2015 Citroen C4 PICASSO wheel bolts

257
Changing a wheel
The tools are installed in the boot under the fl o o r.
Remove
  the   boot   carpet   for   access   to   them.
Access to the tools
List of tools*
Procedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
al

l of these tools are specific to your
vehicle
  and   can   vary   according   to   the   level  
o

f   equipment.   Do   not   use   them   for   other  
p

urposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   removing  
t

he   wheel   bolts.
2.
 C

hock   for   immobilising   the   vehicle   (except  
v

ersions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   cover   removal   tool.
 F

or   removing   the   finishers   on   the   heads   of  
t

he   wheel   bolts   on   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (located   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
"s

ecurity"
 b
olts.
*
  According   to   equipment.
7
Practical information

259
Changing a wheelProcedure for changing a wheel with a punctured tyre for the spare wheel using the tools provided with the vehicle.
S
ome
 
of
 
the
 
tools   are   accessible   from   inside  
t

he
 
boot.
The
 
wheel
 
chock   2 as well as the wheelbrace
extension
 6

 
are   stowed   under   the   right   hand  
b

oot
 
sill
 
trim.
The wheelbrace 1
  and   the   towing   eye   7 are
stowed
 
under
 
the   left   hand   boot   sill.
Access to the vehicle's tools*2. Wheel  chock   for   immobilising   the   vehicle  (
except   versions   with   manual   gearbox).
3.
 J

ack   with   integral   handle.
 F

or   raising   the   vehicle.
4.
 W

heel   bolt   head   cover   removal   tool.
 F

or   removing   the   wheel   bolt   head   finishers  
o

n   alloy   wheels.
5.
 S

ocket   for   the   security   bolts   (stowed   in   the  
g

love   box).
 F

or   adapting   the   wheelbrace   to   the   special  
s

ecurity   bolts.
6.
 W

heelbrace
 e
xtension.
 F

or   unscrewing/tightening   the   spare   wheel  
c

arrier   drive.
7.
 T

owing   eye.
Wheel with trim
When removing the wheel ,   detach   the   trim  f
irst   using   the   wheelbrace   1   pulling   at   the   valve  
p

assage   hole.
When refitting the wheel ,
  refit   the   trim  
s

tarting   by   placing   its   notch   facing   the   valve  
a

nd   press   around   its   edge   with   the   palm   of   your  
han

d.
List of tools*
all of these tools are specific to your vehicle
and  can   vary   according   to   equipment.   Do   not  
u

se   them   for   other   purposes.
1.
 W

heelbrace.
 F

or   removing   the   wheel   trim   and   the   wheel  
f

ixing
 bol
ts. *
  
D
epending   on   version.   A   complete   set   of   tools  
i

s   provided   with   the   spare   wheel.
The
 
other
 
tools,
 
the
 
jack
 
3
 
and
 
the
 
tool
 
for
 r
emoving
 
the
 
wheel
 
bolt
 
head
 
finishers
 
for
 
alloy
 w
heels 4 ,
 
are
 
stowed
 
in
 
a
 
box
 
attached
 
to
 
the
 
spar

e
 w

heel.
The
 
assembly
 
is
 
secured
 
under
 
the
 
vehicle
 
in
 
a

 
carrier.
(See
 
the
 
"Access
 
to
 
the
 
spare
 
wheel"
 
section).
7
Practical information

263
Removing a wheel
Parking the vehicle
Immobilise the vehicle where it does not block   traffic:   the   ground   must   be   level,  
s

table   and   not   slippery.
Apply
  the   parking   brake   unless   it   has  
b

een   programmed   to   automatic   mode,  
s

witch   off   the   ignition   and   engage   first  
g

ear*   to   block   the   wheels.
Check
  that   the   braking   warning   lamp  
a

nd   the   P   warning   lamp   in   the   parking  
b

rake   control   lever   come   on.
For
  greater   safety,   place   the   chock   2
against
  the   wheel   opposite   to   the   one  
b

eing
 c
hanged.
The
  occupants   must   get   out   of   the  
v

ehicle   and   wait   where   they   are   safe.
Never
  go   underneath   a   vehicle   raised  
u

sing   a   jack;   use   an   axle   stand.
List of operations
F Remove  the   finisher   from   from   each  o
f   bolts   using   the   tool   4   (depending   on  
e

quipment).
F
 
F
it   the   security   socket   5 on the
wheelbrace


1   to   slacken   the   security   bolt  
(

if fitted).
F
 
S
lacken   the   other   bolts   (no   more   than   a  
1

/4 turn)   using   the   wheelbrace   1  
o
n l y.
*


Position R
 
for
 
an
 
electronic
 
gearbox
 
or
 
P for
an
 
automatic
 
gearbox. Do
  not   use:
-
 
t
he   jack   for   any   purpose   other   than  
l

ifting   the   vehicle,
-
 
a
ny   other   jack   than   the   one  
s

upplied   by   the   manufacturer.
7
Practical information

265
F Remove  the   bolts   and   store   them   in   a   clean  p
lace.
F
 
R
emove   the   wheel.
Fitting a wheel
Fitting the "space-saver"
spare wheel
If your vehicle is fitted with alloy wheels, when   tightening   the   bolts   on   fitting,   it  
i

s   normal   to   notice   that   the   washers  
d

o   not   come   into   contact   with   the  
"

space-saver"   spare   wheel.   The   wheel  
i

s   secured   by   the   conical   sur face   of  
e

ach   bolt.
After changing a wheel
To correctly store the punctured wheel in   the   boot   (not in the location of the
space-saver wheel ),
  first   remove   the  
c

entral   cover.
When
  using   the   "space-saver"   type  
s

pare   wheel,   do   not   exceed   50   mph  
(

80 km/h).
Have
  the   tightening   of   the   bolts   and   the  
p

ressure   of   the   spare   wheel   checked  
b

y   a   CITROËN   dealer   or   a   qualified  
w

orkshop   without   delay.
Have
  the   punctured   wheel   repaired  
a

nd   refitted   to   the   vehicle   as   soon   as  
p

ossible.
7
Practical information

266
F Lower  the   vehicle   fully.
F  F old   the   jack   3   and   detach   it.F
 T ighten   the   security   bolt   using   the  w
heelbrace 1   fitted   with   the   security  
s

ocket 5
  (depending   on   equipment).
F
 
T
ighten   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
F

R
efit the bolt covers on each of the bolts or
the
  hub   cap   (depending   on   equipment).
F
 
S
tore   the   tools   in   the   box.
List of operations
F Put  the   wheel   in   place   on   the   hub.
F  S crew   in   the   bolts   fully   by   hand.
F
 
P
re-tighten   the   security   bolt   using   the  
w

heelbrace 1   fitted   with   the   security  
s

ocket  5
  (depending   on   equipment).
F
 
P
re-tighten   the   other   bolts   using   the  
w

heelbrace 1  
o
n l y.
Practical information

298
accessories
A wide range of accessories and genuine parts is available from the CITROËN dealer network.
T hese   accessories   and   parts   are   all   suitable   for   your   vehicle   and   benefit   from   CITROËN's   recommendation   and   warranty.
"Comfort"
Door deflectors, side window blinds, rear screen   blind,   insulated   module,   coat   hanger  
f

ixed   to   head   restraint,   mobile   reading  
l

amp,   mirror   for   caravan,   parking   sensors,  
p

rogrammable   additional   heating,   smoker's  
k

it,   solar   film   for   rear   door   windows,   portable  
s

cented   air   freshener...
"Transport systems"
boot carpet, boot liner, boot net, boot
spacers,  transverse   roof   bars,   ski   carrier,   roof  
b

oxes,   towbars,   towbar   wiring   harnesses,  
b

icycle   carriers   for   towbar   and   roof   bars,  
t

owbars   with   fixed   and   detachable   towball,  
s

eparation   net,   sliding   carrier,   boot   organiser  
(

Grand C4 Picasso)...
If
  a   towbar   and   wiring   harness   are   fitted  
o

utside   the   CITROËN   dealer   network,   the  
i

nstallation   must   be   done   strictly   in   line   with   the  
ma

nufacturer's
 r
ecommendations.
If
  your   vehicle   has   a   detachable   towball,   it   is  
r

ecommended   that   the   ball   be   removed   when  
n

ot   towing.
"Styling"
Gear lever knobs, aluminium foot rest, alloy wheels...
"Security and safety"
Anti-intrusion alarm, stolen vehicle tracking system,   child   seats   and   booster   cushions,  
b

reathalyser,   first   aid   kit,   fire   extinguisher,  
w

arning   triangle,   high   visibility   vest,   wheel  
s

ecurity   bolts,   snow   chains,   non-slip   covers,  
w

inter   tyres,   foglamp   kit,   security   film   for   front  
d

oor   windows,   dog   guard,   pet   seat   belt...
"Protection"
Mats*, seat covers compatible with lateral airbags,   mud   flaps,   door   protective   mouldings,  
b

umper   protection   strips,   vehicle   cover,   boot  
s

ill   protector,   door   sill   protectors,   seat   and   boot  
p

rotective   covers   for   pets...
The
  rear   bodywork   has   been   designed   to   avoid  
s

p r ay.
*
 
T
o   avoid   any   risk   of   jamming   the   pedals:
-
 
e
nsure   that   mats   are   correctly   positioned  
a

nd   secured,
-
 
n
ever   fit   one   mat   on   top   of   another.
Practical information