15
If the user gives a valid level 1 voice com-
mand, the sub-menu for that command re-
mains activated until a voice command
leading to another level is given or the in-
teraction is interrupted; the same rule ap-
plies for lower levels (2 and 3).
For a list of all the available voice com-
mands, refer to the LIST OF AVAILABLE
VOICE COMMANDS section.
To listen again to the last message given
by the system, press
‘for more than
one second or briefly press
‘and say
“Repeat”.
It is possible that the hands-free system
will provide spoken information. A vocal
announcement is a voice message spoken
directly by the system. To stop a vocal an-
nouncement, press
&/ESC, or press ‘and say “Cancel”.
A vocal interaction is an exchange of com-
munication/commands between the hands-
free system and the user. To start a vocal
interaction, press
‘and give a command.
To stop an interaction and start a new one,
press
‘at any time during the interaction
and give a voice command.
To end an interaction, press
&/ESC. You
will hear a signal indicating that voice
recognition has been deactivated.The help function can provide you, at any
time, with a list of commands available for
the level you are at. To use the help sys-
tem, say “Help”, listen to the list of com-
mands available and decide which com-
mand to give to the system.
Adjust the volume to the level that is best
for you with the vehicle in motion.
To adjust the preset Blue&Me™volume,
refer to the “EXTERNAL AUDIO func-
tion” section in the sound system in-
struction manual. To temporarily adjust
the volume of an ongoing call, press +
or−or turn the sound system knob. At
the end of the call, the volume will return
to its original level.
You can also press +or −to adjust the
volume of a vocal announcement while it
is being said by Blue&Me™.
Remember that to interrupt a vocal an-
nouncement you can press
‘at any time
during a vocal interaction and provide
a new voice command.N.B.
❒Instructions on using the system
through voice commands are shown in
the text by the symbol
}.
❒After having pressed ‘, if you do not
give a voice command within a few sec-
onds, the system will ask you to give
a voice command. If you do not re-
spond, voice recognition is deactivated.
This also happens if you do not provide
a response to a question from the sys-
tem. In these cases, you will hear a sig-
nal indicating that voice recognition has
been deactivated.
❒When the system fails to recognise
your voice command, it will give you an-
other chance to give the command. If
you are not sure that the voice com-
mand is correct at a given level, say
“Help”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 15
23
MANAGING AN
INCOMING CALL
With the hands-free function, you can re-
spond to incoming calls using the steer-
ing wheel controls. When a call is re-
ceived, the system will display the caller's
ID, where available.
The incoming call will be signalled by your
mobile phone's personalised ringtones
(the availability of this function depends on
the specific features of your phone).
Answering a phone call
❒To answer a call, press ß/MENU.
❒To end the call, press ß/MENUfor
more than one second.
Rejecting a phone call
❒To reject a call, press ß/MENUfor
more than one second.
Ignoring a phone call
❒To ignore a call and mute the ringtone,
press
&/ESC.Answering an incoming
call during a conversation
To answer an incoming call whilst anoth-
er conversation is in progress, press
ß/MENU. The system will switch to the
incoming phone call and will put the cur-
rent conversation on hold.
N.B.
Some mobile phones offer the possibility
of forwarding ringtones associated with
your contacts to the hands-free system. In
this case, the system signals incoming calls
by using your mobile phone's personalised
ringtones.MANAGING AN
ONGOING CALL
Transferring a call
from your mobile phone to the
hands-free system
If you are speaking on your mobile phone
and get into the vehicle, you can transfer
the conversation from your mobile to your
vehicle's hands-free system.
Proceed as follows:
❒Get into the car and turn the ignition
key to MARto activate the hands-free
system.
❒The system will let the phone know
when it is ready to activate hands-free.
❒To transfer the conversation to hands-
free, follow the normal procedure for
your mobile phone (the procedure will
depend on the type of phone).
❒The phone conversation will be trans-
ferred to the vehicle's hands-free system.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 23
