2011 Citroen DS4 Owner's Manual

55Monitoring





















Manual test in the central colour screen associated with the satellite navigation system

This function allows you to check the status of the vehicle systems (reminder of the "activated"/"deactivated" status of the configurable functions) and
to display the alerts log.


)
With the engine running, to star t a manual
test, briefly press the ".../000"
button on
the instrument panel. The following information appears successively
in the instrument panel central colour screen:


- engine oil level indicator
(see corresponding section),

- ser vice indicator (see corresponding
section),

- under-inflation detection (if your vehicle
is fitted with this system; see the "Safety"
section),

- current warnings and aler t messages, if
any (see corresponding section for the
warning lamp or system concerned),

- status of configurable functions
(see "Multifunction screens"). This information also appears every
time the ignition is switched on
(automatic test).

The total and trip distances are displayed for
thir ty seconds when the ignition is switched
off, when the driver's door is opened and when
the vehicle is locked or unlocked.












Distance recorders


Total distance recorder
Trip distance recorder

Measures a distance travelled since it was
reset to zero by the driver.


)
With the ignition on, press and hold this
button until zeros appear.
Measures the total distance travelled by
the vehicle since its first registration.

57Monitoring









Lighting dimmer

Permits manual adjustment of the brightness of
the instruments and controls in relation to the
exterior brightness. Only operates when the
vehicle lighting is on in night mode.

Activation



)
Press button A
to change the brightness of
the instruments and controls.

)
When the lighting reaches the minimum
setting, release the button, then press
again to increase it.
or


)
When the lighting reaches the maximum
setting, release the button, then press
again to reduce it.

)
When the lighting reaches the level of
brightness required, release the button.
This indicator and the lighting
value appear in the middle of the
instrument panel during adjustment
to show the lighting level compared to
the 16 levels available. You can also modify the level of lighting by
turning the thumb wheel B
, located on the left
of the steering wheel:


)
upwards; to reduce the level,

)
downwards; to increase the level.



Deactivation

When the vehicle lighting is off, or in day mode
(daytime running lamps on), pressing the button
or turning the thumb wheel does not have any
effect.

System allowing cer tain screens to be switched
off for night driving.
The instrument panel remains on with the
vehicle speed, electronic or automatic gearbox
gear selected, cruise control or speed limiter
information, if in use, and the low fuel alerts as
appropriate.
If there is an aler t or a change in a function
or to a setting, the black panel mode is
interrupted.






Black panel (black screen)


Activation



)
With the vehicle lighting on, press this
button again to activate the black panel.

)
Press once more to illuminate on the
various screens again.

In the instrument panel, you can change the
colour of its dials (button A
) independently from
that of the screens (button B
).
There are five colour variants, from white to
blue.


)
press the appropriate button as many times
as needed to obtain the desired colour.








Customising the instrument
panel colours

59Monitoring






Customising the
polyphonic sounds
This menu allows you to choose a family of
polyphonic sounds from the four available.
These sounds are grouped together in a family
and are adapted to suit the situation and
context (alert, confirmation, rejection, direction
indicators, lighting left on, key in ignition...).

For the customisable colour
instrument panel associated with
the satellite navigation system


)
Press the thumb wheel for access to the
main menu.

)
Select the "Choice of sounds" line and
confirm.

)
Select the desired family of sounds and
confirm.

)
Save the modifications by confirming "OK".

For safety reasons, the driver must
only carry out these operation when
stationary. For safety reasons, these operations
are only possible when stationary.


For the customisable colour
instrument panel with audio system


)
Press the "MENU"
button for access to the
main menu.

)
Select the "Personalisation-configuration"
menu and confirm.

)
Select the "Choice of sounds" line and
confirm.

)
Select the desired family of sounds and
confirm.

)
Save the modifications by confirming "OK".

002
Multifunction screens

Monochrome screen C

This displays the following information:


- time,

- date,

- ambient temperature (this flashes if there is
a risk of ice),

- openings check (if a doors or the boot is
open),

- parking sensor information,

- current audio source,

- telephone or Bluetooth system information,

- trip computer (refer to the end of the
section).
Warning messages (e.g.: "Emission control
system faulty") or information messages (e.g.:
"Automatic switching on of the headlamps
activated") may appear temporarily. These can
be cleared by pressing the "ESC"
button.


Displays in the screen

From the control panel of your audio system,
you can press:


)
button A
to chooses between the display
of audio information in full screen or the
shared display of audio and trip computer
information,

)
the "MENU"
button for access to the main
menu
,

)
the " 
" or " 
" buttons to scroll through the
items on the screen,

)
the " 
" or " 
" buttons to change a setting
value,

)
the "OK"
button to confirm,
or


)
the "ESC"
button to abandon the operation
in progress.



Controls



)
Press the "MENU"
button for access to the
main menu
:


- "Multimedia",

- "Telephone",

- "Trip computer",

- "Bluetooth connection",

- "Personalisation-configuration",

)
Press the " 
" or " 
" button to select the
menu required, then confirm by pressing
the "OK"
button.



Main menu