2014.5 Citroen C4 Owner's Manual

207
Running out of fuel (Diesel)
1.6 HDi engine2.0 HDi engineOn vehicles fitted with HDi engines, the fuel s
ystem   must   be   primed   if   you   run   out   of   fuel;  
r

efer   to   the   corresponding   engine   compartment  
v

iew.
If
  the   tank   on   your   vehicle   is   fitted   with   a  
m

isfuel   prevention   device,   refer   to   the   "Misfuel  
p

revention
 (
Diesel)"
 s
ection.
BlueHDi 100, 115 and
120

engines
If the engine does not start first time, d
on't   keep   trying   but   start   the   procedure  
a

gain   from   the   beginning. F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
d

iesel.
F  
O
pen   the   bonnet.
F  
I
f   necessary,   unclip   the   styling   cover   for  
a

ccess   to   the   priming   pump.
F  
S
queeze   and   release   the   priming   pump  
r

epeatedly   until   resistance   is   felt   (there  m
ay   be   resistance   at   the   first   press).
F  O perate   the   starter   until   the   engine   starts  
(

if   the   engine   does   not   start   at   the   first  
a

ttempt,   wait   around   15   seconds   before  
t

rying
 ag
ain).
F
 
I
f   the   engine   does   not   start   after   a   few  
a

ttempts,   operate   the   priming   pump   again  
t

hen   start   the   engine.
F
 
R
efit   the   styling   cover   and   clip   it   in   place.
F
 
C
lose   the   bonnet.F
 
F
ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F  
O
pen   the   bonnet.
F
I
f necessary, unclip the style cover for
access   to   the   priming   pump.
F  
S
lacken   the   bleed   screw.
F  
S
queeze   and   release   the   priming   pump  r
epeatedly   until   fuel   appears   in   the  t
ransparent p ipe.
F
 
T
ighten   the   bleed   screw.
F
 
O
perate   the   starter   until   the   engine   starts  
(

if   the   engine   fails   to   start   at   the   first  
a

ttempt,   wait   around   15 seconds   before  
t

rying
 ag
ain).
F
 
I
f   the   engine   fails   to   start   after   a   few  
a

ttempts,   operate   the   priming   pump   again,  
t

hen   the   starter.
F
 
P
ut   the   style   cover   back   in   position   and  
c

lip   it   in   place,   ensuring   that   it   has   clipped  
c

o r r e c t l y.
F
 
C
lose   the   bonnet.
F
 
F

ill   the   fuel   tank   with   at   least   five   litres   of  
D

iesel.
F
 
S

witch   on   the   ignition   (without   starting   the  
e

ngine).
F
 
W

ait   around   6   seconds   and   switch   off   the  
ig

nition.
F
 
R

epeat   the   operation   10   times.
F
 
O

perate   the   starter   to   run   the   engine.
10
Checks

208
bonnet
F Push  the   exterior   safety   catch   B to the left
and   raise   the   bonnet.
Opening
F Open  the   front   left   door.
F P ull the interior bonnet release lever A,
located
  at   the   bottom   of   the   door   aperture.
F
 
U
nclip   the   stay   C   from   its   housing   on   the  
b

ack   of   the   bonnet.
F
 
F
ix   the   stay   in   the   notch   to   hold   the   bonnet  
ope

n.
Closing
F Take  the   stay   out   of   the   support   notch.
F  C lip   the   stay   in   its   housing   on   the   back   of  
t

he   bonnet.
F
 
L
ower   the   bonnet   and   release   it   at   the   end  
o

f   its   travel.
F
 
P
ull   on   the   bonnet   to   check   that   it   is  
s

ecured
 c
orrectly.
The cooling fan may star t after switching
off the engine: take care with ar ticles and
clothing that might be caught by the fan
blades.
Before
 
doing
 
anything
 
under
 
the
 
b

onnet, switch off the Stop & Start
system
 
to
 
avoid
 
any
 
risk
 
of
 
injury
 
r

esulting
 
from
 
an
 
automatic
 
c

hange
 t

o
 S

TART
 
mode.
Do  not   open   the   bonnet   in   high   winds.
When   the   engine   is   hot,   handle   the  
e

xterior   safety   catch   and   the   bonnet  
s

tay   with   care   (risk   of   burns).
be

cause of the presence of electrical
equipment   under   the   bonnet,   it   is  
r

ecommended   that   exposure   to   water  
(

rain,   
w
ashing,   ...)   be   limited.
The location of the interior bonnet
release
 
lever
 
prevents
 
opening
 
of
 
t

he
 
bonnet
 
while
 
the
 
front
 
left
 
door
 
is
 
c

losed.
Checks

209
Petrol engines
The various caps and covers allow access for checking   the   levels   of   the   various   fluids   and   for r

eplacing   certain   components.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10
Checks

210
* According to engine.
Diesel engines
The various caps and covers allow access for checking   the   levels   of   the   various   fluids,   for  
r

eplacing   certain   components   and   for   priming  
t

he   fuel   system.
1.
 P

ower
 s
teering
 r
eservoir.
2.
 S

creenwash   and   headlamp   wash   reservoir.
3.
 C

oolant
 r
eservoir.
4.
 B

rake   fluid   reservoir.
5.
 B

attery/Fuses.
6.
 F

usebox.
7.
 A

ir   filter.
8.
 E

ngine   oil   dipstick.
9.
 E

ngine   oil   filler   cap.
10.
 P

riming
 pu
mp*.
11.
 B

leed   screw*.
Checks

211
Checking levels
The check is carried out either when the   ignition   is   switched   on   using   the  
o

il   level   indicator   in   the   instrument  
p

anel   for   vehicles   so   equipped,   or  
u

sing   the   dipstick.
Engine oil level
Checking using
the dipstick
Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless other wise indicated.
I f   a   level   drops   significantly,   have   the   corresponding   system   checked   by   a   CITROËN   dealer   or   a   qualified   workshop.
It
  is   normal   to   top   up   the   oil   level   between  
t

wo   services   (or   oil   changes).   CITROËN  
r

ecommends   that   you   check   the   level,   and   top  
u

p   if   necessary,   every   3   000   miles   (5   000   kms).A
  =   MA X
B
  =   MINIf
  you   find   that   the   level   is   above   the   A   mark   or  
belo

w the B   mark,   do not star t the engine.
-
 
I
f   the   level   is   above   the   MAX
 
mark   (risk  
o

f   damage   to   the   engine),   contact   a  
C

ITROËN   dealer   or   a   qualified   workshop.
-
 
I
f   the   level   is   below   the   MIN
 
mark,   you  
m

ust   top   up   the   engine   oil.
Oil grade
Before topping-up the oil or changing the oil, check   that   the   oil   is   the   correct   grade   for   your  
e

ngine   and   conforms   to   the   manufacturer's  
r

ecommendations.
Take
 
care
 
when
 
working
 
under
 
the
 
b

onnet,
 
as
 
certain
 
areas
 
of
 
the
 
engine
 
m

ay
 
be
 
extremely
 
hot
 
(risk
 
of
 
burns)
 
and
 
t

he
 
cooling
 
fan
 
could
 
start
 
at
 
any
 
time
 
(

even
 
with
 
the
 
ignition
 
off).
To
 
ensure
 
that
 
the
 
reading
 
is
 
correct,
 y
our
 
vehicle
 
must
 
be
 
parked
 
on
 
a
 
level
 
s

ur face
 
with
 
the
 
engine
 
having
 
been
 
off
 
f

or
 
more
 
than
 
30
 
minutes. Refer
 
to
 
the
 
"Petrol
 
engine"
 
or
 
"Diesel
 
engine"
 
s

ection
 
for
 
the
 
location
 
of
 
the
 
dipstick
 
in
 
the
 
e

ngine
 
compartment
 
of
 
your
 
vehicle.
F
 
T

ake
 
the
 
dipstick
 
by
 
its
 
coloured
 
grip
 
and
 
r

emove
 
it
 
completely.
F
 
W

ipe
 
the
 
end
 
of
 
the
 
dipstick
 
using
 
a
 
clean
 
n

on-fluffy
 
cloth.
F
 
R

efit
 
the
 
dipstick
 
and
 
push
 
fully
 
down,
 
then
 
p

ull
 
it
 
out
 
again
 
to
 
make
 
the
 
visual
 
check:
 
t

he
 
correct
 
level
 
is
 
between
 
the
 
marks
 
A
and
 
B
.
10
Checks

212
Topping up the engine oil level
Refer to the "Petrol engine" or "Diesel engine" section for the location of the oil filler cap in the
engine
  compartment   of   your   vehicle.
F
 
U
nscrew   the   oil   filler   cap   to   reveal   the   filler  
a

perture.
F
 
A
dd   oil   in   small   quantities,   avoiding   any  
s

pills   on   engine   components   (risk   of   fire).
F
 
W
ait   a   few   minutes   before   checking   the  
l

evel   again   using   the   dipstick.
F
 
A
dd   more   oil   if   necessary.
F
 
A
fter   checking   the   level,   carefully   refit   the  
o

il   filler   cap   and   the   dipstick   in   its   tube.
After
  topping   up   the   oil,   the   check   when  
s

witching   on   the   ignition   with   the   oil   level  
i

ndicator   in   the   instrument   panel   is   not   valid  
d

uring   the   30   minutes   after   topping   up.
Engine oil change
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
In
  order   to   maintain   the   reliability   of   the   engine  
a

nd   emission   control   system,   never   use  
a

dditives   in   the   engine   oil.
Brake fluid level
Changing the fluid
Refer to the manufacturer's service schedule for   details   of   the   interval   for   this   operation.
Fluid specification
The brake fluid must conform to the manufacturer's r ecommendations.
The
  brake   fluid   level   should   be   close  
t

o   the   "MA X"   mark.   If   it   is   not,   check  
t

he   brake   pad   wear.
Power steering
fluid level
The power steering fluid level should b
e   close   to   the   "MA X"   mark.   With   the e

ngine   cold,   unscrew   the   cap   to   check
 t

he   level.
Checks

213
Screenwash / headlamp
wash fluid level
Specification of the fluid
To ensure optimum cleaning and to avoid freezing,   the   fluid   should   never   be   topped   up   or r

eplaced   by   plain   water.
In
  wintry   conditions,   the   use   of   a   fluid  
w

ith   an   ethyl   alcohol   or   methanol   base   is  
re

commended.
To
 
check
 
the
 
level
 
or
 
top
 
up
 
the
 
f

luid
 
on
 
vehicle
 
fitted
 
with
 
headlamp
 
w

ashers,
 
immobilise
 
the
 
vehicle
 
and
 
s

witch
 
of
 
the
 
engine.
F
 
O

pen
 
the
 
bonnet
 
and
 
secure
 
it
 
with
 
the
 
s

t ay.
F
 
O

pen
 
the
 
screenwash
 
reservoir
 
filler
 
cap.
F
 
T

ake
 
and
 
pinch
 
the
 
level
 
gauge
 
to
 
block
 
its
 
b

reather.
F
 
R

emove
 
the
 
gauge
 
completely
 
from
 
t

he
 
reservoir
 
to
 
read
 
the
 
level
 
in
 
the
 
t

ransparent
 s

ection.
Coolant level
The coolant level should be close t o   the   "MA X"   mark   but   should   never  
e

xceed   it.
Fluid specification
The coolant must conform to the manufacturer's r ecommendations.
The cooling fan may star t after
switching off the engine: take care
with articles and clothing that might
be caught by the fan blades.
When
  the   engine   is   warm,   the   temperature   of  
t

he   coolant   is   regulated   by   the   fan.
In   addition,   as   the   cooling   system   is  
p

ressurised,   wait   at   least   one   hour   after  
s

witching   off   the   engine   before   carrying   out  
any   work.
To   avoid   any   risk   of   scalding,   unscrew   the   cap  
b

y   two   turns   to   allow   the   pressure   to   drop.  
W

hen   the   pressure   has   dropped,   remove   the  
c

ap   and   top   up   the   level. F  
T
op   up   if   necessary.
F  
R
efit   the   filler   cap   to   the   reservoir   and  
c

lose   the   bonnet.
10
Checks

214
Used products
The additive reservoir low level is 
i ndicated   by:
To p p i n g u p
The reservoir must be topped up without delay by   a   CITROËN   dealer   or   a   qualified   workshop.
-
 
f
ixed   illumination   of   the   particle  
f

ilter   warning   lamp,   accompanied  
b

y   an   audible   signal   and   a  
m

essage   that   the   particle   filter  
a

dditive   level   is   too   low.
Additive level (Diesel

with particle filter)
Avoid prolonged contact of used oil or f
luids   with   the   skin.
Most
  of   these   fluids   are   harmful   to  
h

ealth   or   indeed   very   corrosive.
Do
  not   discard   used   oil   or   fluids   into  
s

ewers   or   onto   the   ground.
Take
  used   oil   to   a   CITROËN   dealer   or  
a

  qualified   workshop   (France)   or   to   an  
a

uthorised   waste   disposal   site.
Checks