2014.5 Citroen C4 Owner's Manual

08
343
Depending
 
on
 
your
 
telephone,
 
you
 
may
 
be
 
asked
 
to
 
accept
 
automatic

 
connection
 
every
 
time
 
the
 
ignition
 
is
 
switched
 
on.
Depending
 
on
 
the
 
type
 
of
 
telephone,
 
the
 
system
 
will

 
ask
 
you
 
to
 
accept
 
or
 
not
 
the
 
transfer
 
of
 
your
 
contacts. The

 
services
 
available
 
depend
 
on
 
the
 
network,
 
the
 
SIM
 
card
 
and
 
the
 
compatibility

 
of
 
the
 
Bluetooth
 
telephone
 
used.
 
Check
 
the
 
telephone
 
manual

 
and
 
with
 
your
 
network
 
provider
 
for
 
details
 
of
 
the
 
services
 
available

 
to
 
you.
On
 
return
 
to
 
the
 
vehicle,
 
the
 
last
 
telephone
 
connected
 
automatically
 
reconnects,

 
within
 
around
 
30
 
seconds
 
after
 
switching
 
on
 
the
 
ignition
 
(Bluetooth

 
activated).
To
 
modify
 
the
 
automatic
 
connection
 
mode,
 
select
 
the
 
telephone
 
in
 
the

 
list
 
then
 
select
 
the
 
desired
 
profile.
The
 
telephone
 
is
 
added
 
to
 
the
 
list.
BLUETOOTH
If not, select "
Update".
The   ability   of   the   system   to   connect   with   only   one   profile   depends   on  
the

  telephone.  
The
  two   profiles   may   both   connect   by   default.
Visit   www.citroen.co.uk   for   more   information   (compatibility,   additional  
help,

  ...).
Automatic reconnection
Connecting a Bluetooth peripheral
On switching on the ignition, the telephone connected when the ignition
  was   last   switched   off   is   automatically   reconnected,   if   this  
connection

  mode   had   been   activated   during   the   pairing   procedure.
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.
Press on Telephone
  to   display   the   primary  
page

  then   go   to   the   secondary   page.
Manual connection
Select "Bluetooth"
  to   display   the   list   of   paired  
peripherals.
Select

  the   peripheral   to   connect.
Press on "Search".
The
  connection   is   confirmed   by   the   display   of   a  
message

  and   the   name   of   the   telephone.

08
Receiving a call
An incoming call is announced by a ring and a superimposed display in  the   screen.
Make
  a   short   press   on   the   steering   mounted  
TEL

  button   to   accept   an   incoming   call.
Make
  a   long   press   on   the   steering   mounted  
TEL

  button   to   reject   the   call.
or
Select "End call".
Managing paired telephones
Press on Telephone to display the primary page   then   go   to   the   secondary   page.
Select "Bluetooth"
  to   display   the   list   of   paired  
peripheral

  devices.
Select
  the   peripheral   in   the   list.
Select:
-
 
"
Search" or "Disconnect" to connect or
disconnect
  the   Bluetooth   connection   with  
the

  peripheral   selected.
-
 
"
Delete"   to   remove   the   pairing.
BLUETOOTH
344This   function   allows   the   connection   or   disconnection   of   a   peripheral  
device

  as   well   as   the   deletion   of   a   pairing.

08
345
Press on Telephone
 
to
 
display
 
the
 
primary
 
page.
Calling a new number
Calling a contact
Making a callUse of the telephone is not recommended while driving. W
e   recommended   that   you   park   safely   or   make   use   of   the  
steering

  mounted   controls.
Enter
 
the
 
phone
 
number
 
using
 
the
 
keypad
 
then
 
"

Call"
 
to
 
start
 
the
 
call.
Press on Telephone
 
to
 
display
 
the
 
primary
 
page.
Select "

Contacts".
Select
  the   desired   contact   from   the   list   offered.
Select "Call".
CONTACTS
Or make a long press on the steering mounted TEL   button.

08
346Calling a recently used number
Ending a call
It is always possible to make a call directly from the telephone; park the
  vehicle   first   as   a   safety   measure.
Select "Call log
".
Press on Telephone   to   display   the   primary  
page.
Select

  the   desired   contact   from   the   list   offered. Select "End call".
CALL
LOG
or
Make
 
a
 
long
 
press
 
on
 
the
 
steering   mounted  
TEL

 
button.

08
347
Ringtones
Select "Telephone Options".
Press on Telephone   to   display   the   primary  
page

  then   go   to   the   secondary   page.
Select "Ringtones".
You
  can   select   the   ringtone   used   and   adjust   its   volume.Select "Contacts". Press on Telephone
  to   display   the   primary  
page.
Select "

Add contact".
Select:
-
 
"
New"   to   add   a   new   contact.
-
 
"
Modify"   to   edit   the   selected   contact.
-
 
"
Delete"   to   delete   the   selected   contact.
-
 
"
Delete all"   to   delete   all   of   the   information  
for

  the   selected   contact.
Select "Confirm". Select "Directory information"
  for   the   number  
of

  entries   used,   available,   ...
Managing contacts / Entries
SETTINGS

The following table groups together the answers to the most frequently asked questions concerning your audio system.
FREqUENTLY ASKED q UESTIONS
348
q
UESTION
ANSWER SOLUTION
Navigation, guidance
The route calculation is
not   successful.
The   guidance   criteria   may   conflict   with   the   current   location   (exclusion   of  
toll

  roads   on   a   toll   motorway).
Check   the   guidance   criteria   on   the   Navigation  
Menu,

  "Guidance   options"\   "Define   calculation  
criteria".
I
  am   unable   to   enter   my  
post

  code.
The   system   only   accepts   post   codes   of   up   to   5   characters.
The   POIs   do   not   appear. The   POIs   have   not   been   selected.
Select   the   POIs   in   the   list   of   POIs.
The   risk   areas   audible  
warning

  does   not   work.
The   audible   warning   is   not   active.
Activate   audible   warnings   in   the   Guidance   options  
menu,

  "Navigation   -   guidance",   "Set   parameters  
for

  risk   areas".
The   system   does   not  
suggest

  a   detour   around  
an

  incident   on   the   route.
The   guidance   criteria   do   not   take   account   of  
TMC
  messages.
Select   the   "Traffic   info"   function   in   the   list   of  
guidance

  criteria.
I   receive   a   Risk   area   alert  
which

  is   not   on   my   route.
Other   than   guidance,   the   system   announces   all   Risk   areas   positioned   in   a  
cone

  located   in   front   of   the   vehicle.   It   may   provide   an   alert   for   a   Risk   area  
located

  on   nearby   or   parallel   roads.
Zoom   in   on   the   map   to   view   the   exact   position   of  
the

  Risk   area.   Select   "On   the   route"   to   no   longer  
receive

  alerts   other   than   guidance   or   to   reduce   the  
time

  for   the   announcement.

FREqUENTLY ASKED q UESTIONS
349
q

UESTION
ANSWER SOLUTION
Certain
 
traffic
 
jams
 
along

 
the
 
route
 
are
 
not
 
indicated

 
in
 
real
 
time.
On
 
starting,
 
it
 
is
 
several
 
minutes
 
before
 
the
 
system
 
begins
 
to
 
receive
 
the
 
traffic

 
information.
Wait
 
until
 
the
 
traffic
 
information
 
is
 
being
 
received  
correctly

 
(display
 
of
 
the
 
traffic
 
information
 
icons
 
on  
the

 
map).
The
 
filters
 
are
 
too
 
restrictive.
Modify
 
the
 
"Geographic
 
filter"
 
settings.
In
 
certain
 
countries,
 
only
 
major
 
routes
 
(motorways...)
 
are
 
listed
 
for
 
the
 
traffic

 
information.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is
 
dependent

 
on
 
the
 
traffic
 
information
 
available.
The
 
altitude
 
is
 
not
 
displayed.
On

 
starting,
 
the
 
initialisation
 
of
 
the
 
GPS
 
may
 
take
 
up
 
to
 
3
 
minutes
 
to
 
receive

 
more
 
than
 
4
 
satellites
 
correctly.
Wait
 
until
 
the
 
system
 
has
 
started
 
up
 
completely.
 
Check

 
that
 
there
 
is
 
a
 
GPS
 
coverage
 
of
 
at
 
least
 
4 satellites

 
(long
 
press
 
on
 
the
 
SETUP
 

button,
 
then  
select

 
"GPS
 
coverage").
Depending
 
on
 
the
 
geographical
 
environment
 
(tunnel...)
 
or
 
the
 
weather,
 
the

 
conditions
 
of
 
reception
 
of
 
the
 
GPS
 
signal
 
may
 
vary.
This
 
phenomenon
 
is
 
normal.
 
The

 
system
 
is

 
dependent
 
on
 
the
 
GPS
 
signal
 
reception
 
conditions.
T

elephone, Bluetooth
I
 
cannot
 
connect
 
my
 
Bluetooth

 
telephone.
The
 
telephone's
 
Bluetooth
 
function
 
may
 
be
 
switched
 
off
 
or
 
the
 
telephone
 
may

 
not
 
be
 
visible.
-
 
Check

 
that
 
your
 
telephone's
 
Bluetooth
 
function

 
is
 
switched
 
on.
-
 
Check

 
in
 
the
 
telephone
 
settings
 
that
 
it
 
is
 
"visible

 
to
 
all".
The
 
Bluetooth
 
telephone
 
is
 
not
 
compatible
 
with
 
the
 
system.
You
 
can
 
check
 
the
 
compatibility
 
of
 
your
 
telephone  
at

 
www.citroen.co.uk
 
(services).
The
 
volume
 
of
 
the
 
telephone

 
connected
 
in

 
Bluetooth
 
mode
 
is
 
inaudible.
The

 
volume
 
depends
 
both
 
on
 
the
 
system
 
and
 
on
 
the
 
telephone.
Increase
 
the
 
volume
 
of
 
the
 
audio
 
system,
 
to
 
maximum

 
if
 
required,
 
and
 
increase
 
the
 
volume
 
of  
the

 
telephone
 
if
 
necessary.
The
 
ambient
 
noise
 
level
 
has
 
an
 
influence
 
on
 
the
 
quality
 
of
 
telephone
 
communication.
Reduce

 
the
 
ambient
 
noise
 
level
 
(close
 
the
 
windows,
 reduce

 
the
 
booster
 
fan
 
speed,
 
slow
 
down, ...).

FREqUENTLY ASKED q UESTIONS
350
q
UESTION
ANSWER SOLUTION
Some   contacts   are  
duplicated

  in   the   list.
The   options   for   synchronizing   contacts   are   synchronizing   the   contacts  
on

  the   SIM   card,   the   contacts   on   the   telephone,   or   both.   When   both  
synchronizations

  are   selected,   some   contacts   may   be   duplicated.
Select   "Display   SIM   card   contacts"   or   "Display  
telephone

  contacts".
Contacts are not shown
in   alphabetical   order.
Some   telephones   offer   display   options.   Depending   on   the   settings  
chosen,

  contacts   can   be   transferred   in   a   specific   order.
Modify   the   display   setting   in   the   telephone  
directory

.
The system does not receive
 SMS  text  messages.The Bluetooth mode does not permit sending SMS text messages to the system.
CD, MP3
The
 
CD
 
is
 
ejected
 
automatically

 
or
 
is
 
not
 
played

 
by
 
the
 
player. The
  CD   is   inserted   upside   down,   is   unplayable,   does   not   contain   any  
audio

  data   or   contains   an   audio   format   which   the   player   cannot   play.-
 
Check
  that   the   CD   is   inserted   in   the   player   the  
right

  way   up.
-
 
Check
  the   condition   of   the   CD:   the   CD   cannot  
be

  played   if   it   is   too   damaged.
-
 Check

  the   content   in   the   case   of   a   recorded
 CD:

  refer   to   the   advice   in   the   "AUDIO"   section.
-
 
The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by the audio system  because   they   are   not   of   the   correct   quality.
The CD has been recorded in a format that is not compatible with the player  (udf, ...).
The
  CD   is   protected   by   an   anti-pirating   protection   system   which   is   not  
recognised

  by   the   audio   system.
There is a long waiting period  following   the   insertion of a C

d or connection of a
USB
  memory   stick.When a new medium is inserted, the system reads a certain amount of data  (directory,   title,   artist,   etc.).  This   may   take   from   a   few   seconds   to   a  
few

  minutes. This
  phenomenon   is   normal.
The
 
CD
 
player
 
sound
 
is
 
poor

. The
  CD   used   is   scratched   or   of   poor   quality. Insert
  good   quality   CDs   and   store   them   in   suitable  
conditions.
The

  audio   equipment   settings   (bass,   treble,   ambiences)   are   unsuitable. Set   the   treble   or   bass   level   to   0,   without   selecting  
an

  ambience.