2012 MITSUBISHI iMiEV Owners Manual

3-76 Features and controls
3Combination headlights and dimmer switch
N00522500710
HeadlightsNOTE
Do not leave the headlights and other lights on for a long
period of time while the ready indicator is not illuminated.
A run down 12V starter battery could result.

When it rains, or when the vehicle has been washed, the
inside of the lens sometimes becomes foggy. This is the
same as when window glass mists up on a humid day, and
does not indicate a problem. When the light is switched
on, the heat will dry out the fog. However, if water col-
lects inside the light, have it checked by a certified
i-MiEV dealer.
Type 1Rotate the switch to operate the lights.
The combinations of switch operations and illuminated lights
differ in accordance with the following conditions.
Except for vehicles equipped with daytime running lights
OFF All lights off
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 76 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-77
3
Vehicles equipped with daytime running lights
[When the ready indicator is illuminated, and the parking brake
is released]
The daytime running lights will be illuminated:NOTE
Once the daytime running light come on, they do not go
out until the electric motor switch is turned to the
“LOCK” or “ACC” position.
[When the ready indicator is not illuminated, or when the ready
indicator is illuminated but the parking brake is not released]
The electric motor unit starts when the lights are off.
Type 2Rotate the switch to operate the lights.
The combinations of switch operations and illuminated lights
differ in accordance with the following conditions.
Except for vehicles equipped with daytime running lights

OFF The daytime running lights illuminated
The daytime running lights illuminated
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
AUTOHeadlights and other lights turn on and off automati-
cally in accordance with outside light level.
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 77 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-78 Features and controls
3
Vehicles equipped with daytime running lights
[When the ready indicator is illuminated, and the parking brake
is released]
The daytime running lights will be illuminated:NOTE
Once the daytime running light come on, they do not go
out until the electric motor switch is turned to the
“LOCK” or “ACC” position.[When the ready indicator is not illuminated, or when the ready
indicator is illuminated but the parking brake is not released]
The electric motor unit starts when the lights are off.OFF The daytime running lights illuminated
AUTOThe daytime running lights illuminated
Headlights and other lights turn on and off automati-
cally in accordance with outside light level.
The daytime running lights illuminated
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
AUTOHeadlights and other lights turn on and off automati-
cally in accordance with outside light level.
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 78 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-79
3
NOTE
The sensitivity of the automatic on/off control can be
adjusted.
For further information, please contact a certified i-MiEV
dealer.

Do not place anything on the sensor (A), and do not clean
with a glass cleaner. Clean only with clear water.

If the lights do not turn on or off with the switch in the
“AUTO” position, manually operate the switch. Have the
system checked by a certified i-MiEV dealer.
Light auto-cutout function (headlights and other
lights)
N00532600554

If the key is turned to “LOCK” or “ACC” position or
removed from the electric motor switch and the driver’s
door is opened with the combination headlights and dim-
mer switch in the “ ” or “ ” position, the lights auto-
matically turn off.
• If the driver’s door is opened after the key is removed
from the electric motor switch, a buzzer will sound to
remind you to turn off the lights.
• If the driver’s door is opened with the key in the electric
motor switch, a buzzer will sound intermittently to
remind you to remove the key.

If the key is turned to “LOCK” or “ACC” position with
the driver’s door closed and the combination headlights
and dimmer switch in the “ ” or “ ” position, the
lights will stay on for about 3 minutes and then turn off
automatically. NOTE
The light auto-cutout function can be deactivated.
See a certified i-MiEV dealer for details.
BK0140800US.book 79 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-80 Features and controls
3
When you want to keep the lights on: If the combination headlights and dimmer switch is turned to
the “ ” or “ ” position again after the electric motor
switch is turned to “LOCK” or “ACC”position, the auto-cutout
function described above will not work. The lights (the parking
lights, tail lights and license plate lights) will stay on and will
not turn off automatically. NOTE
If the driver’s door is opened and the key is removed, the
headlight reminder buzzer will sound. If the key is still in
the electric motor switch the key reminder buzzer will
sound intermittently.
The buzzer stops when the driver’s door is closed.
Headlight reminder buzzer
N00549800213
If the driver’s door is opened with the key removed from the
electric motor switch while the lights are on, the buzzer will
sound to remind you to turn off the lights.
The lights and buzzer will turn off automatically.
Or you can turn the combination headlights and dimmer switch
to the “OFF” position to stop the buzzer.
BK0140800US.book 80 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-81
3
Dimmer (high/low beam change)
N00549900155
To change the headlights from high beam to low beam and vice
versa, pull the turn signal lever to fully toward you (1). Switch
the headlights to low beam as a courtesy whenever there are
oncoming vehicles, or when there is traffic moving ahead of
you. An illuminated blue light in the instrument cluster indi-
cates when the headlights are on high beam.
Headlight flasher
N00550000198
You can flash the high beams by pulling the lever gently
toward you (2). The lights will go back to normal when you let
go. While the high beam is on, you will see a blue light on the
instrument panel.NOTE
You can flash the high beams by pulling the lever toward
you, even if the combination headlights and dimmer
switch is off.

If you turn the lights off with the headlights set to high-
beam illumination, the headlights are automatically
returned to their low-beam setting when the combination
headlights and dimmer switch is next turned to the “ ”
position.
BK0140800US.book 81 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-82 Features and controls
3Turn signal lever
N00522600506
When changing lanes, or to making a gradual turn, hold the
lever in the “lane change” position (1). It will return to the neu-
tral position when you let go. Use the full position (2) when
making a normal turn. The lever will return to the neutral posi-
tion when the turn is complete. There may be times when the
lever does not return to the neutral position. This usually hap-
pens when the steering wheel is turned only slightly. You can
easily return the lever by hand.
Also, when you move the lever to (1) slightly then release it,
the turn signal lights and indicator in the instrument cluster will
flash three times.
NOTE
A light in the instrument panel flashes to show when the
front and rear turn signal lights are working properly.
If this light flashes faster than usual, check for a burned
out light bulb or malfunctioning connection.
If the panel light does not come on when the lever is
moved, check for a blown fuse or a burned out bulb in the
panel.
Have the vehicle inspected by a certified i-MiEV dealer.

It is possible to modify functions as follows:
• Deactivate the turn signal light 3-flash function for lane
changes.
• Adjust the time required to operate the lever for the 3-
flash function.
See a certified i-MiEV dealer for details.
BK0140800US.book 82 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-83
3 Hazard warning flasher switch
N00522700305
If you press the flasher switch, the front and rear turn signals
will flash intermittently, and so will the hazard warning lights.
This is an emergency warning system and should not be used
when the vehicle is in motion, except for emergencies.
If you need to leave your vehicle, the flashers will keep work-
ing after the key is removed from the electric motor switch.NOTE
If you keep the flashers on for a long period of time while
the ready indicator is not illuminated, the 12V starter bat-
tery could go flat and the electric motor unit could be
impossible to start.
Front fog light switch
(if so equipped)
N00522800410
The front fog lights illuminate only when the headlights are on
low beam.
Turning the knob in the direction of the “ON” position turns on
the front fog lights as well as the indicator in the instrument
cluster. To turn them off, turn the knob in the direction of the
“OFF” position.
The knob will return to the neutral position when it is released.NOTE
If the headlights are switched to high beam, the front fog
lights will go out; they will illuminate again when the
headlights are switched back to low beam.
BK0140800US.book 83 ページ ２０１１年９月２９日　木曜日　午後３時２８分