2010 JAGUAR XFR torque

6. CAUTIONS:
Make sure the locating dowels are installed correctly.
Make sure that the clips are correctly located.

Torque: 6 Nm
















7. CAUTIONS:


Note the fitted position of the component prior to
removal.


Make sure that the clips are correctly located.














8. CAUTIONS:


Note the fitted position of the component prior to removal.
Make sure that the clips are correctly located. www.JagDocs.com

Published: 11-May-2011
Interior Trim and Ornamentation - Instrument Panel Speaker Grille
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

2. CAUTIONS:


Protect the surrounding trim to avoid damage.
Make sure that the clips are correctly located.









3.
4. CAUTION: Make sure that the component is correctly
located on the locating dowels.


NOTE: Do not disassemble further if the component is
removed for access only.
Torque: 2 Nm

13.



























Vehicles with roof opening panel

14. NOTES:


Note the different lengths of screws.


Make sure that the component is installed to the
position noted on removal.
Torque: 2 Nm

Vehicles without roof opening panel

15. NOTES:


Note the different lengths of screws.


Make sure that the component is installed to the
position noted on removal.
Torque: 2 Nm




















All vehicles

16.

Interior Trim and Ornamentation - Parcel Shelf
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011

1. Refer to: C-Pillar Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2. Torque: 12 Nm www.JagDocs.com

7. NOTE: The procedure must be carried out on both
sides of the seat.
Torque: 6 Nm




















8.

Interior Trim and Ornamentation - Sun Visor
Removal and Installation
Removal

NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011


1. CAUTION: Take extra care not to damage the edges of the
component.

































2. TORQUE: 2 Nm www.JagDocs.com

Published: 11-May-2011
Exterior Trim and Ornamentation - Luggage Compartment Lid Moulding
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.

1. Refer to: Luggage Compartment Lid Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

2.
3. Torque: 3 Nm 4. www.JagDocs.com