16
Using voice recognition
The voice recognition system, sometimes,
can make a mistake when recognising
a voice command. To make sure you that
your voice commands are always recog-
nised, use the following guidelines:
❒After having pressed ‘, give the voice
command after the system has provid-
ed the audible signal indicating that
voice recognition is on.
❒After the system has asked you a ques-
tion, wait a second before giving the an-
swer, in order to be sure that voice
recognition is on.
❒If you want to give a command without
waiting for the system to finish its mes-
sage or question, you can briefly press
the
‘button again to interrupt the sys-
tem and give your command.
❒Speak at a normal volume.
❒Say the words clearly: not too quickly,
but without hesitation.
❒If possible, try to reduce noise inside the
passenger compartment to a minimum.
❒Before giving voice commands, ask your
passengers not to speak. Since the sys-
tem recognises the words regardless of
who speaks, if several people speak at
the same time, the system may pick up
different or additional words to those
that you have said.
❒For optimum operation it is advisable
to close the sunroof if your vehicle has
one. N.B.
For countries where a mother-tongue
version is not available, voice recognition
of the commands and especially the
phonebook contacts could be difficult. We
advise adopting pronunciation that con-
forms to the language in Blue&Me™.
To change the voice recognition language,
contact a Fiat Dealership or see the dedi-
cated section on www.fiat.it.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 16
