2011 Citroen DS4 Owner's Manual

95Comfort





Mirrors

Each fitted with an adjustable mirror glass
permitting the lateral rear ward vision necessary
for over taking or parking. They can also be
folded for parking in confined spaces.

Demisting - Defrosting
Adjustment



)
Move control A
to the right or to the left to
select the corresponding mirror.

)
Move control B
in all four directions to
adjust.

)
Return control A
to the central position.


Door mirrors

The objects obser ved are, in reality,
closer than they appear.
Take this into account in order to
correctly judge the distance of vehicles
approaching from behind.




Folding



)
From outside: lock the vehicle using
the remote control or the key.

)
From inside: with the ignition on, pull the
control A
in the central position rear wards.


Unfolding



)
From outside: unlock the vehicle using
the remote control or the key.

)
From inside: with the ignition on, pull the
control A
in the central position rear wards. If the mirrors are folded using control A
,
they will not unfold when the vehicle is
unlocked. Pull again on control A
.
The folding and unfolding of the door
mirrors using the remote control can be
deactivated by a CITROËN dealer or a
qualified workshop.
Never fold or unfold the electric folding
mirrors manually.
If your vehicle is fitted with heated
mirrors, the demisting-defrosting
operates with the engine running, by
switching on the heated rear screen
(refer to the "Rear screen demist-defrost"
page).

Automatic tilting in reverse gear

System which provides a view of the ground
during parking manoeuvres in reverse gear.


Programming



)
With the engine running, engage reverse
gear.

)
Select and adjust the left-hand and right-
hand mirrors in succession.
The adjustment is stored immediately.


Switching on



)
With the engine running, engage reverse
gear.

)
Move control A
to the right or to the left to
select the corresponding mirror.
The glass of the mirror selected tilts
downwards, in accordance with its
programming.


Switching off



)
Exit reverse gear and wait ten seconds.
or


)
Return control A
to the central position.
The mirror glass returns to its initial position.
The mirror glass also returns to its initial
position:


- if the speed exceeds 6 mph (10 km/h),

- if the engine is switched off.

97Comfort





Rear view mirror

Adjustable mirror providing a central rear ward view.
Equipped with an anti-dazzle system, which darkens the mirror glass: this reduces the nuisance to
the driver caused by the headlamps from following vehicles, low sun...


Manual day/night model

Adjustment



)
Adjust the mirror so that the glass is
directed correctly in the "day" position.



Day/night position



)
Pull the lever to change to the "night"
anti-dazzle position.

)
Push the lever to change to the normal
"day" position.

By means of a sensor, which measures the
light from the rear of the vehicle, this system
automatically and progressively changes
between the day and night uses.







Automatic day/night model


In order to ensure optimum visibility
during your manoeuvres, the mirror
lightens automatically when reverse
gear is engaged.

As a safety measure, the mirrors should be adjusted to reduce the "blind spot".

004
Access

Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and star t the vehicle, as
well as providing protection against theft.









Unlocking the vehicle


Unfolding the key



)
Press this button to unfold the key.



Complete unlocking using the
remote control

Selective unlocking using the
remote control


)
Press the open padlock to unlock
the vehicle completely.



)
Press the open padlock once to
unlock the driver's door only.

)
Press the open padlock again to unlock the
other doors and the boot.



Opening the windows using the
remote control


)
Maintain the press on the open
padlock until the desired position
is obtained. The windows stop as
soon as you release the button.



Programming the unlocking

The complete or selective door
unlocking parameter is set via the
vehicle configuration menu.

101Access

Unlocking using the key



)
Turn the key for wards in the driver's door
lock to unlock the vehicle completely.



Selective unlocking of the boot



)
Press the central button on the
remote control to unlock the
boot. The doors remain locked.
If selective unlocking of the boot is deactivated,
pressing this button also unlocks the doors.

Programming the unlocking

The complete or selective boot
unlocking parameter is set via the
vehicle configuration menu.
Selective unlocking of the boot is
activated by default.

Each unlocking is confirmed by rapid flashing
of the direction indicators for approximately
two seconds.
According to the version of your vehicle,
the door mirrors unfold at the same time.
Depending on the level of ambient light, it also
brings on the timed operation of the welcome
lighting, both interior and exterior, for around
30 seconds (See "Visibility - Welcome
lighting"). Don't forget to lock the boot again by
pressing the closed padlock button.

Locking the vehicle


Normal locking using the remote
control

Normal locking using the key



)
Turn the key towards the rear in the driver's
door lock to lock the vehicle.


)
Press the closed padlock to lock
the vehicle.

If one of the doors or the boot is still
open, the central locking does not
take place; the vehicle locks itself then
unlocks straight away, identifiable by
the sound of the locks rebounding.
When the vehicle is locked, if it is
unlocked inadvertently, it will lock itself
again automatically after thir ty seconds
unless a door or the boot is opened.
The folding and unfolding of the door
mirrors using the remote control can be
deactivated by a CITROËN dealer or a
qualified workshop.

Locking is confirmed by fixed lighting of the
direction indicators for approximately
two seconds.
According to version, the door mirrors fold at
the same time.
depending on the level of ambient light, it also
brings on of the timed operation of the welcome
and guide-me-home lighting, if this is activated
(see "Visibility - Automatic welcome lighting/
Guide-me-home lighting").



Closing the windows using the
remote control


)
Press and hold down the closed
padlock until the desired position
is obtained. The windows stop
when you release the button.
When closing the windows using the
remote control you must ensure that
nothing prevents them from closing
correctly.
If you want to leave the windows
partly open, you must deactivate the
volumetric alarm monitoring.