2010 JAGUAR XFR torque

2. CAUTIONS:


Install all the bolts finger tight before final tightening.


Care must be taken not to damage the outer door
panel.

Install the retaining bolt 1 to the witness mark on
the body.
Torque:
1 1.9 Nm 2 5 Nm






















3. NOTE: Components removed for clarity.
4. NOTE: Right-hand shown, left-hand similar.
Torque: 1.5 Nm









5. Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).

Instrument Panel and Console - Glove Compartment
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details. Published: 11-May-2011

1. Refer to: Passenger Side Register (412-01 Climate Control, Removal and Installation).

2.
3. CAUTION: Fixings must be started by hand to avoid
damaging threads.

Upper 3 bolts.

Torque: 2.5 Nm Lower 3 bolts.

Torque: 9 Nm

15.

























16. CAUTION: Be prepared to collect escaping coolant.

Special Tool(s): 303-1496






















CAUTION: Take care not to damage the O-ring seals
during installation.
Torque: 9 Nm

Torque: 30 Nm

Torque: 9 Nm www.JagDocs.com

Torque: 20 Nm

Lower 3 bolts.

Torque: 9 Nm www.JagDocs.com

Published: 11-May-2011
Handles, Locks, Latches and Entry Systems - Exterior Front Door Handle
Removal and Installation

Removal


NOTE: Removal steps in this procedure may contain installation details.


1. NOTE: Remove the screw sufficiently, only to release
the component.
Torque: 4 Nm












2. NOTE: Some variation in the illustrations may occur,
but the essential information is always correct. www.JagDocs.com