2013 AUDI A8 Owners Manual

Audi adaptive cruise control and braking guard 95
@ is located in front of that vehicle, the sys­
tem will not react to the stationary vehicle.
Audi adaptive cruise
control
Description
Applies to vehicles: with Audi adaptive cruise co ntrol
Fig. 96 Detectio n range
What can adaptive cruise control do?
The adaptive cruise control system uses video,
radar and ultrasound . Moving vehicles ahead
can be recognized up to about 650 feet (200 m) away.
On open roads w ith no traff ic, adaptive cruise
control works like a regular cruise control sys­
tem. The stored speed is maintained . When
approaching a moving vehicle detected up
ahead, the adaptive cruise control system au­
tomatically slows down to match that vehi­
cle's speed and then maintains the distance
that the driver previously stored. As soon as
the system does not detect a vehicle up
ahead, adaptive cruise control accelerates
back up to the stored speed.
In stop-and-go traffic, adaptive cruise control
can brake until the vehicle stops and acce ler­
ate again under certain conditions and if this
is possible within the system 's limits and ca­
pabilities
c> page 97 . Adaptive cruise control
will not make an emergency stop .
Which functions can be controlled?
When you switch adaptive cruise contro l on,
you can set the current speed as the "control speed"
c> page 95, Switching on and off.
When driving, you can stop cruise control
c> page 9 7 or change the speed c> page 96
at any time.
You can also set the distance to the object
ahead and set the adaptive cruise control driv­
ing program
c>page 97 .
Switching on and off
Applies to vehicles: with Audi adaptive cruise control
Fig. 97 Selector lever: sw itchin g on/off
Fig. 98 Instrumen t cl uster : ad apt ive crui se cont rol
You can set any speed between 20 mph and
95 mph (30 and 150 km/h).
Indicator lamps and messages in the instru ­
ment cluster d isplay inform you about the cur­
rent system status and settings.
Switching adaptive cruise control on
... Pull the lever toward you into position (D
c> fig . 97 . ACC standby appears in the in­
strument cluster display.
Setting the speed and activating
regulation
... To set the current speed, press the ISETI
button c> fig . 97 . The set speed is shown in
the tachometer @ and is also shown briefly
in the display @
c> fig. 98 . ..,..

96 Audi adaptive cruise control and braking guard
• You must also press the brake pedal when
the vehicle is stopped.
Switching adaptive cruise control off
• Push the lever away from you into position
@ until it clicks into p lace. The message
ACC off appears.
@ Indicator lights
II-Adaptive cruise control is switched on . No
vehicles are detected up ahead. The stored
speed is maintained.
I-A moving vehicle is detected up ahead .
The adaptive cruise control system regulates
the speed and d istance to the moving vehicle
ahead and acce lerates/brakes automatica lly.
S, -Adaptive cruise contro l is switched o n. A
mov ing vehicle up ahead was detected. Your
vehicle remains stopped .
I-When au tomatic braking is not able to
keep enough distance to a p reviously detected
mov ing vehicle up ahead, you must take con­
trol and brake ¢
page 98 , Prompt for driver
intervention.
© Display
If adap tive cruise control is not shown in the
d isplay, you can call it up with the multifunc ­
tion steering wheel buttons~
page 23.
Based on the symbols in the display , you can
determ ine if the system is maintaining a dis­
tance to the vehicle ahead and w hat that dis ­
tance is.
No vehicle -No vehicle ahead was detected.
White vehicle -A vehicle ahead was detected .
Red vehicle -Prompt for the driver to take ac­
tion ¢
page 98 .
Both arrows on the scale© indicate the dis­
tance to the vehicle ahead . No arrow appears
when the vehicle is on an open road and there is no object ahead. If an object is detected
ahead, the arrow moves on the scale .
The green zone on the scale shows the stored d istance. For information on changing the stored distance, refer to
¢
page 97. If the
distance se lected is too close or may soon be­
come too close, the arrows move into the red
z one on the sca le.
A WARNING
Improper use of the adaptive cruise con­
trol can cause collisions, other accidents
and serious personal injur ies .
- Pressing the
!SET ! button when driving at
speeds below
20 mph (30 km/h), w ill au­
tomatically accelerate the vehicle to
20
mph (30 km/h), which is the minimum
speed that can be set .
(D Tips
-If you switch the ignit ion or the adaptive
cruise control off, the set speed is erased
from the system memory.
- You cannot switch the Electron ic Stabili­
zation Control (ESC) to the SPORT mode
when adaptive cruise control is switched
on .
Changing the speed
Applies to vehicles: with Audi adaptive cruise control
0
f
• 0
Fig. 99 Selecto r lever : chang ing t he spee d
• To increase or reduce the speed in incre ­
ments,
tap the lever up or down.
-
-a)
N
q :r
~
"' To increase or reduce the speed qu ickly,
hold the lever up or down until the red L ED
@ reaches the desired speed ¢ page 95,
fig . 98.
Following any changes, the new stored speed
will be displayed briefly in the display @
¢ page 95 , fig. 98.

Audi adaptive cruise control and braking guard 97
Driving in stop-and-go traffic
Applies to vehicles: with Audi adaptive cruise control
The adaptive cruise control system also as­
sists you in stop-and -go traffic. If a previous
detected vehicle ahead s tops, yo ur vehicle will
brake to a stop, within the limits of the sys ­
tem .
.,. To resume driv ing with adap tive cruise con ­
tro l, tap the accelerator peda l or
.,. Pull the lever toward you into position @
¢page 97, fig. 100.
(D Tips
-If adaptive cru ise contro l is active and
your vehicle does not start driving as ex­ pected after pulling the lever once, you
can start out aga in by tapping the accel­
erator pedal.
- If an obstacle is detected when your ve­
hicle starts dr iv ing, the system w ill
prompt you to take over¢
page 98.
Your vehicle w ill drive more slowly when
starting. This may also happen in some
s ituations when no obstacle is apparent.
Interrupting cruise control
Applies to vehicles: with Audi adaptive cruise contro l
Fig. 100 Selector lever
Requirement : adaptive cruise control must be
switched on .
Overriding cruise control
.,. To accelerate manually, pull the lever to­
ward you into position @and hold it there .
The message
ACC override appears . Or
.,. press the accelerator pedal. .,.
To resume cruise contro l, release the lever
or take your foot off the accelerator pedal.
Canceling cruise control while driving
.,. Move the lever into position @. The mes­
sage
ACC standby appears . Or
.,. press the brake pedal.
.,. To resume the stored speed, move the lever
into position @ .
Canceling cruise control when stopped
.,. Push the lever away from you into pos ition
@ . Th e message
ACC standby appears.
.,. To resume cruise control, press the brake
pedal and pu ll the lever toward you into po­
sition @.
A WARNING
-
Never resume the stored speed if the
speed is too high for prevailing road, traf­
fic or weather conditions.
Setting the distance
App lies to vehicles: with Audi adapt ive cr uise contro l
Fig. 101 Selector lever: setting the distance
.,. Tap the switch to display the current set dis­
tance
¢ fig. 101 .
.,. To increase or reduce the distance by incre­
ments, tap the switch again to the left or
right. The distance between the two vehicles
w ill change in the instrument cluster dis ­
play .
When approaching a moving vehicle up ahead,
the adaptive cruise control system automati­
cally brakes to match that object's speed and
Ill-

98 Audi adapti ve cruise control and bra king gu ard
then maintains the stored distance. If the ve­
hicle ahead accelerates, adaptive cruise con­
trol will also acce lerate up to the stored
speed.
The higher the speed, the greater the distance
in yards (meters)¢ ,&. T he
Di sta nc e 3 setting
is recommended .
The distances p rov ided are specified values.
D epending on the driving situation and the
how the vehicle ahead is driving, the actual
distance may be more or less than these tar­
get distances.
The various symbols for the time increments
appear briefly in the information line@
¢
page 95, fig. 98 when you change the set­
tings.
~ -~ --- Dis tance 1 : This setting corre­
sponds to a distance of 92 feet/28 meters
when traveling at 62 mph (100 km/h), or a
time interva l of 1 second.
~ -- ~-- Dista nc e 2: This setting corre­
sponds to a distance of 1 18 feet/36 meters
when traveling at 62 mph (100 km/h), or a
time interva l of 1.3 seconds.
~ --- ~-Dis ta nce 3: This setting corre­
sponds to a distance of 164 feet/SO meters
when traveling at 62 mph (100 km/h), or a
time interva l of 1.8 seconds.
~---- ~ Dista nce 4 : This setting corre­
sponds to a distance of 210 feet/64 meters
when traveling at 62 mph (100 km/h), or a
time interva l of 2 .3 seconds.
A WARNING
Following other vehicles too closely in­
creases the risk of collisions and serious
personal inju ry.
- Setting short distances to the traffic
ahead reduces the t ime and distance
available to br ing your vehicle to a safe
stop and makes it even mo re necessa ry
to pay close attention to traffic.
- Always obey applicable traffic laws, use
good judgment, and select a safe follow- ing distance for the traffic, road and
weather conditions.
(D Tips
- Distan ce 3 is set automatically each time
you switch the ignition on .
- Your standard settings a re automatically
stored and assigned to the remote con­
tro l key being used.
Selecting the driving mode
Applies to vehicles: with Aud i adapt ive cru ise control
.. Select the desired driving mode in drive se­
lect¢
page 109 .
(D Tips
Your settings are automatically stored and
assigned to the remote control key being
used.
Prompt for driver intervention
Applies to vehicles: with Aud i adapt ive cru ise contro l
Fig. 1 02 In strument cluster: request for driver inte r­
vent ion
In certa in situations, the system will prompt
you to take action . Th is could happen, for ex­
amp le, if braking by the adaptive c ruise con­
tro l system is not enough to mai nta in enough
dis tance to the veh icle ahead .
The ind icator light
I and the symbol in the
display will warn you abo ut the s ituation
¢
fig. 102. You will also hea r an acous tic sig­
nal.
- Press the brake pedal to slow your vehicle
down.

Audi adaptive cruise control and braking guard 99
Audi braking guard
Description
Applies to vehicles: with Audi adaptive cruise control
Fig. 103 Instrumen t cl uste r: ap proac h warn ing
Braking guard uses radar sensors and a video
camera . It a lso functions within the lim its of
the system whe n adapt ive cruise control is
switched off .
What can braking guard do? When detected in time, the system can assess
situations when a vehicle ahead brakes sud­
denly or if y our own veh icle is traveling at a
high speed and approaching a veh icle up
ahead that is moving more slowly . Bra king
g ua rd does not react if i t cannot detect th e
si tuation.
The system advises you of va rious situations:
- The distance warning is given if you are too
close to the vehicle ahead for a long time. If
the vehicle ahead brakes sharply, you will not be able to avoid a col lisio n. The indicator
light
I i n the display comes on .
- The approach warning is g iven when a de­
tected vehicle up ahead in yo ur lane is mov ­
i ng much more slowly tha n you are o r if it
b rakes sha rply . When this wa rning is given,
i t may only be possib le to av oid a collision
by swerving or br aking sh arply . Th e ind ic a tor
li gh t
I and indicator in the disp lay will warn
yo u about the danger
c::> fig . 103 . You will al­
so hear an acoustic sig na l.
If yo u do not re act fast enoug h or do not re act
at all to the situat io n, braking g uard will inte r-
11
Thi s is not ava ilable in som e coun tri es.
vene by braking and the message braking
guard intervention will appea r.
- If a coll is ion is im minen t, the sy st em w ill
first provi de an acute warning by brie fly and
shar ply a pplying the brakes.
- If you do not re act t o the acu te war ning,
bra king g uard can brake w ith increas ing
force w ith in the lim its of the system. T his
red uces the vehicle speed in the event of a
co llision.
- The system can initiate maximum brak ing
short ly before a co llision
ll. Full dece leration
at high speeds occurs only in vehicles with
adapt ive cr uise control and side assist (pre
sense plus).
- If the brak ing g uard senses that yo u are not
braki ng hard enough w hen a co llision is im­
m inent, it can inc rease t he b ra ki ng fo rce .
- The pre sense functions also engage whe n a
col lision is imm inent
c::> page 196 .
Which function s can be controlled?
You can switc h braking guard an d the dis ­
tance/approach warning on or off in the M MI
c::> page 100, Settings in the MMI.
&_ WARNING
Lack of attent ion can cause collisions, ot h­
e r accidents and serio us pe rsonal inj uries .
Th e braking gua rd is an assist system and
ca nnot pr ev en t a collisi on by its elf . T he
dr iver must always in tervene. The drive r is
al way s res pons ible f or br aki ng a t the cor­
rect t ime.
- Always pay clos e att ention to traffic ,
e v e n w hen the bra king g uard is swi tched
on. Be ready t o intervene and be ready to
take comp lete contro l whenever necessa­
ry. Always keep the sa fe and legal dis ­
tanc e between your ve hicle an d veh icles
up ahead.
- Braking guard works wi thin limits and
wi ll not respo nd outside t he system lim­
its, for e xamp le w hen approaching a
stopped vehicle o r stationary obstacle ..,.

100 Audi adaptive cruise control and braking guard
(end of a traffic jam or vehicle that has
broken down in traffic).
- Always remember that the radar sensor
for the braking guard works only within
defined detection and range limits that
may prevent the proper detection of oth­
er vehicles.
- The radar sensor's function and range
can be reduced by rain, snow and heavy
spray. Moving vehicles up ahead may not
be promptly detected or may not be de­
tected at all.
- Reflective surfaces including crash barri­
ers or tunnel entrances may impair the
function of the radar sensor.
(D Tips
- You can cancel the braking with increas­
ing force that is initiated by the system
by braking yourself, by accelerating no­
ticeably or by swerving.
- Braking guard error messages
r::> page 100.
-Keep in mind that braking guard can
brake unexpectedly . Always secure any
cargo or objects that you are transport­
ing to reduce the risk of damage or in­
jury.
Settings in the MMI
Applies to vehicles: with Audi adaptive cruise control
• Select: ICARI function button > Car systems
control button > Driver assist > Audi brak­
ing guard.
System -
Switch braking guard On and Off.
When you switch the ignition on, the message
Audi braking guard off appears if the system
is switched off.
Early warning -The distance and approach
warnings in the display can be switched
On/
Off.
Tips
- Your settings are automatically stored
and assigned to the remote control key being used at the time the settings are
made.
- If you switch the ESC to sport mode,
braking guard switches off automatically
~page 200.
- Switch braking guard off when you are
loading the vehicle onto a vehicle carrier,
train, ship or other type of transporta­
tion. This can prevent undesired warn­
ings from the braking guard system.
Messages
Applies to vehicles: with Aud i adapt ive cru ise contro l
ACC unavailable
ACC and braking guard: unavailable
The system cannot detect moving vehicles up
ahead correctly and is switched off. The sen­
sors have been displaced or are not working
properly. The Audi pre sense functions may al­
so be affected. Drive to your authorized Audi
dealer or authorized Audi service facility im­
mediately to have the malfunction corrected.
ACC: unavailable at this time. No sensor vi­
sion
ACC and braking guide: unavailable at this
time. No sensor vision
This message appears if the sensor view is ob­ structed, for example by leaves, snow, heavy
spray or dirt . Clean the sensors
r:> page 93,
fig. 93.
ACC: unavailable at this time. Incline too
steep
The road exceeds the maximum possible an­
gle for proper adaptive cruise control opera­
tion. Adaptive cruise control is switched off .
ACC: only selector lever positions D, S or M
available
Select the D, Sor M selector lever position.
ACC: unavailable at this time. Parking brake
set
The adaptive cruise control system switches
off automatically if the parking brake is set. .,.

Audi adaptive cruise control and braking guard 101
ACC: Currently unavailable. Stabilization
control (ESC ) input
This me ssage appea rs if the Ele ct ron ic Stab ili­
z ation Contro l (ES C) is work ing to help st abi­
li ze the vehicle. In this case, adaptive cruise
contro l sw itches off automatically .
ACC: Please take over
This message appea rs whe n adapt ive cr uise
con trol cannot set t he parking b ra ke . P ress
the brake pedal to preve nt the vehicle from
r olling .
•••
Three wh ite dots appear if a setting cannot be
se lected with t he se lecto r lever . Fo r example,
this happens if adapt ive cr uise c ontrol can not
resume dr iv ing in stop-and -go traff ic because
one of the conditions required for ACC to wor k
i s not p resent.
Door open
The adaptive c ruise control system cannot
sw itch on when a d oor is open .
Stationary object ahead
This message appea rs if you would li ke to
sw itch ad aptive cr uise con trol o n and t here is
a sta ti onar y ve hicle or obs tacle direc tly ah ea d
of yo ur vehicle.

102 Audi la ne ass is t
Audi lane assist
Lane assist
Description
Appl ies to vehicles: with lane assist
Lane assist helps you keep your vehicle in your
lane .
Lane assist detects lane marker lines within
the limits of the system using a camera in the
windshield. If you are approaching a detected
lane marker line and it appears likely that you
will leave the lane, the system will warn you
with a light vibration . Lane assist is operable
when the line marking the lane is detected on
at least one s ide of the vehicle .
The system will not warn you before cross ing
a lane marker line if you have activated the
turn signal. In t his case, it assumes tha t you
a re changing lanes intent ionally.
The system is designed for driv ing on free­
ways and expanded highways and thus works
on ly at speeds of 40 mph (65 km/h) o r more.
.&_ WARNING
- Lane ass ist will not keep your vehi cle in
yo ur lane. The system only warns the
dr iver w hen the vehicle is leaving the
lane. The driver is always responsib le for
keeping the vehicle in the lane.
- The camera is not able to detect all lane
boundary lines and in some cases might
also detect lane structures or objects as
boundary lines. This can lead to incorrect
warnings or warnings that fail to go off
at all.
- The camera's visibility can be impaired by
vehicles ahead of you, for instance, or by
rain, snow, heavy spray or light shin ing
in to the camera lens. This can cause lane
assist to fa il to detec t bou ndary lines.
- Activating and deactivating
Applies to
vehicles: with lane assist
Fig. 104 Turn s igna l lever: Lane assist button
Fig . 105 Windsh ield: Lane assist camera viewing win ­
dow
"' Press the q fig. 104 button to activate or
deactivate t he system. The • or. ind ica­
t or l ight in the instrument cluster will il l u­
m inate or go o ut.
Instrum ent cluster indicator light
• Re ady:
The green indicator light shows
that th e system is ready to use . Th e system
can now warn you if yo u are about to cross a
known lane mar ker line.
• Not ready: The yellow indicator light
shows that the system is t urned on bu t unable
to send a warning . This can be due to the fol­
lowing :
- There is no lane boundary line .
- The relevant lane marker lines are not de-
tected (for example, markings in a construc ­
tion zone or because they are obst ructed by
snow, d irt, water or backlighting) .
- The vehicle's speed is below the speed need·
ed to activate it, wh ich is about 40 mph (65
km/h).
- The lane is narrower than about 8
ft. (2.5
m) .