WASHER NOZZLE & TUBEWW-57
< REMOVAL AND INSTALLATION >
C
D E
F
G H
I
J
K
M A
B
WW
N
O P
3. Remove the hood insulator. Refer to DLK-170, "HOOD ASSEMBLY : Exploded View".
4. Disconnect the washer tube from the washer nozzles (LH/RH).
5. Remove the front under cover. Refer to EXT-28, "Removal and Installation"
.
6. Remove the fender protector (RH). Refer to EXT-26, "FENDER PROTECTOR : Removal and Installation"
.
7. Disconnect the washer tube from the washer pump.
8. Remove the washer tube.
Installation
Installation is in the reverse order of removal.
NOTE:
Fill washer tank with specified amount of fluid. Refer to WW-66, "Specifications"
.
REAR WASHER TUBE (IF EQUIPPED)
Removal
1. Drain the washer fluid.
2. Remove trunk lid finisher. Refer to INT-33, "TRUNK LID FINISHER : Removal and Installation"
.
3. Disconnect the rear washer tube (1 ) from rear view camera (2).
4. Remove rear seat bolster (RH). Refer to SE-38, "Removal and Installation - Rear Seat Bolster"
.
5. Remove seatback latch finisher. Refer to INT-26, "Exploded View"
.
6. Remove rear kicking plate inner (RH). Refer to INT-22, "REAR KICKING PLATE : Removal and Installa-
tion - Inner".
7. Remove center pillar lower finisher (RH). Refer to INT-23, "CENTER PILLAR LOWER FINISHER :
Removal and Installation".
8. Remove front kicking plate inner (RH). Refer to INT-21, "FRONT KICKING PLATE : Removal and Installa-
tion - Inner".
9. Remove dash side finisher (RH). Refer to INT-20, "DASH SIDE FINISHER : Removal and Installation"
.
10. Remove fender protector (RH). Refer to EXT-26, "FENDER PROTECTOR : Removal and Installation"
.
11. Disconnect the rear washer tube from the washer pump.
12. Remove rear washer tube.
Installation
Installation is in the reverse order of removal.
NOTE:
Fill washer tank with specified amount of fluid. Refer to WW-66, "Specifications"
.
ALOIA0202ZZ
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM
WW-66
< SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS)
SpecificationsINFOID:0000000009464645
WINDSHIELD WASHER FLUID
Windshield washer fluid capacity4.5 (4 3/4 US qt, 4 Imp qt)
Windshield washer fluid specification Refer to MA-11, "FOR USA AND CANADA : Fluids and Lubricants"
.
Revision: November 20132014 Altima NAMRevision: November 20132014 Altima NAM
