2009 FIAT DOBLO reset

14
SOUND SYSTEM CONTROLS
The
N/O/¯/˙buttons on the front of
the sound system activate the following
in Media Player mode:
NOSelect previous/next folder/artist/
genre/album depending on the se-
lection mode enabled
¯˙Play previous/next track
VOICE COMMANDS
You do not need to alter your normal dri-
ving position for your voice commands to
be recognised by the system. In fact, the
microphone is correctly positioned and di-
rected for this purpose.
The words that are recognised by the sys-
tem are identified as voice commands.
The hands-free system recognises and re-
sponds to a preset list of voice commands.
The list of voice commands available de-
pends on the point you are at in the hands-
free system menu. The list of voice com-
mands available is accessible at any time by
pressing
‘and saying “Help”, or by say-
ing “Help” after a message from the sys-
tem. Blue&Me™also recognises per-
sonalised voice commands, such as, for ex-
ample, the names in your contacts.To use the voice commands, the voice
recognition system does not need time to
learn your voice.
To give the system a voice command,
press
‘and wait for the audible signal in-
dicating that the voice recognition system
is activated; you can now give the com-
mand in your normal voice – not too
quickly, but without hesitation. When the
system recognises the command, it will re-
spond or perform an action.
The voice commands are divided into lev-
el 1, level 2 and level 3.
When a valid* level 1 voice command is
given, the system is ready to recognise lev-
el 2 voice commands; when a valid level
2 voice command is given, the system is
ready to recognise level 3 voice com-
mands.
* Validmeans that the voice command is part of the Blue&Me™vocabulary and therefore recognisable at a given level.
USING Blue&Me™
STEERING WHEEL CONTROLS
The steering wheel controls (see fig. 1)
are for the hands-free functions, activat-
ing voice recognition, the Media Player
functions or selecting an option from the
Blue&Me™menu.
Some commands have different functions
in relation to the status of the system at
a given moment.
The function selected in response to the
pressing of a button depends, in some cas-
es, on how long the button is held down for.

For more information, see the DISPLAY
AND STEERING WHEEL CONTROLS
section.
N.B.
Instructions on using the system through
manual controls are shown in the text by
the symbol
?.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 14

15
If the user gives a valid level 1 voice com-
mand, the sub-menu for that command re-
mains activated until a voice command
leading to another level is given or the in-
teraction is interrupted; the same rule ap-
plies for lower levels (2 and 3).

For a list of all the available voice com-
mands, refer to the LIST OF AVAILABLE
VOICE COMMANDS section.
To listen again to the last message given
by the system, press
‘for more than
one second or briefly press
‘and say
“Repeat”.
It is possible that the hands-free system
will provide spoken information. A vocal
announcement is a voice message spoken
directly by the system. To stop a vocal an-
nouncement, press
&/ESC, or press ‘and say “Cancel”.
A vocal interaction is an exchange of com-
munication/commands between the hands-
free system and the user. To start a vocal
interaction, press
‘and give a command.
To stop an interaction and start a new one,
press
‘at any time during the interaction
and give a voice command.
To end an interaction, press
&/ESC. You
will hear a signal indicating that voice
recognition has been deactivated.The help function can provide you, at any
time, with a list of commands available for
the level you are at. To use the help sys-
tem, say “Help”, listen to the list of com-
mands available and decide which com-
mand to give to the system.
Adjust the volume to the level that is best
for you with the vehicle in motion.
To adjust the preset Blue&Me™volume,
refer to the “EXTERNAL AUDIO func-
tion” section in the sound system in-
struction manual. To temporarily adjust
the volume of an ongoing call, press +
or−or turn the sound system knob. At
the end of the call, the volume will return
to its original level.
You can also press +or −to adjust the
volume of a vocal announcement while it
is being said by Blue&Me™.
Remember that to interrupt a vocal an-
nouncement you can press
‘at any time
during a vocal interaction and provide
a new voice command.N.B.
❒Instructions on using the system
through voice commands are shown in
the text by the symbol
}.
❒After having pressed ‘, if you do not
give a voice command within a few sec-
onds, the system will ask you to give
a voice command. If you do not re-
spond, voice recognition is deactivated.
This also happens if you do not provide
a response to a question from the sys-
tem. In these cases, you will hear a sig-
nal indicating that voice recognition has
been deactivated.
❒When the system fails to recognise
your voice command, it will give you an-
other chance to give the command. If
you are not sure that the voice com-
mand is correct at a given level, say
“Help”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 15

43
Changing the GPRS
connection code
If you need to change your mobile phone's
GPRS connection settings, you can do so
in the ADV. OPTIONS menu.
?
To change the GPRS connection
code manually:
Move to the GPRS Codemenu
and press SRC/OKor
ß/MENU.
GPRS: will appear on the display,
with a list of numbers (1, 2, 3, 4, 5,
6, 7, 8, 9), PRESET, and DIS-
ABLE. To select a new code for the
GPRS connection, press
Nor Ountil the desired option appears,
then press SRC/OKor
ß/MENU.
To keep the preset value, select
PRESET. To disable the connection
code, choose DISABLE.
After having reset the GPRS con-
nection code, Blue&Me™will dis-
play the message CODE SET.
}
To set the GPRS connection code
using voice interaction:
Press
‘and say “Settings” and
then “Connection code”.
Blue&Me™will reply with “The
current GPRS connection code is
current code. To change the code, say
a number from 1 to 9, or say “Pre-
set”. To disable it, say “'Disable'.
To change the code, say a number
from 1 to 9, or say “Preset”. To dis-
able the code, say “Disable”. (In the
earlier sentence, current codeis the
value set for the GPRS connection
code at the time of use).
After having set the new connection
code, Blue&Me™responds with
“The connection code is new code”.
(In the previous sentence, new code
is the new value set for the GPRS
connection). EXITING THE SETTINGS MENU
At the end of each operation you can ex-
it the settings menu as follows.
?
To manually exit the SETTINGS
menu:
Select the EXIToption and press
SRC/OKor
ß/MENU.
}
Or, with voice interaction:
Press
‘and say “Exit”.
604_39_206 DOBLO BLUE GB 1ed 17-09-2009 16:55 Pagina 43