2010.5 Citroen C4 PICASSO DAG Owner's Manual

II
52
M U L T I F U N C T I O N S C R E E N S
Main Menu

Traffi c Information

Navigation/Guidance

Map

Audio Functions

Telematics

Confi guration,
to confi gure the screen
(date, time...) and defi ne ve-
hicle parameters

Video

Vehicle Diagnostics
- "Alert log",
- "Status of functions".
Press button
A to display the "Main
Menu":
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).
Monochrome screen A
Information displays
 Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.

 The next press then returns you
to the normal display.

 Press the button, located at the
end of the wiper stalk , to display
the various items of trip computer
data in succession.

II
52
M U L T I F U N C T I O N S C R E E N S
Main Menu

Traffi c Information

Navigation/Guidance

Map

Audio Functions

Telematics

Confi guration,
to confi gure the screen
(date, time...) and defi ne ve-
hicle parameters

Video

Vehicle Diagnostics
- "Alert log",
- "Status of functions".
Press button
A to display the "Main
Menu":
TRIP COMPUTER
System which provides current infor-
mation concerning the trip travelled
(range, fuel consumption...).
Monochrome screen A
Information displays
 Press the control for more than
two seconds to reset to zero the
distance travelled, the average
fuel consumption and the aver-
age speed.
Zero reset
The trip computer provides the fol-
lowing information:
- range,
- current fuel consumption,
- distance travelled,
- average fuel consumption,
- average speed.

 The next press then returns you
to the normal display.

 Press the button, located at the
end of the wiper stalk , to display
the various items of trip computer
data in succession.

II
53
M U L T I F U N C T I O N S C R E E N S
TRIP COMPUTER
System which provides current in-
formation concerning the route trav-
elled (range, fuel consumption, …)
in the multifunction screen.
Monochrome screen C
MyWay or NaviDrive colour
screen Display of information
Trip zero reset

 Press the button, located at the
end of the wiper stalk , to display
the various trip computer infor-
mation groups in succession:
- the current information group with:

II
54
M U L T I F U N C T I O N S C R E E N S
A few definitions… Range
(miles or km)
This value may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current fuel con-
sumption.
When the range falls below 20 miles
(30 km), dashes are displayed. After
fi lling with at least 5 litres of fuel,
the range is recalculated and is dis-
played when it exceeds 60 miles
(100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a CITROËN dealer.
This indicates the distance which
can still be travelled with the fuel re-
maining in the tank in relation to the
average fuel consumption over the
last few miles (kilometres) travelled.
Current fuel consumption
(mpg or l/100 km or km/l)
Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel consump-
tion since the last trip computer zero
reset.
Average speed
(mph or km/h)
This is the average speed calculat-
ed since the last trip computer zero
reset (ignition on). Distance travelled
(miles or km)
This indicates the distance travelled
since the last trip computer zero
reset.
Distance remaining to
destination
(miles or km)
This is the distance remaining to be
travelled to the fi nal destination. It
is either calculated instantly by the
navigation system, if guidance is ac-
tivated, or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
This function is only displayed from
20 mph (30 km/h).
This is the average fuel consump-
tion during the last few seconds.
If your vehicle is fi tted with Stop &
Start, a time counter calculates the
time spent in STOP mode during a
journey.
It resets to zero every time the igni-
tion is switched on with the key. Stop & Start time counter
(minutes/seconds or hours/
minutes)

III
55
C O M F O R T
RECOMMENDED SETTINGS FOR VENTILATION, HEATING AND AIR CONDITIONING Air intake
Check that the exterior grille for the
air intake at the bottom of the wind-
screen, is clean and free of dead
leaves, snow, etc.
Air distribution

1. Windscreen demisting/defrosting
vents.

2. Front side windows demisting/
defrosting vents.

3. Adjustable air vents.

4. Adjustable central air vents.

5. Front passenger footwell air out-
lets.

6. Adjustable 2nd row side air
vents, with air fl ow and tempera-
ture adjustment.

7.
Rear passenger footwell air outlets.

8. Adjustable 3rd row side air vents.
The side air vents 8 apply only to the
7-seater versions.

III
56
C O M F O R T
Air conditioning
To ensure that your system operates
correctly, it is recommended that you
have it checked regularly.
Water arising from condensation
in the air conditioning drains away
through a hole provided for this pur-
pose. A pool of water may thus form
under the vehicle when stationary.
To preserve the sealing of the air
conditioning compressor, operate
the air conditioning at least once a
month.
Regardless of the season, the air
conditioning is useful, since it re-
moves humidity and condensation.
To be effective, the air conditioning
should only be used with the win-
dows closed.
If after a lengthy stop in bright sun-
light the interior temperature is
excessive, air the passenger com-
partment by opening the windows
for a few moments, then close them
again.
The air conditioning operates by
using power from the engine. This
results in a slight increase in fuel
consumption.
Dust filter/Odour filter (active
carbon)
There is a fi lter for excluding odours
and dust.
This fi lter has to be changed in
accordance with the vehicle's ser-
vicing schedule (see "Maintenance
and Warranty Guide").
Air circulation
Air vents on the fl oor underneath the
front seats provide enhanced heat-
ing for the rear seat positions; take
care not to obstruct them.
Air vents
The air vents to the face have grilles
and thumbwheels to adjust the air
fl ow and direction (up-down, right-
left).
The automatic regulation of the air
conditioning in the passenger com-
partment uses a number of sensors
(sunshine sensor, ambient tempera-
ture sensor...) that relieve you of the
need to make frequent adjustments
to the displayed temperature.
Take care not to obstruct the sun-
shine sensor, located on the dash-
board behind the instrument panel.
Sensors

III
57
C O M F O R T
MANUAL AIR CONDITIONING
The air conditioning system oper-
ates with the engine running.
A. DRIVER'S CONTROL PANEL
1. Adjustment of the air fan speed
The air fan adjustment only operates
when the engine is running.
To adjust the air fl ow, press button 1 :
to increase the fl ow of air,
to decrease the fl ow of air. The level of air fl ow is shown by the
progressive lighting of the warning
lamps depicting the fan blades
1 .
By reducing the fl ow to minimum,
you deactivate the air conditioning
system (OFF).
To maintain an acceptable level of
comfort in the passenger compart-
ment, you should not leave this
control too long in the OFF position.
2. Adjustment of air distribution

 Press button 2 to make the dis-
play run through the different
types of air distribution.
The air distribution chosen
is shown by the lighting of
the corresponding warning
lamps on the display 2 .
3. Mode of adjustment of temperature for the
passenger

 Press button 3 to have indepen-
dent passenger control of cabin
air temperature. The warning lamp
goes off.
While the passenger is adjusting tem-
perature, the warning lamp comes on. 4. Air recirculation
This control is for isolating disagree-
able odours or fumes coming from
outside.

 Press button 4 to cut off the in-
take of outside air and to acti-
vate recirculation of the air in the
passenger compartment. The
warning lamp comes on.
Avoid the extended use of air re- circulation (risk of deterioration
of air quality and misting).


Press button 4 again to allow the
intake of exterior air. The warning
lamp goes off.
5. Air conditioning
The air fan control (adjusting the fl ow
of air) has to be activated in order for
air conditioning to be obtained.

 Press button 5 . The warning
lamp comes on.
To be effective, the air condi-
tioning should be operated only
with the windows closed.
If your vehicle is not equipped with
air conditioning, you will have the
same control panel but without the

A/C button.

III
58
C O M F O R T
6. Demisting/defrosting the rear screen
This function operates only if the
engine is running.

 Press button 6 to activate/de-
activate the electric demisting/
defrosting of the rear screen and
door mirrors. The warning lamp
comes on.
7. Rapid demisting/defrosting of front and rear windows
and door mirrors

 Press button 7 . The warning
lamp comes on.
This function simultaneously acti-
vates:
- front demisting/defrosting,
- optimum fl ow of air,
- recirculation prohibition,
- demisting/defrosting of door mir- rors and heated rear screen,
- air conditioning, if necessary.
To stop the function, press button 7
again. 8. Adjustment of the fan air
temperature
This control is for adjusting the tem-
perature of the air in the passenger
compartment. It can be used in cold
weather as well as in hot weather, pro-
vided the air conditioning is active.
The adjustment of the temperature is
continuous and progressive starting
from left to right.
Adjustment of temperature

 Press button 9 to take control of
the temperature. The warning
lamp comes on.

 Rotate button 10 to adjust your
temperature.
The adjustment of the temperature is
continuous and progressive starting
from left to right.
The demisting/defrosting switch-
es off automatically to prevent
excessive consumption of power.
B. PASSENGER'S CONTROL PANEL