Page 273 of 420
271
The direction indicator bulb is located below the front lamp.
F
T
urn the bulb holder a quarter turn anti-
clockwise.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For
reassembly, carry out these operations in
r
everse
o
rder.
Direction indicators Front foglamps
F Unclip the finisher by pulling at the top.
F R emove the two screws to remove the unit.
F
T
urn the bulb holder a quarter turn.
F
R
emove the bulb holder.
F
C
hange the failed bulb.
For
reassembly, carry out these operations in
r
everse order, pressing on the finisher to refit it.
Faster
flashing
of
a
direction
indicator
w
arning
lamp
(left
or
right)
indicates
a
f
ailed
bulb
on
that
side.
Direction indicators (light
emitting diodes - LED)
For the replacement of this type of lamp, c ontact a CITROËN dealer or a qualified
w
orkshop.
7
Practical information
Page 274 of 420
272
You should contact a CITROËN dealer or a qualified workshop for the replacement of the
l
ight emitting diode - LED.
Door mirror spotlamps
Integrated direction indicator
side repeaters
You should contact a CITROËN dealer or a qualified workshop for the replacement of these
b
ulbs. 1.
D
irection indicator (PY21W amber).
2.
S
idelamp / foglamp (P21/5W).
Rear lamps
Light emitting diodes-LEDs
For replacement, contact a CITROËN d
ealer or qualified workshop.
3.
B
rake
lamp
/
sidelamp
(light
emitting
d
iodes-LED).
4.
R
eversing
lamp
(W16W).
5.
D
irection
indicator
(PY21W).Model with LED lamps
3. Brake lamp / sidelamp (P21/5W).
4. R eversing lamp (W16W).
5.
D
irection indicator (PY21W).
Model with conventional bulb lamps
Practical information
Page 275 of 420
273
Lamps on the tailgate
Model with LED lamps
Identify
the
failed
bulb.
F
O
pen
the
boot.
F
R
emove
the
access
cover.
Model with conventional bulb lamps
F
R
emove
the
three
lamp
fixing
screws
A .
F
D
isconnect
the
lamp
connector.
F
C
arefully
remove
the
lamp
from
the
outside
b
y
pressing
the
retaining
clip
B .
F
T
urn the bulb holder a quarter of a turn
a
nti-clockwise and pull the bulb out.
F
C
hange the bulb.
For
reassembly, carry out these operations in
r
everse
o
rder.
7
Practical information
Page 276 of 420
274
1. Direction indicator (PY21W amber).
2. S idelamp / foglamp (P21/5W).
Rear lamps
3. Sidelamp (light emitting diodes-LED).
4. B rake lamp (light emitting diodes-LED).
5.
D
irection indicator (PY21W).
6.
R
eversing lamp (light emitting
diodes-LED).
Model with LED lamps
3. Sidelamp (P21/5W).
4. B rake lamp / sidelamp (P21/5W).
5.
D
irection indicator (PY21W).
6.
R
eversing lamp (P21W).
Model with conventional bulb lamps
Light emitting diodes-LEDs
For replacement, contact a CITROËN dealer or qualified workshop.
Practical information
Page 277 of 420
275
Lamps on the tailgateModel with LED lamps
Model with conventional bulb lamps
Identify
the
failed
bulb.
F
O
pen
the
boot.
F
R
emove
the
access
cover. F
R
emove
the
three
lamp
fixing
screws
A .
F
D
isconnect
the
lamp
connector.
F
C
arefully
r
emove
t
he
l
amp
f
rom
i
ts
h
ousing.
F
T
urn
the
bulb
holder
a
quarter
of
a
turn
a
nti-clockwise
and
pull
the
bulb
out.
F
C
hange
the
bulb.
For
reassembly,
carry
out
these
operations
in
r
everse
o
rder.
7
Practical information
Page 278 of 420
276
Direction indicator, sidelamp and
foglamp
Access is by passing a hand under the bumper.
F T urn the bulb holder a quarter of a turn and
p
ull it out.
F
C
hange the bulb.
For
reassembly carry out these operations in
r
everse
o
rder.
You
can also contact a CITROËN dealer or a
q
ualified workshop for the replacement of these
b
ulbs. For
the replacement of this type of lamp, c
ontact a CITROËN dealer or a qualified
w
orkshop.
Third brake lamp (light emitting
diodes-LED)Number plate lamps
(W5W)
To refit, press on the lens to clip it in place.
F
I
nsert a thin screwdriver into one of the
c
utouts in the the lens.
F
P
ush it outwards to unclip it.
F
R
emove the lens.
F
C
hange the faulty bulb.
Practical information
Page 279 of 420

277
Before changing a fuse:
F t he cause of the failure must be identified
a
nd
r
ectified,
F
a
ll electrical consumers must b switched
o
f f,
F
t
he vehicle must be immobilised with the
ig
nition
o
ff,
F
i
dentify the failed fuse using the tables and
l
ayout drawings in the following pages.
Changing a fuse
GoodFailed
The replacement of a fuse not shown in
t
he tables below may cause a serious
m
alfunction of your vehicle. Contact
a
CITROËN dealer or a qualified
w
orkshop. Tw e e z e r
Changing a fuse
The extraction tweezer is located in the d
ashboard f usebox c ompartment.
For
access to it:
F
o
pen the glove box,
F
u
nclip the cover by pulling at the top left,
t
hen right,
F
d
isengage the cover completely, by
c
arefully pulling in the direction indicated
b
y the arrow,
F
r
emove the tweezer.
Access to the tools
To replace a fuse, you must:
F u se the special tweezer to extract the fuse
f
rom its housing and check the condition of
it
s
f
ilament.
F
a
lways replace the failed fuse with a fuse
o
f the same rating (same colour); using a
d
ifferent rating could cause faults (risk of
f
i r e).
If
the fuse fails again soon after replacement,
h
ave the vehicle's electrical system checked by
a
CITROËN dealer or a qualified workshop.
7
Practical information
Page 280 of 420

278
CITRoËn will not accept responsibility
for the cost incurred in repairing your
v
ehicle or for rectifying malfunctions
r
esulting from the installation of
a
ccessories not supplied and not
r
ecommended by CITROËN and
n
ot installed in accordance with its
in
structions, in particular when the
combined
consumption of all of the
a
dditional equipment connected
e
xceeds
1
0
mil
liamperes.
Installing electrical
accessories
Your vehicle's electrical system is designed to operate with standard or
o
ptional
e
quipment.
Before
installing other electrical
e
quipment or accessories on your
v
ehicle, contact a CITROËN dealer or a
q
ualified
w
orkshop.
Configurations
The type of electrical system of the vehicle depends on its level of equipment.
T o identify the type of electrical system on your vehicle, open the bonnet: the presence of an
a
dditional fusebox in front of the battery indicates that it is type 2.
The
type 1 electrical system does not have any fuses in front of the battery.
Practical information