2015 INFINITI QX60 HYBRID Owner's Manual

Page 537 of 580

INFINITI QX60 HYBRID 2015  Owners Manual 9 Technical and consumer information
Recommended fluids/lubricants and capacities.......9-2
Recommended fuel: ............................9-4
Engine oil and oil filter recommendations ..........9-6
Ai

Page 538 of 580

INFINITI QX60 HYBRID 2015  Owners Manual The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to

Page 539 of 580

INFINITI QX60 HYBRID 2015  Owners Manual Capacity (Approximate)Recommended Fluids and Lubricants
US measure Imp measure Liter
Power steering fluid (PSF) ———• Genuine NISSAN E-PSF or equivalent.
• Use of a power steering fluid other

Page 540 of 580

INFINITI QX60 HYBRID 2015  Owners Manual RECOMMENDED FUEL:
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) num-
ber (Research octane number 91) .
CAUTION
●Using a fuel other than that specified
cou

Page 541 of 580

INFINITI QX60 HYBRID 2015  Owners Manual ●If a methanol blend is used, it should
contain no more than 5% methanol
(methyl alcohol, wood alcohol) . It
should also contain a suitable amount
of appropriate cosolvents and corro-
sion inhibitor

Page 542 of 580

INFINITI QX60 HYBRID 2015  Owners Manual ENGINE OIL AND OIL FILTER
RECOMMENDATIONS
Selecting the correct oil
It is essential to choose the correct grade, quality
and viscosity engine oil to ensure satisfactory
engine life and performance. Fo

Page 543 of 580

INFINITI QX60 HYBRID 2015  Owners Manual Your engine was filled with a high-quality engine
oil when it was built. You do not have to change
the oil before the first recommended change
interval. Oil and filter change intervals depend
upon how

Page 544 of 580

INFINITI QX60 HYBRID 2015  Owners Manual ENGINE
ModelQR25DER
Type Gasoline, 4-cycle, DOHC
Cylinder arrangement 4-cylinder in-line
Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0)
Displacement cu in (cm
3) 151.82 (2,488)
Firing order 1–3–4