2010 JAGUAR XFR torque

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Luggage Compartment Lid Release Switch
Removal and Installation

Removal

All vehicles

NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2.
3. Torque: 3 Nm 4.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Rear Door Handle
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1. NOTE: Remove the screw sufficiently, only to release the
component.
Torque: 4 Nm












2. NOTE: Some variation in the illustrations may occur,
but the essential information is always correct. www.JagDocs.com

5. NOTE: Left-hand shown, right-hand similar.

Torque: 7 Nm































6. NOTE: Left-hand shown, right-hand similar.
7. NOTE: Right-hand shown, left-hand similar.
Torque: 3 Nm

8.















9.
10.
NOTE: Right-hand shown, left-hand similar.

Torque: 7 Nm














NOTE: Left-hand shown, right-hand similar.



































NOTE: Do not disassemble further if the component is
removed for access only. www.JagDocs.com

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Front Door Lock Cylinder
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1.





























2. NOTE: Remove the screw sufficiently, only to release
the component.
Torque: 4 Nm

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Luggage Compartment Lid Latch
Actuator
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Lock Cylinder (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).




Installation

2. Torque: 20 Nm
1. To install, reverse the removal procedure.

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Luggage Compartment Lid Lock Cylinder
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2.
3. Torque: 3.2 Nm

Handles, Locks, Latches and Entry Systems - Rear Door Latch
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011

1. Remove the rear door window regulator and motor.

Refer to: Rear Door Window Regulator and Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation).

2. Remove the rear door exterior handle.

Refer to: Exterior Rear Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).

3. Torque: 3 Nm 4.