2009 FIAT CROMA Blue And Me Instant Navigation Manual

48
BLUE&ME
™
in conjunction with Instant Nav
?To access the USER DATA menu
through manual interaction, proceed
as follows: Activate the Main Menu by
pressing
ßand select the Settings op-
tion by pressing OKor
ß.
Select the option USER DATA and
then press OKor
ß.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “User Data”. You can car-
ry out the functions described below
in the USER DATA menu.
Delete the registered users
You can delete registrations made in the
USER DATA menu. Following this oper-
ation, you can no longer use the hands
free system with a mobile phone that is
not registered and you also cannot use
your phone directory until you register
your mobiel phone again.
It is important to know that this opera-
tion will delete all registrations created on
the system.
?To delete the registration data for all
users, using manual interaction, pro-
ceed as follows:
Select the option DELETE USERS and
then press OKor
ß.
The system will display the message
DELETE USERS? To delete the user
data, confirm by pressing OKor
ß.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Delete Users”.
The system will ask “Delete all regis-
tered users?” To confirm, say “Yes”.
Notes
– Always remember that if a mobile
phone is registered on the system whilst
another phone is connected, the connec-
tion with the telephone connected at that
time will be interrupted and the new tele-
phone will be connected.
– It is not always possible to delete user
data for a single mobile phone unless it is
the only one registered.
– After deleting all the user data a new
mobile phone must be registered.Delete the phone list
It it also possible to delete the phone list
copied onto the system in the USER DA-
TA menu.
?To delete the current phone list,
through manual interaction, proceed
as follows:
Select the option DELETE DIREC-
TORY and then press OKor
ß. The
system will display the question Delete
directory? To delete the directory,
confirm by pressing OKor
ß.
}Or, through voice commands:
Press
‘, say “Settings” and then, at
the end of the message from the sys-
tem say “Delete directory”.
The system will ask “Delete the copy
of the directory from the car?” To con-
firm, say “Yes”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 48

49
BLUE&ME
™
in conjunction with Instant Nav
Copy the phone book
If you have chosen not to copy the
phone book during the registration pro-
cedure or you have deleted the recent
phone list, the Directory option is avail-
able in the USER DATA menu.
?To copy the phone list from a regis-
tered mobile phone, through manual
interaction, proceed as follows:
Select the option DIRECTORY and
then press OKor
ß.
}Or, through voice commands:
Press
‘, say “Settings” and then, at
the end of the message from the sys-
tem say “Copy directory”.Add contacts
If your mobile phone does not support
the automatic saving of the phone list
whilst registering the telephone, the ADD
CONTACTS option will be available in
the USER DATA menu.
?To transfer the names in the mobile
phone to the hands free system, us-
ing manual interaction, proceed as fol-
lows:
Select the option ADD CONTACTS
and then press OKor
ß.
}Or, through voice commands:
Press
‘, say “Settings” and then, at
the end of the message from the sys-
tem say “Add contacts”.
Then follow the instructions in your mo-
bile phone manual relating to the trans-
fer of contacts from the phone to anoth-
er device. Delete all data
?To restore the initial hands free sys-
tem settings, deleting all the data and
the phone lists/contacts for all regis-
tered phones, using manual interac-
tion, proceed as follows:
Select the option DELETE all and then
press OKor
ß.
The system will display the question
DELETE ALL? To delete all the data,
confirm by pressing OKor
ß.
}Or, through voice commands:
Press
‘, say “Settings” and then, at
the end of the message from the sys-
tem say “Delete all”.
The system will ask “Delete all data
saved by users in the car?” To confirm,
say “Yes”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 49

50
BLUE&ME
™
in conjunction with Instant Nav
REGISTERING A MOBILE
PHONE
In order to use your mobile phone with
the car’s hands free function it must be
registered. During the registration proce-
dure the hands free system will search for
a telephone with Bluetooth
®in its re-
ception range. If it finds it, it will establish
the connection using a PIN (Personal Iden-
tification Number). After having registered
your mobile phone in the system it can be
used through the hands free system.
IMPORTANT The PIN code used for
registering a mobile phone is produced
randomly by the system each time a new
phone is registered, therefore it does not
have to be memorized and if it is mislaid
it will not affect the use of the hands free
system.
The procedure for registering your mo-
bile phone only has to be carried out once;
afterwards the system will automatically
connect your phone each time you get in-
to the car and turn the ignition key to the
MAR position.You can register your mobile phone us-
ing the Registration option in the Settings
menu.
?To register through manual interac-
tion, proceed as follows:
Activate the Main Menu by pressing
ßand select the Settings option by
pressing OKor
ß.
Select the option Registration and
then press OKor
ß. The system will
launch the registration procedure.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally. It is important to
know that this PIN is only used once
for registering the mobile phone and
it is not the PIN for the your SIM card.
For the two subsequent stages, con-
sult your mobile phone manual for
how to register and connect with
Bluetooth
®devices.Look, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the oper-
ating range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
present (the name identifies the sys-
tem on your car).
When the mobile requests it, enter
the PIN number on the panel display.
If the registration has been success-
ful, the system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 50

51
BLUE&ME
™
in conjunction with Instant Nav
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. The system
will no longer give this welcome dur-
ing subsequent registration proce-
dures or when the same mobile phone
is connected.
The system will ask you if you want to
copy the phone list as soon as the
phone is registered. It is advisable to
copy the directory. To copy the di-
rectory, press OKor
ß. If you don’t
want to copy the directory, ESC. If
you do not copy the directory at this
point, you can copy it later on using
the SETTINGS, USER DATA, DIREC-
TORY MENU.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the system asks you, carry
out this procedure following the spe-
cific instructions in your mobile phone
and press
ßwhen you have finished.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Register user”.
The system will show the PIN code re-
quired for registering the mobile
phone on the panel display and it will
repeat it vocally.
For the next two stages, consult your
mobile phone manual for how to reg-
ister and connect devices with Blue-
tooth
®.
Search, on your mobile phone, for the
option that allows you to display de-
vices with Bluetooth
®in the operat-
ing range (this option may be called
Search, New Device, etc. on your mo-
bile phone). Select “Blue&Me” from
the devices enabled for Bluetooth
®
(the name that identifies the hands free
system for your car).When the mobile phone asks you, en-
ter the PIN shown in the display us-
ing your mobile phone keypad. If the
registration has been successful, the
system will say “Connection in
progress” and at the end will show the
number of the mobile phone regis-
tered on the display as confirmation.
It is important to wait for this confir-
mation message, if you press
ßor
ESCbefore this message appears you
risk cancelling the registration process.
If the registration fails, an error mes-
sage will appear; the procedure will
have to be repeated in this case.
The first time you register a mobile
phone the system will say “Welcome”
straight after connection. In subse-
quent registration procedures or
when connecting the same mobile
phone, the system will give this wel-
come message.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 51

52
BLUE&ME
™
in conjunction with Instant Nav
The system will ask you if you want to
copy the directory for the phone just
registered. It is advisable to copy the
directory onto the system. To copy
the directory, say “Yes”. If you don’t
want to copy the directory, say “No”.
On some mobile phones the names in
the directory are not copied auto-
matically, but have to be transferred
by the user using the mobile phone
keypad. If the hands free system asks
you, carry out this procedure follow-
ing the specific instructions in your
mobile phone and press
ßwhen you
have finished.Suggestions
To improve the voice recognition of the
names in your phone list and the accura-
cy of the pronounciation of the system, try
and enter the names in your directory and
save them using the following criteria:
– Avoid abbreviations.
– Write foreign names the way they are
pronounced, according to the system lan-
guage rules set on your car. For example,
it is advisable to enter “Jonathan” as “Giò-
natan”, to improve the recognition accu-
racy and produce the correct pronoun-
ciation by the system.
– When you add or alter names in the
directory, put in the appropriate accents
when required by the names so that they
are correctly pronounced and recognized
by the system. For example “Nicolo Reb-
ora” should be entered as “Nicolò Réb-
ora” to produce the correct pronouncia-
tion.
– When you add or alter names in the
directory, consider that some capital let-
ters on their own may look like Roman
numerals (e.g.: V may be read as fifth).
– When you are calling people using
voice recognition, omit abbreviated names
or middle initials. Notes
– Your mobile phone only has to be reg-
istered once.
– Up to five mobile phones can be reg-
istered on the system but can only used
one at a time.
– To connect a mobile phone that has
already been registered to the system the
Bluetooth
®setting on the mobile phone
you wish to connect must always be acti-
vated.
– Before transferring the names from
your mobile phone to the hands free sys-
tem, make sure that the name of each per-
son is unique and distinctively recogniz-
able so that the voice recognition system
works properly (you cannnot automati-
cally download the directory on all mobile
phones).
– The system will only copy valid names,
i.e. those that contain a name and at least
one telephone number.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 52

53
BLUE&ME
™
in conjunction with Instant Nav
– If you want to register your mobile
phone again, the old registration must be
deleted first. All the user data registered
in the system is deleted during this oper-
ation. To delete the old registration, use
the USER DATA, DELETE USERS option.
On your mobile phone, delete the
“Blue&Me” device from the list of Blue-
tooth
®devices following the instructions
in your mobile phone manual (you cannot
automatically download the directory on
all mobile phones).
– If you copy a phone directory that
contains more than 1000 names, the sys-
tem may work slowly and there may be
a deterioration in the voice recognition of
the names in your phone directory.
– If the registration you have made is in-
advertently cancelled, the procedure will
have to be repeated. ADVANCED OPTIONS
?To access the ADVANCED OP-
TIONS menu, using manual interac-
tion, proceed as follows:
Access the Main Menu by pressing
ßand select the SETTINGS OPTION by
pressing OKor
ß.
Select the ADVANCED OPTIONS
menu and then press OKor
ß.
}Or, through voice commands:
Press
‘and say “SETTINGS” and
then “ADVANCED OPTIONS”.
In the ADVANCED OPTIONS, you
can access the SYSTEM CODE and
change the GPRS code.
Note
The SYSTEM CODE is an 8 digit num-
ber which unequivocally identifies the sys-
tem on your vehicle and cannot be
changed.Access to system code
To carry out some of the operations it
may be necessary to know the identifica-
tion code for your system.
?To access this code, through manual
interaction, proceed as follows:
Select the option SYSTEM CODE: and
then press OKor
ß.
The panel display will show the code
for your system.
To exit this display, press OKor
ßor ESC.
}Or, through voice commands:
Press
‘and say “Settings” and then,
at the end of the message from the
system say “Read code”.
The panel display will show the code
for your system.
To exit this menu option, press OK
or
ßor ESC.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 53

54
BLUE&ME
™
in conjunction with Instant Nav
Changing the GPRS connection
code
If the mobile phone service provider re-
quires the setting for the GPRS connec-
tion to be changed, you can do this in the
ADVANCED OPTIONS menu.
?To change the GPRS connection code,
using manual interaction:
Move to the GPRS CODE menu and
press OKor
ß.
GPRS should appear on the display
with a list of digits (1, 2, 3, 4, 5, 6, 7,
8, 9), PREDEF. and DISABLE. To se-
lect a new code for the GPRS con-
nection, press
QorZuntil the de-
sired option appears, then press OK
or
ß. To choose to keep the prede-
fined value, select Predef. To disable
the connection code, select DISABLE
After having reset the GPRS connec-
tion code, the system will display the
message CODE SET.
}To set the GPRS connection code, us-
ing voice commands:
Press
‘and say “Settings” and then
“Connection code”.
The system will reply with the current
GPRS connection code and the cur-
rent value. To change it, say a num-
ber from 1 to 9 or say “Predefined”.
To disable it, say “Disable”. To change
the code, say a number from 1 to 9 or
say “Predefined”. To disable the code,
say “Disable”. (In the previous sen-
tence, the current value is the value
set for the GPRS connection code at
the time it is used).
After having set the new connection
code, the system will reply with “The
connection code is at the new value”
(In the previous sentence the new val-
ue is the value set for the GPRS con-
nection). EXIT FROM MENU SETTINGS
It is possible to exit the settings menu at
the end operation as described below.
?To exit the Settings menu, using man-
ual interaction:
Select the option EXIT and then press
OKor
ß.
}Or, through voice commands:
Press
‘and say “Exit”.
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 54

55
BLUE&ME
™
in conjunction with Instant Nav
The system will communicate with your
personal devices via Bluetooth®and the
USB.
For up to date information on the com-
patibility of personal devices with the sys-
tem, ask to Fiat Dealership or consult the
dedicated area on www.fiat.com.MOBILE PHONES WITH
Bluetooth®
The system is compatible with most mo-
bile phones that support Bluetooth®1.1
and the 1.5 HandsFree profile (refer to the
Bluetooth
®connection specifications in
the mobile phone handbrook).
As a result of the different possible soft-
ware versions available on the market for
different models of mobile phone, some
additional functions (e.g.: second call man-
agement, call transfer from hands free sys-
tem to mobile phone and vice versa, etc.)
may not correspond exactly to the de-
scription in the mobile phone instruction
manual. In any case, the possibility of car-
rying out a hands-free conversation will
not be compromised. Mobile phones with directory
management
If your mobile phone has the capability
of automatically transmitting the phone di-
rectory via Bluetooth
®, the entire phone
list will automatically be copied onto the
system during the registration procedure.
To consult the list of mobile phones and
functions supported go to the dedicated
website www.fiat.com under the system
section or call customer services on
800.3428.0000.
You will also find:
– a quick guide with advice on usage;
– a guide for using your mobile phone
for registering;
– advice on connection to an iPod;
– the files in the 8 voice recognition lan-
guages available that can be down-
loaded onto the system (Italian,
French, English, German, Spanish, Por-
toguese, Dutch, Polish) as an alterna-
tive.
T T
E E
C C
H H
N N
O O
L L
O O
G G
Y Y

C C
O O
M M
P P
A A
T T
I I
B B
L L
E E

W W
I I
T T
H H

T T
H H
E E

S S
Y Y
S S
T T
E E
M M
603_97_160 CROMA_BLUE INSTANT NAV_GB_1ed 5-05-2009 15:52 Pagina 55