2013 VOLKSWAGEN PASSAT CC Owners Manual

Volkswagen Information System

Applicable only in the United States
Menu structure – overview

Back
– Mirror down (on/off)
– Mirror adjust
Individually
Both mirrors
Back
– Factory setting
– Back
▪ Lights & Vision
– Coming Home
– Leaving Home
– Footwell light
– Conv. turn sig. (convenience turn signal)
– Factory setting
– Back
▪ Time
– Hours
– Minutes
– 24 hr. mode
– Daylight save
– Back
▪ Snow tires (winter tires)
– On
– + 5 mph
– - 5 mph
– Back
▪ Compass (vehicles without navigation system)
▪ Units
– Temperature
– Consump./dist.
– Air pressure
– Back
▪ Alt. speed dis.
▪ Service
– Info
– Reset
– Back
▪ Factory setting
Applicable only in Canada
Menu structure – overview

Multi-Function Indicator (MFI)
▪ Travel time
▪ Consumption --.- l/100 km (current fuel consumption)
▪ Av. consumption --.- l/100 km (average fuel consumption)
▪ Range
▪ Route
▪ Average speed
▪ xx km/h (digital speed display)
▪ Oil temp. (3.6 liter engine only)
▪ Speed warning --- km/h
Audio ⇒ Booklet Radio or ⇒ Booklet Navigation system
Navigation ⇒ Booklet Navigation system
Phone ⇒ Booklet Mobile Phone Package
Assistants
▪ AFS
Vehicle status
Settings
▪ Language
▪ MFI data
– Travel time
– Curr. consum. (current fuel consumption)
– Av. consum. (average fuel consumption)
– Route
– Av. speed
– Digit. speed (digital speed display)
– Oil temp. (3.6 liter engine only)
– Speed warn. (speed warning)
– Back
▪ Convenience
– ATA confirm
– Central locking
Auto lock
Auto unlock
Unlock doors
Back
– Window op. (window operation)
Off
All
Driver
Back
– Mirror down (on/off)
– Mirror adjust
Individually
Both mirrors
Back
– Factory setting

– Back
▪ Lights & Vision
– Coming Home
– Leaving Home
– Footwell light
– Conv. turn sig. (convenience turn signal)
– Factory setting
– Back
▪ Time
– Hours
– Minutes
– 24 hr. mode
– Daylight save
– Back
▪ Snow tires (winter tires)
– On
– + 10 km/h
– - 10 km/h
– Back
▪ Compass (vehicles without navigation system)
▪ Units
– Temperature
– Consump./dist.
– Air pressure
– Back
▪ Tire pressure
▪ Alt. speed dis.
▪ Service
– Info
– Reset
– Back
▪ Factory setting
Using the instrument cluster menus

Fig. 12 Right side of the multi-function steering wheel: Controls for menus in the instrument cluster.

x Confirm the selection with /+
Switching all driver assistance systems on or off
x Press and hold the button (arrow) longer than one second to switch the driver assistance sys-
tems selected in the Assistants menu on or off at the same time.
x If no driver assistance system was activated in the Assistants menu, all systems are switched
on.
Main menu

To display the distance driven on trips 1 and 2, select the Route item in the MFI menu. Press the /+
button ⇒ fig. 12 to toggle between Route 1 and Route 2 (trip 1 and trip 2). Push and hold the /+ button
to manually reset a trip memory to zero.

1 Single trip
memory
The memory accumulates and stores information about distance driven
and fuel used from the time the ignition was switched on until the time it
was switched off.
If the ignition stays off for 2 hours or more, stored information is auto-
matically deleted. If the trip is continued within 2 hours after the ignition
was switched off, the new values are added.
2 Total trip memory
The memory displays and stores the accumulated driving and fuel
consumption data of any number of single trips up to a total driving
time of 99 hours and 59 minutes, and up to a total distance of
9,999 miles (9,999 km). If one of the maximum values is exceeded,
then the memory is automatically cleared and starts again from 0.

Possible MFI menu displays
The following displays can be accessed in the MFI menu if enabled under Settings > MFI data.
Displays that are not enabled will not appear.

Display Function
Travel time -- h/min Driving time in hours (h) and minutes (min) corresponding to trip mem-
ories 1 and 2 (toggle).
Consumption
--.- mpg
Current fuel consumption in miles per gallon (l/100 km) while driving.
When units are set to miles, dashes appear instead of a number when
the engine is running and the vehicle is standing still.
When units are set to kilometers, the display shows liters consumed
per hour when the engine is running and the vehicle is standing still.
Consumption
--.- l/100 km
Av. consumption
--.- mpg
Average fuel consumption in miles per gallon (l/100 km) on trips per trip
memories 1 and 2 (toggle) is displayed once the vehicle has been
driven about 330 feet (100 m). Until then, dashes appear instead of a
number. The value displayed is updated every 5 seconds. Av. consumption
--.- l/100 km
Range  -- mi Estimated distance in miles (km) that the vehicle can go with the fuel
left in the tank the way you are currently driving. Takes account of the
current fuel consumption, among other things. Range  -- km
Route -- mi Distance driven in miles (km) per trip memories 1 and 2 (toggle).
Route -- km
Average speed
-- mph
Average speed on trips per trip memories 1 and 2 (toggle). Displayed
once the vehicle has been driven about 300 feet (100 m). Until then,
dashes may appear instead of a number. The value displayed is up-
dated every 5 seconds. Average speed
-- km/h
-- mph Digital display of current vehicle speed.
-- km/h
Oil temp. Current engine oil temperature (digital display; 3.6 liter engine only).
Speed warning
--- mph
When the set speed (from 20–155 mph or 30–250 km/h) is exceeded,
an acoustic warning sounds and a visual message may also appear in