U151E AUTOMATIC TRANSAXLE – DIFFERENTIAL CASEAX–273
AX
(g) Remove the differential assembly.
8. INSTALL FRONT DIFFERENTIAL RING GEAR
(a) Using ATF and heater, heat the front differential ring
gear to 90 to 110
C (194.0 to 230.0F).
NOTICE:
Do not heat the ring gear to more than 110
C
(230.0
F).
(b) Clean the contact surface of the front differential
case.
(c) Align the matchmarks, and install the front
differential ring gear case quickly.
NOTICE:
Do not install the bolts while the ring gear is hot.
(d) Tighten the 14 bolts.
Torque: 95.0 N*m (970 kgf*cm, 70 ft.*lbf)
NOTICE:
Tighten the bolts a little at a time in a diagonal
pattern.
9. INSTALL TRANSAXLE HOUSING OIL SEAL
(a) Using SST and a hammer, install a new oil seal.
SST 09223-15020, 09950-70010 (09951-07150)
(b) Coat the lip of oil seal with a little MP grease.
Oil seal installation depth:
0 +- 0.5 mm (0 +- 0.0197 in.)
D026450E04
D025215E02
D026445E04
D026446
D026451E01
