2015 CITROEN DS3 CABRIO DAG Handbook (in English)

111
DS3_en_Chap06_conduite_ed01-2014
The gear change requests are only carried out if   the   engine   speed   permits.
It is not necessary to release the accelerator
pedal
  during   gear   changes.
When
  braking   or   slowing   down,   the   gearbox  
c

hanges   down   automatically   so   that   the   vehicle  
p

icks   up   in   the   right   gear.
Under
  full   acceleration,   the   change   up   will  
n

ot   take   place   unless   the   driver   operates   the  
g

ear   lever   or   steering   mounted   control   paddle  
(

unless   the   engine   is   close   to   its   maximum  
s

peed).
Reverse
To engage reverse, the vehicle must be immobilised   with   your   foot   on   the   brake.
F

Sel
ect position R .
Stopping the vehicle
Before switching off the engine:
-  c hange   to   position   N to be in neutral,
or
-
 
l
eave   the   vehicle   in   gear;   in   this   case   the  
v

ehicle   cannot   be   moved.
Manual mode
F Select position M.
The   gears   engaged   appear   in  
s

uccession   in   the   instrument   panel.
You
  can   change   mode   at   any   time   by  
m

oving   the   gear   lever   from   A to M or
the
  other   way   round.
Never select neutral (position N ) when
moving. There
  is   an   audible   signal   on  
enga

gement
 o
f
 r
everse.For
  all   parking   situations,   you   must
apply the parking brake
 

to   immobilise  
t

he   vehicle.
When
  immobilising   the   vehicle   with   the  
e

ngine   running,   you   must   put   the   gear  
l

ever into neutral (position N).
Before
  doing   anything   under   the  
b

onnet,   ensure   that   the   gear   lever   is   in  
neu

tral (position N)
  and   that   the   parking  
b

rake   is   applied.
At
  low   speed,   if   reverse   gear   is   requested,  
the N
  warning   lamp   flashes   and   the   gearbox  
g

oes   into   neutral   automatically.
To
  engage   reverse,   put   the   gear   lever   into  
p

osition N, then to position R .
driving

DS3_en_Chap06_conduite_ed01-2014
Operating fault
With the ignition on, if this warning lamp   comes   on   and   AUTO flashes,
accompanied
  by   an   audible   signal   and   a  
m

essage
 
in
  the   multifunction   screen,   this  
i

ndicates
 
a
 
gearbox   fault.
Have
 
it
 
checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w

orkshop.
Reinitialisation
(5-speed electronic
gearbox)
In exceptional circumstances, the g earbox   may   need   an   automatic  
r

einitialisation:   starting   and   gear  
c

hanging   are   no   longer   possible.
AUTO and - - appear in the
instrument
 pan

el.
AUTO and - -   appear   in   the   instrument   panel.
F Select position N.
F  P ress   the   brake   pedal.
F

W
ait for around 30 seconds until N or a
gear
  appears   in   the   instrument   panel.
F
 
M
ove   the   gear   lever   to   position   A, then to
position N .
F
 
W
ith   your   foot   still   on   the   brake   pedal,   start  
t

he
 eng
ine.
The
  gearbox   is   operational   again.
Following
  disconnection   of   the   battery,   it   is  
n

ecessary   to   reinitialise   the   gearbox.
F  
S
witch   on   the   ignition.
Follow   the   procedure   described   above.

11 3
DS3_en_Chap06_conduite_ed01-2014
Four-speed automatic gearbox which offers a choice   between   the   comfort   of   fully   automatic  
o

peration, enhanced by sport and snow
programmes,
 o

r
 m
anual
 g
ear
 c
hanging.
There
  are   therefore   four   driving   modes:
-

a
utomatic operation for electronic
management
  of   the   gears   by   the   gearbox,
-

sp
ort
 
programme   for   a   more   dynamic   style  
o

f   driving,
-

s
now
 
programme   to   improve   driving   when  
t

raction is poor,
-

s
equential
 
operation   for   manual   changing  
o

f   the   gears   by   the   driver.
Automatic gearbox
1. Gear  lever.
2. bu tton "S" (spor t) .
3.
bu

tton "T " (snow).
Gear selection gate
P.  Park.
-  I mmobilisation   of   the   vehicle,   parking   brake  
o

n   or   off.
-
 
S
tarting   the   engine.
R.
 R

everse.
-
 
R
eversing   manoeuvres,   vehicle   stationary,  
e

ngine   at   idle.
N.
 

Neutral.
-
 
I
mmobilisation   of   the   vehicle,   parking   brake  
o

n.
-
 
S
tarting   the   engine.
d

.
 A
utomatic
 ope
ration.
M + / -.

M
anual operation with sequential
changing
  of   the   four   gears.
F
 
P
ush   for wards   to   change   up   through   the  
g

ears.
or
F
 
P
ull   backwards   to   change   down   through  
t

he   gears.
Gear lever
driving

DS3_en_Chap06_conduite_ed01-2014
When you move the lever in the gate to select a  position,   the   corresponding   indicator   is  
d

isplayed   in   the   instrument   panel.
P.
 Pa

rk
R.
R

everse
N.
N

eutral
d

.
 D
rive   (Automatic   driving)
S.
Sport
 pro
gramme
T .
Snow
 pro
gramme
1 2 3 4.
  
G
ears   engaged   during   manual  
ope

ration
-.
 I

nvalid   value   during   manual   operation
displays in the instrument panel
Foot on brake
F Press  the   brake   pedal   when   this  i
ndicator   lamp   is   displayed   in   the  
i

nstrument   panel   (e.g.:   starting  
t

he
 eng
ine).
Moving off
If position N is selected inadvertently
while  driving,   allow   the   engine   to  
r

eturn to idle then select position d to
accelerate.
If
  the   ambient   temperature   is   below  
-

23°C,   the   engine   should   be   left   at   idle  
f

or   four   minutes,   to   ensure   the   correct  
o

peration   and   life   of   the   engine   and  
g

earbox. When
  the   engine   is   running   at   idle,   with  t
he   brakes   released,   if   position   R
, d or
M   is   selected,   the   vehicle   moves   even  
w

ithout   the   accelerator   being   pressed.
When
  the   engine   is   running,   never  
l

eave children in the vehicle without
supervision.
When
  carrying   out   maintenance   with  
t

he   engine   running,   apply   the   parking  
b

rake   and   select   position   P.
F
 
A

pply   the   parking   brake.
F

Sel
ect position P or N
.
F
 
S

tart   the   engine.
If this procedure is not followed, there is an
audible   signal,   accompanied   by   the   display   of  
a

n
 
warning   message.
F
 
W
ith   the   engine   running,   press   the   brake  
ped

al.
F
 
R

elease   the   parking   brake.
F

Sel
ect position R
, d or M
.
F
 
G

radually   release   the   brake   pedal.
The
 
vehicle   moves   off   immediately.

11 5
DS3_en_Chap06_conduite_ed01-2014
Automatic operation
F Select position d for automatic c hanging o
f   the   four   gears.
The
  gearbox   then   operates   in   auto-adaptive  
m

ode,   without   any   intervention   on   the   part  
o

f   the   driver.   It   continuously   selects   the   most  
s

uitable   gear   according   to   the   style   of   driving,  
t

he profile of the road and the load in the
vehicle.
For
  maximum   acceleration   without   touching   the  
g

ear   lever,   press   the   accelerator   pedal   down  
f

ully   (kick   down).   The   gearbox   changes   down  
a

utomatically   or   maintains   the   gear   selected  
u

ntil   the   maximum   engine   speed   is   reached.
On
  braking,   the   gearbox   changes   down  
a

utomatically   to   provide   efficient   engine  
b

raking.
If you release the accelerator sharply, the
gearbox
  will   not   change   to   a   higher   gear   for  
s

afety   reasons.
Never select position N while the
vehicle
  is   moving.
Never select positions P or R unless
the
  vehicle   is   completely   stationary.
Sport and snow
programmes
These two special programmes supplement the automatic   operation   in   very   specific   conditions  
o

f   use.
Sport programme "S"
F Press button "S" ,   after   starting   the   engine.
The   gearbox   automatically   favours   a   dynamic  
s

tyle   of   driving.
S
  appears   in   the   instrument   panel.
Snow programme "T"
F Press button " T",   after   starting   the   engine.
The   gearbox   adapts   to   driving   on   slippery  
r

oads.
This
  programme   improves   starting   and   drive  
w

hen   traction   is   poor.
T
  appears   in   the   instrument   panel.
Return to automatic
operation
F At  any   time,   press   the   button   selected  a
gain   to   quit   the   programme   engaged   and  
r

eturn   to   auto-adaptive   mode.
driving

DS3_en_Chap06_conduite_ed01-2014
There is a risk of damage to the gearbox:
- i f you press the accelerator and
brake
  pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
g

ear   lever   from   the   P position to
another position when the battery
is
  flat.
To
  reduce   fuel   consumption   when   at
 a

  prolonged   standstill   with   the   engine
 r

unning   (traffic   jam...),   put   the   gear   lever   in
 t

he N
 

position   and   apply   the   parking   brake.
If the lever is not in position P
,
when the driver's door is opened or
approximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the lever to position P ;
 
the
 
m

essage
 d

isappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace.
Operating fault
Manual operation
When the ignition is on, the lighting o f   this   warning   lamp,   accompanied  
b

y
 
an
 
audible   signal   and   a   message   in   the  
m

ultifunction   screen,   indicates   a   gearbox   fault.
In
 
this
 
case,   the   gearbox   switches   to   back-up  
m

ode
 
and
 
is   locked   in   3rd   gear.   You   may   feel  
a

 
substantial   knock   when   changing   from   P
to R
 
and
 
from   N to R .
  This   will   not   cause   any  
d

amage
 
to
 
the   gearbox.
Do
 
not
 
exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact a CITR
oË

N dealer or a qualified
workshop
 
as   soon   as   possible.
F

Sel

ect position M for sequential
 c

hanging
 o

f
 
the
 
four
 
gears.
F

P

ush the lever towards the +
 
sign
 
to
 
c

hange
 
up
 
a
 
gear.
F

P

ull the lever towards the -
 
sign
 
to
 
change
 
d

own
 
a
 
gear.
It
 
is
 
only
 
possible
 
to
 
change
 
from
 
one
 
gear
 
to
 
a

nother
 
if
 
the
 
vehicle
 
speed
 
and
 
engine
 
speed
 
p

ermit;
 
other wise,
 
the
 
gearbox
 
will
 
operate
 
t

emporarily
 
in
 
automatic
 
mode. This
 
symbol
 
is
 
displayed
 
if
 
a
 
gear
 
i

s
 
not
 
engaged
 
correctly
 
(selector
 
b

etween
 
two
 
positions).
d

 
disappears
 
and
 
the
 
gears
 
e

ngaged
 
appear
 
in
 
succession
 
in
 
the
 
in

strument
 pan

el.
Stopping the vehicle
Before switching off the engine, you can engage p osition P or N 
to   place   the   gearbox   in   neutral.
In
  both   cases,   apply   the   parking   brake   to
 i

mmobilise   the   vehicle.
Invalid value during manual
operation
If the engine speed is too low or too high, the gear   selected   flashes   for   a   few   seconds,   then  
t

he   actual   gear   engaged   is   displayed.
It
  is   possible   to   change   from   position  d
(automatic)
  to   position   M   (manual)   at   any   time.
When
  the   vehicle   is   stationary   or   moving  
v

ery   slowly,   the   gearbox   selects   gear   M1
automatically.
The
  sport   and   snow   programmes   do   not  
o

perate   in   manual   mode.

11 7
DS3_en_Chap06_conduite_ed01-2014
Gear shift indicatorSystem which reduces fuel consumption by advising the driver to change up.
Operation
Example:
- Y ou   are   in   third   gear.
-
 
Y
ou   press   the   accelerator   pedal.
-
 
T
he   system   may   suggest   that   you   engage  
a

  higher   gear.
The
  information   appears   in   the   instrument  
p

anel   in   the   form   of   an   arrow. The
  system   adapts   its   gear   change  
r

ecommendation   according   to   the  
d

riving   conditions   (slope,   load, ...)   and  
t

he   demands   of   the   driver   (power,  
a

cceleration,   braking, ...).
The
  system   never   suggests:
-
 
e
ngaging   first   gear,
-
 enga

ging
 r
everse
 g
ear,
-
 
e
ngaging   a   lower   gear.
With
 
an
 
electronic
 
or
 
automatic
 
g

earbox,
 
the
 
system
 
is
 
only
 
active
 
in
 
m

anual
 m

ode.
On  vehicle   fitted   with   a   manual  
g

earbox,   the   arrow   may   be  
a

ccompanied   by   the   gear  
re

commended.
Depending
 
on
 
the
 
driving
 
situation
 
and
 
your
 v
ehicle's
 
equipment,
 
the
 
system
 
may
 
advise
 
y

ou
 
to
 
skip
 
one
 
(or
 
more)
 
gear(s).
 
You
 
can
 
f

ollow
 
this
 
instruction
 
without
 
engaging
 
the
 
i

ntermediate
 g

ears.
The
 
gear
 
engagement
 
recommendations
 
must
 
n

ot
 
be
 
considered
 
compulsory.
 
In
 
fact,
 
the
 
c

onfiguration
 
of
 
the
 
road,
 
the
 
amount
 
of
 
traffic
 
a

nd
 
safety
 
remain
 
determining
 
factors
 
when
 
c

hoosing
 
the
 
best
 
gear.
 
Therefore,
 
the
 
driver
 
r

emains
 
responsible
 
for
 
deciding
 
whether
 
or
 
not
 
t

o
 
follow
 
the
 
advice
 
given
 
by
 
the
 
system.
This
 
function
 
cannot
 
be
 
deactivated.
driving

DS3_en_Chap06_conduite_ed01-2014
Stop & StartThe Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams, or other...). The engine   restarts   automatically   -   START   mode   -   as   soon   as   you   want   to   move   off.   The   restart   takes   place   instantly,   quickly   and   silently.
Per fect
  for   urban   use,   the   Stop   &   Start   system   reduces   fuel   consumption   and   exhaust   emissions   as   well   as   the   noise   level   when   stationary.
Operation
Going into engine STOP mode
For your comfort, during parking manoeuvres,   STOP   mode   is   not  
a

vailable for a few seconds after
coming
  out   of   reverse   gear.
STOP
  mode   does   not   affect   the  
f

unctionality of the vehicle, such as for
example,
  braking,   power   steering...
Never
  refuel   with   the   engine   in   STOP  
m

ode;   you   must   switch   off   the   ignition  
w

ith   the   key.
The "E
cO
" 
warning
 
lamp
 
comes
 o
n
 
in
 
the
 
instrument
 
panel
 
and
 
the
 
e

ngine
 
goes
 
into
 
standby:
-

w

ith a manual gearbox , at speeds below
12
 
mph
 
(20
 
km/h),
 
when
 
you
 
put
 
the
 
gear
 
l

ever into neutral, and you release the
clutch
 
pedal.
-

w

ith a 5 or 6-speed electronic gearbox ,
when
 
stationary
 
or
 
at
 
speeds
 
below
 
5
 
mph
 
(

8
 
km/h)
 
(depending
 
on
 
version),
 
when
 
you
 
p

ress
 
the
 
brake
 
pedal
 
or
 
put
 
the
 
gear
 
lever
 
i

n position N .
A
 
time
 
counter
 
calculates
 
the
 
sum
 o

f
 
the
 
periods
 
in
 
STOP
 
mode
 d

uring
 
a
 
journey.
 
It
 
rests
 
itself
 t

o
 
zero
 
every
 
time
 
the
 
ignition
 
is
 s

witched
 
on
 
with
 
the
 
key. STOP
  mode   is   not   invoked   when:
- t he driver's door is open,
-

t
he driver's seat belt is not fastened,
-
 
t
he   vehicle   has   not   exceeded   6   mph  
(10
  km/h)   since   the   last   engine   start   using  
t

he   key,
-
 
t
he   engine   is   needed   to   maintain   a  
c

omfortable   temperature   in   the   passenger  
c

ompartment,
-
 
d
emisting   is   active,
-
 
s
ome   special   conditions   (battery   charge,  
e

ngine   temperature,   braking   assistance,  
a

mbient   temperature...)   where   the   engine   is  
n

eeded   to   assure   control   of   a   system.
Special cases: STOP mode not
available
The "EcO" warning   lamp   flashes   for  a
  few   seconds   then   goes   off.
This operation is perfectly normal.