2011 HONDA ODYSSEY buttons

µ
The display shows up to about 14
characters of selected text data (the
foldername,filename,etc.).If the
text data has more than 14
characters, you will see the first 14
characters and the indicator in
the display. Press and hold the
TITLE button until the next 14
characters are shown. You will also see some text data
under these conditions:
When a new f older, f ile, or track is
selected.
When you insert a disc, and the
system begins to play.
If any letter is not available, it is
replaced with ‘‘ . ’’ (dot) in the display.
When the disc has no text data, you
will see ‘‘NO INFO’’ on the display. When you change the audio mode
to play a disc with text data or in
MP3, WMA or AAC.
When playing a CD-DA with text
data, the album and track name are
showninthedisplay.Withadiscin
MP3, WMA or AAC the display
shows the f older and f ile name. You can use the SKIP buttons while
a disc is playing to select passages
and change tracks (files in MP3,
WMA or AAC mode).
Each time you press and
release the SKIP button, the
player skips f orward to the
beginning of the next track (f ile in
MP3, WMA or AAC mode). Press
and release the to skip
backward to the beginning of the
current track. Press it again to skip
to the beginning of the previous
track.
To move rapidly within a track, press
andholdthe or SKIP
button.
T o Change or Select T racks/Files
Playing a Disc (L X model)
SK IP
246
10/07/17 10:07:24 31TK8600_251
2011 Odyssey

µ
µ µ
In MP3 or WMA mode
In MP3 or WMA modeThe system plays the f irst f ile in the
f irst f older f or about 10 seconds. If
you do nothing, the system will then
play the f irst f iles in the next f olders
f or 10 seconds. Af ter playing the f irst
file in the last folder, the system
plays normally.
Pressing either of the SKIP buttons
also turns off the scan feature. This
feature, when activated, samples the
f irst f ile in each f older on the disc.
To activate folder scan, press the
SCAN button twice. You will see
F-SCAN in the display.
Pressing either of the SKIP buttons,
selecting a dif f erent f older with the
FOLDER bar, or pressing the SCAN
button, also turns off the folder scan.
Each time you press and release the
SCAN button, the mode changes
from file scan to folder scan, then to
normal play.
This
feature, when activated, plays all
f iles in the selected f older in random
order. To activate f older random,
presstheRDMsideof theRPT/
RDM bar. You will see F-RDM in the
display. The system will then select
and play f iles randomly. This
continues until you deactivate f older
random by pressing and holding the
RDM side of the bar again, or by
selecting a dif f erent f older with the
FOLDER bar.
Each time you press and release the
RDMsideof thebar,themode
changes f rom f older random play to
random play (within a disc random
play), then to normal play. The scan f unction samples all tracks
(f iles in MP3 or WMA) on the disc in
the order they are recorded on the
disc. To activate scan, press and
release the SCAN button. You will
see SCAN in the display. You will get
a10secondsamplingof eachtrack/
f ile on the disc. Press and hold the
SCAN button until you hear a beep
to get out of scan mode and play the
last track/f ile sampled.
F-SCAN (FOLDER SCAN)
FOLDER-RANDOM SCAN (TRACK/FILE SCAN)
Playing a Disc (L X model)248
10/07/17 10:07:39 31TK8600_253
2011 Odyssey

Most audio system f unctions can be
controlled by standard buttons, bars,
and knobs. In addition, you can
access some f unctions by using the
selector knob on the audio system.To select any setting such as the
clock or sound adjusting, press the
SETUP button. To use any audio
system f unction, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position. You can select the
item by turning the selector knob.
To go back to the previous display,
press the RETURN button.
Pressing the SETUP button again
will also cancel the setup display
mode.
The knob turns lef t and right. Use it
to scroll through lists, or to make
selections or adjustments to a list or
menu item on the display. When you
make a selection, push the center of
the selector to go to that selection.
When the audio system is in XM
Radio mode or playing discs, pushing
the selector knob switches the
display between the normal display
andtheextendeddisplay.
Selector K nob
SET UP Display
Audio System (EX, EX-L models without navigation system)
Features
251
SELECTOR KNOB
RETURN BUTTON SETUP BUTTON
10/07/17 10:08:00 31TK8600_256
2011 Odyssey

Playing the FM/AM Radio (EX, EX-L models without navigation system)Wit hout rear ent ert ainment syst emWit h rear ent ert ainment syst em252SCAN
BUTTON
SKIP BAR
RETURN
BUTTON AM/FM BUTTON
SELECTOR KNOB
U.S. EX models
PRESET BUTTONS
TITLE
BUTTON Canadian EX and EX-L models
U.S. EX-L models
CATEGORY
BAR
SETUP
BUTTON POWER/
VOLUME
KNOB
TITLE
BUTTON
SKIP BAR
SCAN
BUTTON
RETURN
BUTTON
SELECTOR KNOB
SETUP
BUTTON
PRESET BUTTONS
AM/FM BUTTON
CATEGORY
BAR
(FOLDER
BAR) POWER/
VOLUME
KNOB
10/07/17 10:08:07 31TK8600_257
2011 Odyssey

µ
µ
You can use any of f ive methods to
f ind radio stations on the selected
band: tune, seek, scan, the preset
buttons, and auto select.
On the AM band, AM noise
reduction turns on automatically. The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button, or AM/FM button. On
the FM band, ST will be displayed if
the station is broadcasting in stereo.
Stereo reproduction in AM is not
available. On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see
. The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
and hold the or side of the
SKIP bar until you hear a beep, then
release it.
Use the selector knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency.
The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob. Adjust the
volume by turning the same knob.
CONT INUED
To Select a Station
To Play the Radio SK IP
TUNE
Playing the FM/AM Radio (EX, EX-L models without navigation system)
Features
253
10/07/17 10:08:15 31TK8600_258
page 255
2011 Odyssey

µ
µ µ
Each preset button can
store one f requency on AM and two
f requencies on FM.
Select the desired band, AM or
FM. You can store one f requency
on FM1, and one f requency on
FM2witheachpresetbutton.
Usethetune,skip,scan,orRDS
function to tune the radio to a
desired station.
Pick a preset button, and hold it
until you hear a beep.
Repeat steps 1 through 3 to store a
total of six stations on AM and
twelve stations on FM.
The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again. If you are
traveling and can no longer receive
your preset stations, you can use the
auto select feature to find stations in
the local area.
Push the SETUP button to display
the setup MENU. Turn the selector
knob to select Auto Select, then
press the selector knob. The display
changes to the auto select mode.
Select ‘‘PUSH TO START’’ or ‘‘ON,’’
then press the selector knob. You
will see Auto Select on the display,
and the system goes into the auto
select mode f or several seconds.
If you do not like the stations auto
select has stored, you can store
other f requencies on the preset
buttons as previously described.
1.
2.
3.
4. Preset
SCAN AUTO SELECT
Playing the FM/AM Radio (EX, EX-L models without navigation system)254
10/07/17 10:08:23 31TK8600_259
2011 Odyssey

Playing the XM
Radio (EX-L model without navigation system)
Wit hout rear ent ert ainment syst emWit h rear ent ert ainment syst em260
RETURN
BUTTONSCAN
BUTTON
SKIP BAR TITLE
BUTTON
SCAN
BUTTON
SKIP BAR
RETURN
BUTTON TITLE
BUTTON PRESET BUTTONS
XM BUTTON
POWER/
VOLUME
KNOB
SETUP
BUTTON CATEGORY
BAR PRESET BUTTONS
XM BUTTON
SELECTOR KNOB SELECTOR KNOBCATEGORY
BAR
POWER/
VOLUME
KNOB
SETUP
BUTTON
10/07/17 10:09:15 31TK8600_265
2011 Odyssey

µµ
µ
µ
µ µ
µ
µ
Youcanstoreupto12
preset channels using the six preset
buttons. Each button stores one
channel f rom the XM1 band and one
channel f rom the XM2 band.
To store a channel: Press the button. Either
XM1 or XM2 will show in the
display. Repeat steps 2 and 3 to store the
f irst six channels.
Once a channel is stored, simply
press and release the proper preset
button to tune to it. Press the button again.
The other XM band will show.
Store the next six channels using
steps 2 and 3.
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon.
The selected
channel has no artist or title
inf ormation at this time.
XM is loading the
audio or program inf ormation.
The channel
currently selected is no longer
broadcasting. The
encryption code is being updated.
Wait until the encryption code is
f ully updated. Channels 0 and 1
should still work normally.
There is
a problem with the XM antenna.
Please consult your dealer.
Use the selector knob, SKIP bar,
CATEGORYbarorSCANbutton
to tune to a desired channel.
The selected
channel number does not exist, is
not part of your subscription, or this
channel has no artist or title
inf ormation at this time.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
Pick the preset button you want
f or that channel. Press and hold
the button until you hear a beep.
3. 4.
5.
2. 1.
CONT INUED
Preset
XM Radio Display Messages ‘‘NO SIGNA L ’’
‘‘NO INFO’’
‘‘L OA DING’’
‘‘OFF A IR’’ ‘‘UNA UT HORIZED’’
‘‘CHECK A NT ENNA ’’ ‘‘UNA VA IL A BL E’’
Playing the XM
Radio (EX-L model without navigation system)
Features
263
10/07/17 10:09:41 31TK8600_268
2011 Odyssey