2010 MITSUBISHI OUTLANDER Owners Manual

Page 577 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 6-8 For emergencies
6
Removing and storing the jack and toolsTo  r e m o v e1. Turn the knob (A) counterclockwise and remove the lid
(B).2. Undo the securing band (C) around the tools and remove
the t

Page 578 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual For emergencies
6-9
6
3. Retract the jack to remove it from the attaching hardware
(D).
To  s t o r e1. Retract the jack, then return it to its original position.
2. Extend the jack and firmly set it

Page 579 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 6-10 For emergencies
6How to change a tire
N00836900747
Before changing a tire, first stop your vehicle in a safe, flat
location.
1. Park the vehicle on level and stable ground.
2. Be sure that the pa

Page 580 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual For emergencies
6-11
6
NOTE
The chocks shown in the illustration do not come with
your vehicle. It is recommended that you purchase chocks
or blocks and keep them in the vehicle for use if needed.


Page 581 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 6-12 For emergencies
6
To remove the spare tire
N00849700127
1. Open the tailgate and use the bar to remove the cover (A)
over the tire hanger mounting bolt.
Refer to “Flap-fold tailgate: To open”

Page 582 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual For emergencies
6-13
6
2. With the wheel nut wrench, loosen the tire hanger mount-
ing bolt by turning it counterclockwise.
3. Raise the lower gate until it clicks and locks.
Refer to “Flap-fold tai

Page 583 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual 6-14 For emergencies
6
To install
N00860500027
1. Place the tire on the center of the tire hanger, with the
wheel surface facing upwards.2. Lift up the tire hanger (A) and hook it on the hook (B).
CAU

Page 584 of 714

MITSUBISHI OUTLANDER 2010 2.G Owners Manual For emergencies
6-15
6
3. Open the lower gate.
Refer to “Flap-fold tailgate: To open” on page 3-60.
4. With the wheel nut wrench, firmly tighten the tire hanger
mounting bolt by turning it clockwi