2010 JAGUAR XFR torque

10.
11. Torque: 4 Nm

























NOTE: Make sure that the harness is routed to the
position noted on removal. www.JagDocs.com

12.
















13.
14. CAUTION: Make sure that the wiring harness is routed
above the drive bar as shown, to avoid damage to the
wiring harness during movement of the front seat.














NOTES:


An audible click is heard when the clips are fully
latched.


Make sure the electrical connector is securely
connected.









Torque: 1.3 Nm

19.
















20.
21. CAUTION: Fixings must be started by hand to avoid
damaging threads.
Torque:
M8 2.5 Nm T27 9 Nm www.JagDocs.com

22.























23.
CAUTION: Fixings must be started by hand to avoid
damaging threads.
Torque:
M8 2.5 Nm T27 9 Nm

Torque: 20 Nm

Torque: 20 Nm

5.
6. Torque: 6 Nm 7.
8. NOTES:


If the SRS component is to be replaced, the bar code
of the new unit must be recorded.


The RCM will record and store impact data. The
module must be replaced when three records are noted.
Torque: 10 Nm

Supplemental Restraint System - Side Air Curtain Module
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

All vehicles Published: 19-May-2011

1. Make the air bag supplemental restraint system (SRS) safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

2. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

3. Refer to: Interior Rear View Mirror (501-09 Rear View Mirrors, Removal and Installation).

4. Refer to: Overhead Console (501-12 Instrument Panel and Console, Removal and Installation).

5. Refer to: Sun Visor (501-05 Interior Trim and Ornamentation, Removal and Installation).

6. Refer to: A-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

7. Refer to: B-Pillar Upper Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

8. Refer to: C-Pillar Lower Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

9. Torque: 2 Nm