■ To refuse a call
Touch or press on the steering wheel.
■ To adjust the incoming call volume
Touch “-” or “+”, turn the “PWR•VOL” knob, or use the volume switch
on the steering wheel. ■
International calls
Received international calls may not be displayed correctly depending on the cellu-
lar phone in use.

6433-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) Speaking on the phone
The following screen is displaye d when speaking on the phone.
■ To adjust the incoming call volume
Touch “-” or “+”, turn the “PWR•VOL” knob, or use the volume switch
on the steering wheel.
■ To prevent the other party from hearing your voice
Touch “Mute”.

6443-5. Using the hands-free sy stem (for cellular phone)
LX570_OM_OM60L96U_(U) ■ Inputting tones
When using phone services such as an answering service or a bank,
you can store phone numbers and code numbers in the phonebook.
Touch “0-9” on the “Call” screen.
Input the number. If repeated tone symbols
* are
stored in the phonebook, “Send”
and “Clear” are displayed on the
right side of the screen.
* : Repeated tone symbols are sym-
bols or numbers displayed as p
or w, that come after the phone
number.
(e.g. 056133w0123p#1 ✽ )
Confirm the number displayed on the screen, and touch “Send”. If you touch “Clear”, this function will end.
■ To transfer a call
Touch “Handset Mode” to change from hands-free call to cellular
phone call. Touch “Handsfree Mode” to change from cellular phone
call to hands-free call.
■ To hang up
Touch or press on the steering wheel. STEP 1
STEP 2
STEP 3

6453-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) ■ Call waiting
When a connected call is interrupted by the third party, the incoming
call message will be displayed.
● To talk with the other party : Touch or press on the
steering wheel.
● To refuse the call: Touch or press on the steering wheel.
Everytime you touch or press on the steering wheel after
a call is interrupted, you will be switched to the other party.
If your cellular phone is not accepted in HFP Ver. 1.5, this function can-
not be used. ■
Incoming call ●
The ring tone that has been set in th e “Phone Sound Settings” screen sounds
when there is an incoming call. (  P. 649)●
Depending on the type of Bluetooth ®
phone, both the system and Bluetooth ®
phone may sound simultaneously wh en there is an incoming call.■
Transferring calls ●
It is not possible to transfer from hand s-free to a cellular phone while driving.●
If you transfer from a cellular phone to hands-free, the hands-free screen will be
displayed, and you can operate the system using the screen. ●
Transfer method and operation may vary according to the cellular phone used.●
For operation of the cellular phone in use, see the phone’s manual.■
Repeated tone symbols
When the “p” pause tone is used, after wait ing 2 seconds the tone data up until the
next pause tone will be automatically sent. When the “w” pause tone is used, the
tone data up until the next pause tone will be automatically sent after user opera-
tion.

6463-5. Using the hands-free sy stem (for cellular phone)
LX570_OM_OM60L96U_(U) Using a Bluetooth ®
phone message
Received messages can be forwarded from the connected Bluetooth ®
phone, enabling checking and replying (Quick reply).
■ Checking a message
Display the “Phone” screen. (  P. 625)
Touch “Messages” on the “Phone” screen. Depending on the type of Bluetooth ®
phone being connected, it
may be necessary to perform additional steps on the phone.
When “Message Transfer” is set to “Off”, a confirma tion screen will
be displayed. Touch “Yes”.
Touch the desired message to
check. The text of the message is not dis-
played while driving.
Touching “Previous” or “Next” dis-
plays the previous or next mes-
sage.
Touch “Play” to start reading out of the me ssage. Touch “Stop” to
stop the function. ■
While driving
Key input is unavailable. ■
Voice recognition during a call
“Send Tones” can be operated by voice recognition. (  P. 635)■
Interrupt call operation
Interrupt call operation may differ from depending on your phone company and the
cellular phone.
STEP 1
STEP 2
STEP 3
STEP 4

6473-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L96U_(U) ■ To adjust the message reading out volume
Touch “-” or “+”, turn the “PWR•VOL” knob, or use the volume switch
on the steering wheel.
■ Replying a message (Quick reply)
Touch “Reply” on the desired mes-
sage screen.
Touch the desired message. Touch
“Send”. While the message is being sent, a
sending message screen is dis-
played.STEP 1
STEP 2

6483-5. Using the hands-free system (for cellular phone)
LX570_OM_OM60L96U_(U) ■
To check the message ●
Messages are displayed in the appropriate connected Bluetooth ®
phone’s reg-
istered mail address folder. Touch the tab of the desired folder to be displayed.●
Only received messages on the connected Bluetooth ®
phone can be dis-
played. ●
When the received message is an e-ma il and “Update Message Read Status on
Phone” is set to “On”, “Mark as Unread” or “Mark as Read” can be selected.
Touch “Mark as Unread” to mark mails that have been read on the Bluetooth ®
phone as unread. Conversely, touch “Mar k as Read” to mark mails that have
not been read on the Bluetooth ®
phone as read. (  P. 666)■
Calling using SMS/MMS message
You can call using the SMS (Short Me ssage Service)/MMS (Multimedia Messag-
ing Service) message sender’s phone number. (  P. 637)■
If the message delivery failed
If message delivery has fail ed, a notification will be displayed on the screen.
Touch “Retry” to attempt to send the message again or touch “Cancel” to cancel. ■
Editing a quick reply message
You can edit the “Quick Reply Messages”. (  P. 668)■
New message notification
If “New Message Pop-up” and “New Message Voice Notification” are set to “On”,
a notification appears on the screen and a voice notification will be heard when a
new message arrives, touch “Read” to ch eck the message , also to check the mes-
sage later, touch “Ignore”. When “Automat ic Message Readout” is set to “On”, the
message will be automatically read out. (  P. 666)