2008 INFINITI FX35 Brake System

AT-76
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS
43Slips/Will
Not En-
gage No creep at all.
Refer to
AT- 1 7 5 , "
Ve-
hicle Does Not Creep
Backward in "R" Posi-
tion", AT- 1 7 8 , "Vehicle
Does Not Creep For-
ward in "D" Position"
ON vehicle 1. A/T fluid level and state
AT- 4 9
2. Line pressure testAT- 4 9
3. Accelerator pedal position sensorAT- 1 3 0
4. Direct clutch solenoid valveAT- 1 4 7
5. PNP switchAT- 1 0 2
6. CAN communication line AT- 9 4
7. A/T positionAT- 2 0 7
8. Control valve with TCMAT- 2 1 5
OFF vehicle9. Torque converter
AT- 2 6 7
10. Oil pump assemblyAT- 2 8 5
11. 1st one-way clutchAT- 2 9 5
12. Gear systemAT- 2 4 9
13. Reverse brakeAT- 2 6 7
14. Direct clutchAT- 3 0 3
15. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to AT-
16, "Cross-Sectional View (2WD Models)", AT- 1 7 , "Cross-
Sectional View (VQ35DE Models for AWD)" or AT- 1 8 , "Cross-
Sectional View (VK45DE Models for AWD)") AT- 2 6 7
16. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 6 , "
Cross-
Sectional View (2WD Models)", AT- 1 7 , "Cross-Sectional View
(VQ35DE Models for AWD)" or AT- 1 8 , "Cross-Sectional View
(VK45DE Models for AWD)") AT- 2 6 7
44
Vehicle cannot run in
all positions. ON vehicle1. A/T fluid level and state
AT- 4 9
2. Line pressure testAT- 4 9
3. PNP switchAT- 1 0 2
4. A/T positionAT- 2 0 7
5. Control valve with TCMAT- 2 1 5
OFF vehicle6. Oil pump assembly
AT- 2 8 57. Gear systemAT- 2 4 9
8. Output shaftAT- 2 6 7
No. Items Symptom Condition Diagnostic Item Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

TROUBLE DIAGNOSISAT-77
< SERVICE INFORMATION >
DE
F
G H
I
J
K L
M A
B
AT
N
O P
45
Slips/Will
Not En-
gage With selector lever in
“D” position, driving is
not possible. ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Line pressure testAT- 4 9
3. PNP switchAT- 1 0 2
4. A/T positionAT- 2 0 7
5. Control valve with TCMAT- 2 1 5
OFF vehicle6. Torque converter
AT- 2 6 7
7. Oil pump assemblyAT- 2 8 5
8. 1st one-way clutchAT- 2 9 5
9. Gear systemAT- 2 4 9
10. Reverse brakeAT- 2 6 7
11. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to AT-
16, "Cross-Sectional View (2WD Models)", AT- 1 7 , "Cross-
Sectional View (VQ35DE Models for AWD)" or AT- 1 8 , "Cross-
Sectional View (VK45DE Models for AWD)") AT- 2 6 7
12. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 6 , "
Cross-
Sectional View (2WD Models)", AT- 1 7 , "Cross-Sectional View
(VQ35DE Models for AWD)" or AT- 1 8 , "Cross-Sectional View
(VK45DE Models for AWD)") AT- 2 6 7
46
With selector lever in
“R” position, driving is
not possible. ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Line pressure testAT- 4 9
3. PNP switchAT- 1 0 2
4. A/T positionAT- 2 0 7
5. Control valve with TCMAT- 2 1 5
OFF vehicle6. Gear system
AT- 2 4 97. Output shaftAT- 2 6 7
8. Reverse brakeAT- 2 6 7
47Does Not
Change Does not change M5
→
M4.
Refer to AT- 1 9 6 , "A/T
Does Not Shift: 5th
Gear → 4th Gear".ON vehicle 1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle 7. Front brake (brake band) AT- 2 6 7
No. Items Symptom Condition Diagnostic Item Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

TROUBLE DIAGNOSISAT-79
< SERVICE INFORMATION >
DE
F
G H
I
J
K L
M A
B
AT
N
O P
53
Others Shift point is low in “D”
position.
ON vehicle1. Vehicle speed sensor A/T and vehicle speed sensor MTR
AT- 1 0 8
,
AT- 1 3 7
2. Accelerator pedal position sensor AT- 1 3 0
3. CAN communication line AT- 9 4
4. Control valve with TCMAT- 2 1 5
54Judder occurs during
lock-up. ON vehicle1. A/T fluid level and state
AT- 4 9
2. Engine speed signalAT- 11 2
3. Turbine revolution sensorAT- 1 0 6
4. Vehicle speed sensor A/T and vehicle speed sensor MTRAT- 1 0 8,
AT- 1 3 7
5. Accelerator pedal position sensor AT- 1 3 0
6. CAN communication line AT- 9 4
7. Torque converter clutch solenoid valveAT- 1 2 4
8. Control valve with TCMAT- 2 1 5
OFF vehicle 9. Torque converter AT- 2 6 7
55Strange noise in “R”
position. ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Engine speed signalAT- 11 2
3. CAN communication line AT- 9 4
4. Control valve with TCMAT- 2 1 5
OFF vehicle5. Torque converter
AT- 2 6 7
6. Oil pump assemblyAT- 2 8 5
7. Gear systemAT- 2 4 9
8. High and low reverse clutchAT- 3 0 1
9. Reverse brakeAT- 2 6 7
56Strange noise in “N”
position. ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Engine speed signalAT- 11 2
3. CAN communication line AT- 9 4
4. Control valve with TCMAT- 2 1 5
OFF vehicle5. Torque converter
AT- 2 6 76. Oil pump assemblyAT- 2 8 5
7. Gear systemAT- 2 4 9
No. Items Symptom Condition Diagnostic Item Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

AT-80
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS
57Others Strange noise in “D”
position.
ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Engine speed signalAT- 11 2
3. CAN communication line AT- 9 4
4. Control valve with TCMAT- 2 1 5
OFF vehicle5. Torque converter
AT- 2 6 7
6. Oil pump assemblyAT- 2 8 5
7. Gear systemAT- 2 4 9
8. Forward brake (Parts behind drum support is impossible to
perform inspection by disassembly. Refer to AT- 1 6 , "
Cross-
Sectional View (2WD Models)", AT- 1 7 , "Cross-Sectional View
(VQ35DE Models for AWD)" or AT- 1 8 , "Cross-Sectional View
(VK45DE Models for AWD)") AT- 2 6 7
58Vehicle does not de-
celerate by engine
brake.
Refer to
AT- 2 0 2 , "Ve-
hicle Does Not Decel-
erate by Engine
Brake". ON vehicle
1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle7. Input clutch
AT- 2 8 98. High and low reverse clutchAT- 3 0 1
9. Direct clutchAT- 3 0 3
59Engine brake does not
work M5
→ M4. ON vehicle 1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle 7. Front brake (brake band) AT- 2 6 7
60Engine brake does not
work M4
→ M3. ON vehicle 1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle7. Front brake (brake band)
AT- 2 6 78. Input clutchAT- 2 8 9
No. Items Symptom Condition Diagnostic Item Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

TROUBLE DIAGNOSISAT-81
< SERVICE INFORMATION >
DE
F
G H
I
J
K L
M A
B
AT
N
O P61
Others Engine brake does not
work M3
→ M2. ON vehicle 1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle7. Front brake (brake band)
AT- 2 6 78. Input clutchAT- 2 8 9
9. High and low reverse clutchAT- 3 0 1
62Engine brake does not
work M2
→ M1. ON vehicle 1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Manual mode switchAT- 1 5 5
5. CAN communication line AT- 9 4
6. Control valve with TCMAT- 2 1 5
OFF vehicle7. Input clutch
AT- 2 8 98. High and low reverse clutchAT- 3 0 1
9. Direct clutchAT- 3 0 3
63 Maximum speed low.ON vehicle
1. A/T fluid level and state
AT- 4 9
2. Line pressure testAT- 4 9
3. Accelerator pedal position sensorAT- 1 3 0
4. CAN communication line AT- 9 4
5. Direct clutch solenoid valveAT- 1 4 7
6. Control valve with TCMAT- 2 1 5
OFF vehicle7. Torque converter
AT- 2 6 7
8. Oil pump assemblyAT- 2 8 5
9. Input clutchAT- 2 8 9
10. Gear systemAT- 2 4 9
11. High and low reverse clutchAT- 3 0 1
12. Direct clutchAT- 3 0 3
13. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to AT-
16, "Cross-Sectional View (2WD Models)", AT- 1 7 , "Cross-
Sectional View (VQ35DE Models for AWD)" or AT- 1 8 , "Cross-
Sectional View (VK45DE Models for AWD)") AT- 2 6 7
14. Forward brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 6 , "
Cross-
Sectional View (2WD Models)", AT- 1 7 , "Cross-Sectional View
(VQ35DE Models for AWD)" or AT- 1 8 , "Cross-Sectional View
(VK45DE Models for AWD)") AT- 2 6 7
No. Items Symptom Condition Diagnostic Item
Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

AT-82
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS
64Others Extremely large creep.
ON vehicle1. Engine idle speed EC-84
(for
VQ35DE)
or EC-661

(for
VK45DE)
2. CAN communication line AT- 9 4
OFF vehicle 3. Torque converter AT- 2 6 7
65With selector lever in
“P” position, vehicle
does not enter parking
condition or, with se-
lector lever in another
position, parking con-
dition is not cancelled.
Refer to
AT- 1 7 1 , "
In
"P" Position, Vehicle
Moves When
Pushed". ON vehicle
1. PNP switch
AT- 1 0 2
2. A/T positionAT- 2 0 7
OFF vehicle 3. Parking pawl components AT-
226(2WD
models) or AT- 2 6 7

(AWD
models)
66 Vehicle runs with A/T
in “P” position. ON vehicle
1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Control valve with TCMAT- 2 1 5
OFF vehicle5. Parking pawl components AT-
226(2WD
models) or AT- 2 6 7

(AWD
models)
6. Gear system AT- 2 4 9
67Vehicle runs with A/T
in “N” position.
Refer to
AT- 1 7 2 , "In
"N" Position, Vehicle
Moves". ON vehicle
1. PNP switch
AT- 1 0 2
2. A/T fluid level and state AT- 4 9
3. A/T positionAT- 2 0 7
4. Control valve with TCMAT- 2 1 5
OFF vehicle5. Input clutch
AT- 2 8 9
6. Gear systemAT- 2 4 9
7. Direct clutchAT- 3 0 3
8. Reverse brakeAT- 2 6 7
9. Forward one-way clutch (Parts behind drum support is im-
possible to perform inspection by disassembly. Refer to AT-
16, "Cross-Sectional View (2WD Models)", AT- 1 7 , "Cross-
Sectional View (VQ35DE Models for AWD)" or AT- 1 8 , "Cross-
Sectional View (VK45DE Models for AWD)") AT- 2 6 7
10. Low coast brake (Parts behind drum support is impossible
to perform inspection by disassembly. Refer to
AT- 1 6 , "
Cross-
Sectional View (2WD Models)", AT- 1 7 , "Cross-Sectional View
(VQ35DE Models for AWD)" or AT- 1 8 , "Cross-Sectional View
(VK45DE Models for AWD)") AT- 2 6 7
No. Items Symptom Condition Diagnostic Item
Reference
page
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

AT-92
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS
1.CHECK A/T CHECK INDICATOR LAMP
1. Start the engine with selector lever in “P” pos ition. Warm engine to normal operating temperature.
2. Turn ignition switch ON and OFF at least twice, then leave it in the OFF position.
3. Wait 10 seconds.
4. Turn ignition switch ON. (Do not start engine.)
Does A/T CHECK indicator lamp come on for about 2 seconds?
YES >> GO TO 2.
NO >> Go to AT-170, "
A/T Check Indicator Lamp Does Not Come On".
2.JUDGEMENT PROCEDURE
1. Turn ignition switch OFF.
2. Keep pressing shift lock release button.
3. Move selector lever from “P” to “D” position.
4. Release accelerator pedal. (Set the closed throttle position signal ON.)
5. Depress brake pedal. (Stop lamp switch signal ON.)
6. Turn ignition switch ON. (Do not start engine.)
7. Wait 3 seconds.
8. Move the selector lever to the manual shift gate side. (Manual mode signal ON.)
9. Release brake pedal. (Stop lamp switch signal OFF.)
10. Move the selector lever to “D” position. (Manual mode signal OFF.)
11. Depress brake pedal. (Stop lamp switch signal ON.)
12. Release brake pedal. (Stop lamp switch signal OFF.)
13. Depress accelerator pedal fully and release it.
>> GO TO 3.
3.CHECK SELF-DIAGNOSIS CODE
Check A/T CHECK indicator lamp. Refer to "Judgement Self-diagnosis Code".
If the system does not go into self-diagnostics. Refer to AT-102
, AT-155, AT-164, AT-165.
>> DIAGNOSIS END
Judgement Self-diagnosis Code
If there is a malfunction, the lamp lights up fo r the time corresponding to the suspect circuit.
No. Malfunctioning item No. Malfunctioning item
1 Revolution sensor AT- 1 0 8
12 A/T interlock AT- 1 3 9
2 Direct clutch solenoid valve AT- 1 4 713 A/T 1st engine braking AT-141
3 Torque converter clutch solenoid valve AT- 1 2 4, AT- 1 2 614 Start signal AT- 9 7
4 Line pressure solenoid valve AT- 1 2 815 Accelerator pedal position sensor AT- 1 3 0
5 Input clutch solenoid valve AT- 1 4 316 Engine speed signal AT- 11 2
6 Front brake solenoid valve AT- 1 4 517 CAN communication line AT- 9 4
7 Low coast brake solenoid valve AT- 1 5 1, AT- 1 5 318 1st gear function AT- 11 4
8 High and low reverse clutch solenoid valve AT- 1 4 919 2nd gear function AT- 11 6
9 PNP switch AT- 1 0 220 3rd gear function AT- 11 8
10 A/T fluid temperature sensor AT-13221 4th gear function AT- 1 2 0
11 Turbine revolution sensor AT- 1 0 622 5th gear function AT- 1 2 2
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C

AT-202
< SERVICE INFORMATION >
TROUBLE DIAGNOSIS FOR SYMPTOMS
2. Check A/T fluid condition. Refer to AT-49, "Inspections Before
Trouble Diagnosis".
OK or NG
OK >> GO TO 6.
NG >> GO TO 9.
6.DETECT MALFUNCTIONING ITEM
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to AT-59,
"Symptom Chart" (Symptom No.50).
OK or NG
OK >> GO TO 7.
NG >> Repair or replace damaged parts.
7.CHECK SYMPTOM
Check again. Refer to AT-53, "
Road Test".
OK or NG
OK >> INSPECTION END
NG >> GO TO 8.
8.CHECK TCM
1. Check TCM input/output signals. Refer to AT-83, "
TCM Input/Output Signal Reference Value".
2. If NG, recheck A/T assembly harness connector terminals for damage or loose connection with harness
connector.
OK or NG
OK >> INSPECTION END
NG >> Repair or replace damaged parts.
9.DETECT MALFUNCTIONING ITEM
Check the malfunction items. If any items are damaged, repair or replace damaged parts. Refer to AT-59,
"Symptom Chart" (Symptom No.50).
OK or NG
OK >> GO TO 7.
NG >> Repair or replace damaged parts.
Vehicle Does Not Decele rate by Engine BrakeINFOID:0000000001327382
SYMPTOM:
No engine brake is applied when the gear is shifted from the 2nd to 1st gear.
DIAGNOSTIC PROCEDURE
1.CHECK SELF-DIAGNOSTIC RESULTS
With CONSULT-III
 Perform self-diagnosis.
Without CONSULT-III
 Perform self-diagnosis. Refer to AT-91, "
Diagnosis Procedure without CONSULT-III".
Is any malfunction detected by self-diagnostic results?
YES >> Check the malfunctioning system. Refer to AT-84, "CONSULT-III Function (TRANSMISSION)",
AT-91, "
Diagnosis Procedure without CONSULT-III".
NO >> GO TO 2.
SCIA5199E
3AA93ABC3ACD3AC03ACA3AC03AC63AC53A913A773A893A873A873A8E3A773A983AC73AC93AC03AC3
3A893A873A873A8F3A773A9D3AAF3A8A3A8C3A863A9D3AAF3A8B3A8C