2009 FIAT DOBLO phone

37
On your mobile phone, look for the
option that finds in-range Blue-
tooth
®devices (it may be called
Find, Add Device, etc.). From the list
of available Bluetooth
®devices,
choose “Blue&Me” (the name that
identifies the Blue&Me™system
on your vehicle).
When prompted by your phone, en-
ter the PIN number shown on the
instrument panel display. If the reg-
istration was successful, the system
will say “Connection in progress”
and you get confirmation at the end
when the display shows details of the
mobile phone registered.
It is important to wait for this con-
firmation message – if you press
ß/MENUor &/ESCbefore it ap-
pears, you risk cancelling the regis-
tration process. If registration fails,
an error message will appear; in this
case, you will need to start again.The first time a mobile phone is reg-
istered, the system says “Wel-
come” as soon as it is connected.
This welcome message will not be
delivered during subsequent regis-
trations or connections of the same
mobile phone.
The system will ask you if you want
to copy across the contacts of the
phone you have just registered.
Copying the phonebook is recom-
mended.
To copy the contacts, press SRC/
OKor
ß/MENU. If you do not
want to copy the phonebook, press
&/ESC. If you do not copy the
phonebook at this point, you can
copy it later by choosing SET-
TINGS, USER DATA, CON-
TACTS.
On some mobile phones, the names
in the phonebook are not copied
automatically, but have to be trans-
ferred by using the mobile phone
keypad. If prompted by the system,
carry out this procedure following
the specific instructions for your
mobile phone and press
ß/MENU
when you have finished.
}
Or, with voice interaction:
Press
‘and say “Settings” and
then, at the end of the message from
the system, say “Register user”.
The system displays the PIN code
for registration on the instrument
panel and repeats it out loud.
For the next two stages, consult
your mobile phone manual on how
to register and connect with Blue-
tooth
®devices.
On your mobile phone, look for the
option that finds in-range Blue-
tooth
®devices (it may be called
Find, Add Device, etc.). From the list
of available Bluetooth
®devices,
choose “Blue&Me” (name that
identifies your vehicle's hands-free
system).
When prompted by your mobile
phone, enter the PIN code shown
on the display with your mobile
phone keypad. If the registration
was successful, the system will say
“Connection in progress” and
you get confirmation at the end
when the display shows details of
the mobile phone registered.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 37

38
It is important to wait for this con-
firmation message – if you press
ß/MENUor &/ESCbefore it ap-
pears, you risk cancelling the regis-
tration process. If registration fails,
an error message will appear; in this
case, you will need to start again.
The first time a mobile phone is reg-
istered, the system says “Welcome”
as soon as it is connected. This wel-
come message will not be delivered
during subsequent registrations or
connections of the same mobile
phone.
The system will ask you if you want
to copy the phonebook from the
phone you have just registered.
Copying the phonebook onto the
system is recommended. To copy
the phonebook, say “Yes”. If you do
not want to copy the phonebook,
say “No”.
On some mobile phones, the names
in the phonebook are not copied au-
tomatically, but have to be trans-
ferred by using the mobile phone
keypad. If prompted by the hands-
free system, carry out this procedure
following the specific instructions for
your mobile phone and press
ß/MENUwhen you have finished.Suggestions
To improve the voice recognition of the
names in your phonebook and the pro-
nunciation accuracy of Blue&Me™, try
to enter and save your contacts as follows:
❒Avoid abbreviations.
❒Write foreign names the way they are
pronounced according to the rules of
the Blue&Me™language set on your
vehicle. For example, it is advisable to
enter “Thorsten” as “Torsten” to im-
prove recognition and get the system to
pronounce the names correctly.
❒When you add or amend names in the
phonebook, enter the appropriate signs
for any accents so that they are pro-
nounced correctly and recognised by the
system. For example, it is advisable to
enter “Nicolo Rebora” as “Nicolò Réb-
ora” to get the correct pronunciation.
❒When you add or amend names in the
phonebook, remember that some isolat-
ed upper-case letters can be read as ro-
man numerals (e.g. V can be read as five).
❒When you call people using voice
recognition, do not use shortened ver-
sions of the name or middle initials. N.B.
❒You only need to register your phone
once.
❒You can register up to five mobile
phones on the system, which can be
used one at a time.
❒To connect a mobile phone to
Blue&Me™that has already been reg-
istered, you always need to switch on
the phone's Bluetooth
®setting.
❒Before you transfer the contacts from
your mobile phone to the hands-free
system, make sure the name of each
person is unique and clearly recognis-
able so that the voice recognition sys-
tem works properly.
❒The system will copy only valid con-
tacts, i.e. those containing a name and
at least one phone number.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 38

39
❒If you want to register your mobile phone
again, you must first cancel the old regis-
tration. During this operation, all the user
data registered on the system will be
deleted. To delete the old
registration, se-
lect USER DATA, DELETE USERS.
Delete the “Blue&Me” device from the
list of Bluetooth®devices on your mo-
bile phone, following the instructions in
your mobile phone manual.
❒If a phonebook is copied that contains
more than 1000 names, the system may
operate more slowly and the voice
recognition of the names in your
phonebook may be impaired.
❒If you accidentally cancel your registra-
tion, you will need to repeat the
process. MANAGING USER DATA
It is possible to amend the user data saved
on the hands-free system. In particular,
you can delete the data relating to the mo-
bile phones registered on the system,
delete the active phonebook at a given
moment or delete both at the same time.
In this way, the system is restored to its
original settings. It is also possible to trans-
fer the phonebook or individual contacts
from the mobile phone to the hands-free
system, if this has not been done during
the registration process. You can amend
the data used by the system by choosing
USER DATA.
?
To access the USER DATAmenu
manually, proceed as follows:
Activate the Main Menu by pressing
ß/MENUand select SETTINGS
by pressing SRC/OKor
ß/MENU.
Select USER DATAand then press
SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘and say “Settings” and
then, after the message from the
system, say “User Data”.
In the USER DATAmenu, you
can perform the functions described
below.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 39

40
Delete the registered users
In the USER DATAmenu, you can
delete registrations. Once you have done
so, you can no longer use the hands-free
system with an unregistered mobile
phone, nor can you use your phonebook,
until the mobile phone is registered again.
It is important to know that this operation
will delete all registrations on the system.
?
To manually delete the registration
data for all users, proceed as follows:
Select the DELETE USERS op-
tion and then press SRC/OKor
ß/MENU.
The system will display the message
DELETE USERS?. To delete the
user data, confirm by pressing
SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘, say “Settings” and then,
after the message from the system,
say “Delete Users”.
The system will ask “Delete all
registered users?”. To confirm,
say “Yes”.
N.B.
❒Always remember that, if a mobile
phone is registered on the system while
another phone is already connected,
the existing connection is broken and
the new phone is connected.
❒It is not possible to delete the user da-
ta for a single mobile phone if it is not
the only one registered.
❒After the user data is deleted, you will
need to register a mobile phone again.Delete the phonebook
In the USER DATA menu, you can al-
so delete the phonebook copied onto the
system.
?
To delete the current phonebook
manually, proceed as follows:
Select the DELETE CON-
TACTSoption and then press
SRC/OKor
ß/MENU.
The system will display the question
DELETE CONTACTS?. To
delete the phonebook, confirm by
pressing SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘, say “Settings” and then,
after the message from the system,
say “Delete contacts”.
The system will ask “Delete the
copy of the contacts from the
vehicle?”. To confirm, say “Yes”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 40

41
Copy the phonebook
If you chose not to copy the phonebook
during registration or you have recently
deleted your contacts, go into the USER
DATAmenu and choose CONTACTS.
?
To manually copy the phonebook
from a registered phone, proceed as
follows:
Select CONTACTSand then press
SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘, say “Settings” and then,
after the message from the system,
say “Copy contacts”.Add contacts
If your phone does not support auto-
matic phonebook transfer during regis-
tration, go to the USER DATAmenu
and choose ADD CONTACTS.
?
To manually transfer the contacts on
your mobile phone to the hands-free
system, proceed as follows:
Select ADD CONTACTSand
then press SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘, say “Settings” and then,
after the message from the system,
say “Add contacts”.
Then follow the instructions in your mo-
bile phone manual on transferring contacts
from the phone to another device. Delete all data
?
To manually restore the hands-free
system to its original settings, delet-
ing all the data and the contacts for
all the phones registered, proceed
as follows:
Select the DELETE ALLoption and
then press SRC/OKor
ß/MENU.
The system will display the question
Delete all?. To delete all data,
confirm by pressing SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘, say “Settings” and then,
after the message from the system,
say “Delete all”.
The system will ask “Delete all da-
ta saved to the vehicle by
users?”. To confirm, say “Yes”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 41

43
Changing the GPRS
connection code
If you need to change your mobile phone's
GPRS connection settings, you can do so
in the ADV. OPTIONS menu.
?
To change the GPRS connection
code manually:
Move to the GPRS Codemenu
and press SRC/OKor
ß/MENU.
GPRS: will appear on the display,
with a list of numbers (1, 2, 3, 4, 5,
6, 7, 8, 9), PRESET, and DIS-
ABLE. To select a new code for the
GPRS connection, press
Nor Ountil the desired option appears,
then press SRC/OKor
ß/MENU.
To keep the preset value, select
PRESET. To disable the connection
code, choose DISABLE.
After having reset the GPRS con-
nection code, Blue&Me™will dis-
play the message CODE SET.
}
To set the GPRS connection code
using voice interaction:
Press
‘and say “Settings” and
then “Connection code”.
Blue&Me™will reply with “The
current GPRS connection code is
current code. To change the code, say
a number from 1 to 9, or say “Pre-
set”. To disable it, say “'Disable'.
To change the code, say a number
from 1 to 9, or say “Preset”. To dis-
able the code, say “Disable”. (In the
earlier sentence, current codeis the
value set for the GPRS connection
code at the time of use).
After having set the new connection
code, Blue&Me™responds with
“The connection code is new code”.
(In the previous sentence, new code
is the new value set for the GPRS
connection). EXITING THE SETTINGS MENU
At the end of each operation you can ex-
it the settings menu as follows.
?
To manually exit the SETTINGS
menu:
Select the EXIToption and press
SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘and say “Exit”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 43

44
Blue&Me™communicates with your per-
sonal devices using USB and Bluetooth®
technology.
To get updated information on the com-
patibility of personal devices with
Blue&Me™, contact a Fiat Dealership or
go to the dedicated area on www.fiat.com.
MOBILE PHONES WITH
Bluetooth
®TECHNOLOGY
Blue&Me™is compatible with most mo-
bile phones that support Bluetooth
®1.1
and the 1.5 HandsFree profile (refer to the
Bluetooth
®connection specifications in
your mobile phone handbook).
As a result of the different software ver-
sions available on the market for differ-
ent models of mobile phone, some addi-
tional functions (e.g. second call manage-
ment, call transfer from hands-free system
to mobile phone and vice versa, etc.) may
not correspond exactly to the description
in the mobile phone user manual. In any
case, your ability to have a hands-free con-
versation is not compromised. Mobile phones with
phonebook management
If your mobile phone is able to automatically
transmit contacts via Bluetooth
®, the en-
tire phonebook will automatically be copied
onto Blue&Me™during registration.
To see the list of mobile phones and func-
tions supported, go to the the Blue&
Me™section of www.fiat.com or call
Customer Services on 800.3428.0000.
Here, you can find:
❒a quick guide with usage tips;
❒a guide to using a mobile phone for reg-
istration;
❒advice on connecting an iPod;
❒the nine available voice recognition lan-
guage files that can be downloaded in-
dividually onto Blue&Me™(Italian,
French, English, German, Spanish, Por-
tuguese, Dutch, Polish, Brazilian).Mobile phones with individual
contact management
If your mobile phone is able to transmit
individual phonebook contacts via Blue-
tooth
®, during the registration procedure
you will be asked to transfer the names us-
ing your phone.
Mobile phones with SMS message
management (not all mobiles
support listening to incoming text
messages)
If your mobile phone is able to transmit
SMS messages via Bluetooth
®, you can
read incoming texts via the Blue&Me™
hands-free system, save them to an inbox
or delete them.
TECHNOLOGY COMPATIBLE WITH Blue&Me™
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 44

45
USB STORAGE DEVICES
The Media Player is compatible with most
USB 1.0, 1.1 or 2.0 mass storage devices.
MANAGING AUDIO FILES FROM
iPod DEVICES
To optimise the connection of your iPod
with Blue&Me™, you should carry out a
few simple operations on your iPod:
❒configure the iPod for use as an external
disc, referring to the iPod user manual;
❒if the configuration has been made on
an Apple computer, configure it in
Windows;
❒save the music tracks as audio files
compatible with Blue&Me™.
These operations do not compro-
mise the sound quality or usability of
iPod tracks.What I can do
❒Listen to tracks in digital quality
❒Select tracks (by artist, album, genre,
etc.) through voice control or by us-
ing the steering wheel controls
❒Display information about the track be-
ing played (song title, singer, etc.) on the
instrument panel.
❒Recharge the iPod through the USB
port.
What I cannot do
❒Play audio tracks from iPod devices not
configurable as external disks or
iPhones (without Blue&Me™Media
Player adapter, see Note below).
N.B.
A Blue&Me™ Media Player adapter is
available from Lineaccessori Fiat, allow-
ing you to play music tracks from iPod or
iPhone models that cannot be configured
as an external disk.N.B.
USB devices with a password function are
not recommended. If your USB device has
such a function, always check that it has
been deactivated.
The Media Player has only one multime-
dia library. When a new USB device is in-
serted, Blue&Me™creates a new library
to replace the existing one.
COMPATIBLE USB STORAGE DEVICES
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 45