Page 241 of 420

239
(a ) Universal child seat: child seat which can be i
nstalled in all vehicles using the seat belt.
( b )
G
roup 0: from birth to 10 kg. Infant car seats
a
nd "car cots" cannot be installed on the
f
ront passenger seat or in the 3
rd row. When i
nstalled
in
the
2nd row, they may prevent u
se
of
the
other
seats.
( c )
C
onsult
the
legislation in force in your
c
ountry
before
installing your child on this
sea
t.
( d )
T
o
install
a
child
seat on a rear seat,
r
ear ward
facing
or for ward facing, move
t
he
front
seat
for ward, then straighten the
b
ackrest
to
allow
enough space for the child
s
eat
and
the
child's legs.
( e )
T
o
install
a
child
seat on a rear seat,
r
ear ward
facing
or for ward facing, adjust the
r
ear
seat
to
the
fully back position, with the
b
ackrest
upright. Remove
and stow the head restraint
b
efore installing a child seat on a
p
assenger seat. Refit the head restraint
o
nce the child seat has been removed.
U
:
s
eat suitable for the installation of a child
s
eat secured using the seat belt and
u
niversally approved rear ward facing and/
or for ward facing, with the passenger seat
a
djusted to the midway longitudinal position.
U(R) : s ame as U
, with the passenger's s
eat adjusted to the low position
w
ith 11 actions on the height control lever
a
nd in the midway longitudinal position.
6
Safety
Page 242 of 420

240
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISoFI X regulations .
The seats, represented below, are fitted with regulation ISOFIX mountings:
-
t
wo rings A,
located between the vehicle
s
eat back and cushion, indicated by a
m
arking, -
a
ring B,
located under a cover on the back of
t
he top of the seat backrest, referred to as the
T
OP TETHER for fixing the upper strap.
I
ts position is indicated by a marking.
Located
on the back of the seat backrest, the
t
op tether is used to secure the upper strap of
c
hild seats that have one. This device limits
f
or ward tipping of the child seat, in the event of
a
front impact.The
incorrect installation of a child seat
i
n a vehicle compromises the child's
p
rotection in the event of an accident.
Observe
strictly the fitting instructions
p
rovided with the child seat.
For
information on the possibilities
f
or fitting ISOFIX child seats to your
v
ehicle, refer to the table of seating
p
ositions.
The ISOFIX mountings are three rings for each seat:
This ISOFIX mounting system ensures fast, reliable and safe fitting of the child seat in your
v
ehicle.
The ISOFIX child seats
are fitted with two
l
atches which are secured easily on the two
r
ings
A .
S
ome also have an upper strap
(or top tether)
w
hich is attached to ring B. To
secure the child seat to the TOP TETHER
:
-
r
emove and stow the head restraint before
i
nstalling the child seat on this seat (refit it
a
fter the child seat has been removed),
-
r
emove the TOP TETHER cover by pulling
a
t its cut-out,
-
p
ass the child seat strap behind the seat
b
ackrest, centred between the holes for the
h
ead restraint rods,
-
s
ecure the upper strap fixing to the ring B,
-
t
ighten the upper strap.
Safety
Page 243 of 420
241
ISOFIX child seats recommended by CITROËN
"RÖMER Baby- Safe Plus and its Baby- Safe Plus ISOFIX base" (size category: E)
G roup 0+: from bir th to 13 kg
Installed
rear ward facing using an ISOFIX base which is attached to the rings A.
The
base has a support leg, adjustable for height, which sits on the vehicle's floor.
This
seat can be secured with a seat belt. In this case, only the shell is used and attached to the
v
ehicle's seat by the three-point seat belt.
Baby P2C Mini and its ISOFIX base
(size categories: C, D, E)
Group 0+: from bir th to 13 kg
Installed
rear ward facing using an ISOFIX base which is attached to the anchorage rings A.
The
base has a support leg, adjustable for height, which sits on the vehicle's floor.
This
seat can also be secured with a seat belt. In this case only the seat shell is used.
6
Safety
Page 244 of 420
242
Follow the instructions for fitting child seats contained in the seat manufacturer's installation guide.Baby P2C Midi and its ISOFIX base (size categories: D, C, A, B, B1
)
Group 1: from 9 to 18 kg
Installed rear ward facing using an ISOFIX base which is attached to the rings A
.
T
he base has a support leg, adjustable for height, which sits on the vehicle's floor.
This child seat can also be used for ward facing.
This seat can not
be secured with a seat belt.
We recommend that you use the seat in the rear ward facing position up to the age of 3 years.
Safety
Page 245 of 420

243
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G,
is indicated on the child
s
eat next to the ISOFIX logo. Weight of the child
/ indicative age
Less than 10 kg (group 0)
Up
to approx.
6 m
onthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
to approx. 1 yearFrom 9 to 18 kg (group 1)
From
approx. 1 to 3 years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
p
assenger
sea
t
n
ot IS
o
FIX
Outer
rear seats, fixed IL- SU**IL- SUIL- SUX IUF / IL- SU
Outer
r
ear
s
eats,
a
djustable
l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU
(1) IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
*
Sleeper cots cannot be fitted to the front passenger's seat. **
T
he ISOFIX sleeper cot, secured to the lower rings of an ISOFIX seat,
o
ccupies the full width of the rear seats.
6
Safety
Page 246 of 420
244
I UF: seat suitable for the installation of an
ISoFI X Universal seat, " For ward
facing"
s
ecured using the upper strap to the top
t
ether on ISOFIX seats.
IL- SU:
s
eat suitable for the installation of an
I sofix
Semi- Universal
sea
t
ei
ther:
-
r
ear ward facing fitted with an upper strap
o
r a support leg,
-
f
or ward facing fitted with a support leg,
-
a
sleeper cot fitted with an upper strap or a
s
upport leg.
Remove
and stow the head restraint
b
efore installing a child seat on a
p
assenger seat. Refit the head restraint
o
nce the child seat has been removed.
For
advice on securing the upper strap, refer to
t
he "Isofix Mountings" section.
X:
s
eat not suitable for the installation of a
child
seat or sleeper cot for the weight group
i
ndicated.
(1) :
T
he outer seat in row 2 must be adjusted
t
o 3 notches back from the fully for ward
p
osition.
Safety
Page 247 of 420

245
Locations for installing ISOFIX child seats
In accordance with European Regulations, this table indicates the options for installing ISOFIX child seats on seats in the vehicle fitted with ISOFIX mountings.
In
the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G,
is indicated on the child
s
eat next to the ISOFIX logo.
*
Sleeper cots cannot be fitted to the front passenger's seat.**
A
n ISOFIX sleeper cot, secured to the lower rings of an ISOFIX seat,
o
ccupies the full width of the rear seats.
Weight of the child
/ indicative age
Less than 10 kg (group 0)
Up
to approx.
6 m
onthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
Up
to approx. 1 yearFrom 9 to 18 kg (group 1)
From
approx. 1 to 3 years
Type of ISOFIX child seat Sleeper cot*rearward facing rearward facing forward facing
ISOFIX size categor y F G C D E C D A B B1
Front
p
assenger
sea
t
n
ot IS
o
FIX
Outer
rear seats, fixed IL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Outer
r
ear
s
eats,
a
djustable
l
ongitudinallyIL- SU**IL- SUIL- SUIUF / IL- SU IUF / IL- SU
Centre rear seat XIL- SU IL- SUIUF / IL- SU IUF / IL- SU
Rear
seat in the 3
rd rown ot ISo FIX
6
Safety
Page 248 of 420
246
I UF: seat suitable for the installation of an
ISoFI X Universal seat, " For ward
facing"
s
ecured using the upper strap to the top tether
o
n ISOFIX seats.
IL- SU: seat suitable for the installation of an
I sofix
Semi- Universal
sea
t
ei
ther:
-
r
ear ward facing fitted with an upper strap
o
r a support leg,
-
f
or ward facing fitted with a support leg,
-
a
sleeper cot fitted with an upper strap or a
s
upport leg.
Remove
and stow the head restraint
b
efore installing a child seat on a
p
assenger seat. Refit the head restraint
o
nce the child seat has been removed.
For
advice on securing the upper strap, refer to
t
he "Isofix Mountings" section.
X: seat not suitable for the installation of a
child
seat or sleeper cot for the weight group
i
ndicated.
Safety