2015 Citroen C4 PICASSO Owner's Manual

39
Warning / indicator lampState CauseAction / Observations
+
+ SCR emissions
control system

(BlueHDi Diesel) fixed,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied
 b
y
 an a
udible
 s
ignal
 an
d
 a

  message. A
  fault   with   the   SCR   emissions   control  
s

ystem   has   been   detected.This
  alert   disappears   once   the  
e

xhaust   emissions   return   to   normal  
l

evels.
flashing,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied
 b
y
 an a
udible
 s
ignal
 an
d
 a

  message   indicating   the   remaining  
d

riving
 r
ange.After
  confirmation   of   the   fault   with   the  
e

missions   control   system,   you   can  
d

rive   for   up   to   650   miles   (1   100   km)  
b

efore   the   engine   starting   inhibition  
s

ystem   is   triggered.Contact
  a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop
 w
ithout delay, to
avoid a breakdown .
flashing,
  on   switching   on   the   ignition,  
a

ssociated   with   the   SERVICE   and  
e

ngine   diagnostic   warning   lamps,  
a

ccompanied
 b
y
 an a
udible
 s
ignal
 an
d
 a

  message. You
  have   exceeded   the   authorised  
d

riving   limit   following   confirmation  
o

f   a   fault   with   the   emissions   control  
s

ystem:   the   engine   starting   inhibition  
s

ystem   prevents   starting   of   the  
e

ngine.To
  be   able   to   start   the   engine,   you  
m

ust
 
call   on   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
1
Monitoring

40
Service indicator
System which informs the driver when the next   service   is   due,   in   accordance   with   the  
ma

nufacturer's
 ser
vice
 s
chedule.
The
  point   at   which   the   service   is   due   is  
c

alculated   from   the   last   indicator   zero   reset,  
a

ccording   to   the   mileage   covered   and   the   time  
e

lapsed   since   the   last   service.
For
  BlueHDi   Diesel   versions,   depending   on   the  
c

ountry   of   sale,   the   degree   of   deterioration   of  
t

he   engine   oil   may   also   be   taken   into   account.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service information   appears   in   the   screen.
Less than 600 miles (1 000 km)
remain before the next service is due
Example: 560   miles   (900   km)   remain   before  t
he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,  
t

he   screen   indicates:
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the spanner s ymbolising t he ser vice o perations c omes o

n.   The   distance   recorder   display   line   indicates   the
 d

istance   remaining   before   the   next   service   is   due.
Example:
 

1   700   miles   (2   800   km)   remain   before
 t

he   next   service   is   due.
For
  5   seconds   after   the   ignition   is   switched   on,   the
 s

creen   indicates:
5
  seconds   after   the   ignition   is   switched   on,  
t

he spanner goes off ;
  the   distance   recorder  
r

esumes   its   normal   operation.   The   screen   then  
i

ndicates   the   total   and   trip   distances.5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on to
indicate
  that   a   service   must   be   carried   out  
s

oon.
Monitoring

41
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes  to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   180   miles  
(

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates: Therefore,
  the   spanner   may   come   on  
i

f   you   have   exceeded   the   period   since  
t

he   last   service,   as   indicated   in   the  
ma

nufacturer's
 ser
vice
 s
chedule.
For
b
l
ueH
di
d
i
esel versions, the
spanner
  may   also   come   on   early,  
a

ccording   to   the   level   of   deterioration  
o

f   the   engine   oil,   which   depends   on   the  
d

riving   conditions   in   which   the   vehicle  
i

s   used.
5
  seconds   after   the   ignition   is   switched   on,  
t

he   distance   recorder   resumes   its   normal  
ope

ration.
 T
he spanner remains on .
With
b
l
ueH
di
d
i
esel versions, the Service
warning
  lamp   also   comes   on   when   the   ignition  
i

s   switched   on.
1
Monitoring

42
Service indicator zero resetFollowing this operation, if you wish to disconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   registered.
After
 
each
 
service,
 
the
 
service
 
indicator
 
must
 
b

e
 
reset
 
to
 
zero.
If
 
you
 
have
 
carried
 
out
 
the
 
service
 
on
 
your
 
v

ehicle
 y

ourself:
F
 
s

witch
 
off
 
the
 
ignition,
F
 
p

ress
 
and
 
hold
 
the
 
trip
 
distance
 
recorder
 
z

ero
 
reset
 
button,
F
 
s

witch
 
o

n
 
t

he
 
i

gnition;
 
t

he
 
d

istance
 
r

ecorder
 
d

isplay
 
begins
 
a
 
countdown,
F
 
w

hen
 
the
 
display
 
indicates
 
"=0" , release
the
 
button;
 
the
 
spanner
 
disappears.Retrieving the service
information
You can access the service information at any t ime.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.
Monitoring

43
Engine oil level indicator*
On versions fitted with an electric oil level indicator,   the   state   of   the   engine   oil   level   is  
d

isplayed   in   the   instrument   panel   for   a   few  
s

econds,   after   the   servicing   information.
The
  level   read   will   only   be   correct   if  
t

he   vehicle   is   on   level   ground   and   the  
e

ngine   has   been   off   for   more   than  
3

0 minutes.
Oil level correct
Oil level incorrect
This is indicated by the display of the message "Oil   level   incorrect"   in   the   instrument   panel  
s

creen,   accompanied   by   the   service   warning  
l

amp   and   an   audible   signal.
If
  the   low   oil   level   is   confirmed   by   a   check   using  
t

he   dipstick,   the   level   must   be   topped   up   to  
a

void   damage   to   the   engine.
Refer
  to   the   "Checking   levels"   section.
Oil level indicator fault
This is signalled by the display of the message "Oil level   measurement   invalid"   in   the   instrument   panel.
Contact
  a   CITROËN   dealer   or   a   qualified
 w

orkshop.
In the event of a fault with the electric indicator, the   oil   level   is   no   longer   monitored.
If
  the   system   is   faulty,   you   must   check   the  
e

ngine   oil   level   using   the   manual   dipstick  
l

ocated   under   the   bonnet.
Refer
  to   the   "Checking   levels"   section.
* Depending on version.
1
Monitoring

44
Distance recorders
The total and trip distances are displayed for thirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
When
  travelling   abroad,   you   may  
h

ave   to   change   the   units   of   distance:  
t

he   display   of   road   speed   must   be   in  
t

he   official   units   (miles   or   km)   for   the  
c

ountry.   The   change   of   units   is   done   via  
t

he   screen   configuration   menu,   with   the  
v

ehicle   stationary.
Trip distance recorder
It measures the distance travelled since it was reset   to   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Total distance recorder
It measures the total distance travelled by the vehicle   since   its   first   registration.
Monitoring

45
Lighting dimmer control
Allows the manual adjustment of the brightness of the instrument panel and touch screen tablet to suit   the   ambient   light   level.
Operates
  only   when   the   vehicle   lighting   is   on,   with   the   exception   of   the   daytime   running   lamps.
Tw o b u t t o n s
With the headlamps on, press button A to
i ncrease   the   brightness   of   the   instruments   and  
c

ontrols   and   the   interior   mood   lighting   or  
button B
  to   reduce   it.
As
  soon   as   the   lighting   reaches   the   required  
l

evel   of   brightness,   release   the   button.
Touch screen tablet
F Press on the "Configuration"   menu.
F  A djust   the   brightness   by   pressing   on  
t

he "+ " or " -"
  buttons.
1
Monitoring

46
When driving at night, this function allows certain   displays   in   the   instrument   panel   to  
b

e   switched   off   to   avoid   visual   fatigue   for   the  
d

river.
The
  essential   information,   such   as   the   speed   of  
t

he   vehicle   or   the   cruise   control   or   speed   limiter  
i

ndications   remains   displayed   in   the   instrument  
pan

el.
Using the steering mounted
control
F With   the   vehicle   lighting   on,   press   this  b
utton   again   to   activate   the   black   panel.
F
 
P
ress   this   button   again   to   deactivate   it.
Black screen (touch screen tablet)Black panel (comfortable
night driving display)
F Press on the "Configuration"   menu.
F P ress the " Turn off screen "
  button.   The  
s

creen   in   the   touch   screen   tablet   goes   off.
F
 
P
ress   the   screen   again   (anywhere   on   its  
s

ur face)   to   switch   it   on   again.
Monitoring